Fernco QF-150-KIT3

Fernco QwikFlex Pipe Connector Kit User Manual

Model: QF-150-KIT3

Ievads

This manual provides detailed instructions for the installation and use of the Fernco QwikFlex Pipe Connector Kit. This kit is designed to confidently connect misaligned or hard-to-reach drain, waste, and vent (DWV) pipes.

Fernco QwikFlex Pipe Connector Kit components and an example uzstādīšana.

Image: The Fernco QwikFlex Pipe Connector Kit, showing the flexible couplings, 45-degree connector, straight connector, and an example of the kit installed in a wall cavity connecting a pipe to a vent.

Produkts beidziesview

The Fernco QwikFlex Pipe Connection Kit is engineered for ease of use and reliable performance in DWV applications. It eliminates the need for primers, glues, or special tools, simplifying pipe connections.

Galvenās funkcijas:

Components of the Fernco QwikFlex Pipe Connector Kit, including two flexible couplings, a 45-degree connector, and a straight connector.

Attēls: Tuvplāns view of the kit's components: two flexible pipe sections with clamps, a 45-degree elbow adapter, and a straight adapter.

Diagram illustrating the flexible XL pipe connector system with dimensions and rigid adapters.

Image: A diagram showing the 12-inch height of the flexible coupling and the rigid adapters (45-degree connector and straight thru connector) with their 1 1/2 inch ID.

Drošības informācija

It is crucial to understand the intended use and limitations of the Fernco QwikFlex Pipe Connector Kit to ensure safe and effective installation.

Warning: Not for pressure applications. Drain, Waste, & Vent (DWV) only. Maximum 4.3 PSI.

Image: A red warning sign stating "NOT FOR PRESSURE APPLICATIONS" and "DRAIN, WASTE, & VENT (DWV) ONLY" with a maximum pressure rating of "MAXIMUM 4.3 PSI".

Svarīgi: This product is specifically designed for Drain, Waste, and Vent (DWV) applications only. It is NAV suitable for pressure applications. Ensure the system pressure does not exceed 4.3 PSI.

Always consult local codes and authorities prior to installation to ensure compliance with all applicable regulations.

Uzstādīšana un uzstādīšana

The QwikFlex Pipe Connector Kit is designed for straightforward installation. Follow these steps for a secure and leak-proof connection.

Uzstādīšanas soļi:

  1. Prepare the Couplings: Tighten all bands on the QwikFlex couplings to 60 inch-pounds before installation.
  2. Izmērīt un izgriezt: Measure the required length for your connection. QwikFlex couplings can be cut to length as needed. Ensure clean, straight cuts.
  3. Izlīdzināt un ievietot: Align the QwikFlex couplings to determine where to cut. Insert the cut coupling into the existing pipes or fittings.
  4. Fasten Connections: Insert the cut coupling into the QwikFlex couplings and tighten the bands to 60 inch-pounds.
  5. Noplūžu pārbaude: After installation, thoroughly test the system for any leaks.

Piezīme: Straight and 45-degree connectors increase versatility. QwikFlex components are not intended to support other pipe or fittings; support and brace the assembly as well as the pipe and fittings they are connected to.

Do not over-flex the QwikFlex couplings, as this could cause them to kink and create an obstruction.

Diagram showing installation instructions for Fernco QwikFlex, including steps for cutting, inserting, and tightening.

Image: A detailed diagram illustrating the installation process, including measurements and the proper way to connect the flexible couplings and adapters.

Instalācijas video:

Video: Oficiāls paziņojumsview of the QwikFlex Flexible Pipe Connector Kit, demonstrating its features and ease of installation for joining offset pipes.

Darbības principi

Once properly installed, the Fernco QwikFlex Pipe Connector Kit provides a durable and flexible connection for DWV systems. Its elastomeric polyvinyl chloride (PVC) construction ensures resilience against soil conditions, and it is designed to be leak-proof and root-proof.

The flexible nature of the couplings allows for joining pipes with minor misalignments, up to 20-degree offsets, making it ideal for challenging installations where rigid fittings may not suffice.

Apkope

The Fernco QwikFlex Pipe Connector Kit is designed for long-lasting, maintenance-free performance once installed correctly.

Problēmu novēršana

Most issues with the QwikFlex Pipe Connector Kit can be resolved by ensuring proper installation. Here are some common troubleshooting tips:

ProblēmaIespējamais cēlonisRisinājums
Leaks at Connection Points
  • Insufficient tightening of clamps.
  • Improperly cut pipe ends.
  • Damage to the coupling.
  • Excessive pipe misalignment.
  • Nodrošiniet clamps are tightened to 60 inch-pounds.
  • Re-cut pipe ends to be clean and straight.
  • Inspect coupling for damage; replace if necessary.
  • Verify pipe alignment is within 20-degree offset.
Reduced Flow/Blockage
  • Over-flexing of the coupling causing kinking.
  • Debris accumulation.
  • Ensure coupling is not excessively bent.
  • Clear any blockages in the pipe system.
Coupling Slipping Off Pipe
  • Clampnav pietiekami pievilkts.
  • Incorrect pipe size.
  • Atkārtoti pievelcietamps to specified torque.
  • Verify pipe diameter matches the 1-1/2" SCH40 PVC pipe requirement.

Specifikācijas

AtribūtsDetaļas
Modeļa numursQF-150-KIT3
Izmērs1.5 collas
MateriālsPVC (Elastomeric Polyvinyl Chloride)
KrāsaMelns
Savienotāja veidsSakabe
Vītnes izmērs1.5 collas
Ārējā apdareNerūsējošais tērauds (Clamps)
Preces svars1 mārciņas
Gabalu skaits5 (2 flexible couplings, 1 45-degree connector, 1 straight connector, plus clamps)
RažotājsFernco
UPC018578050075
Standarta atbilstībaMeets ASTM C1173 Standard
Offset FlexibilityUp to 20-degree offsets

Garantijas informācija

For detailed warranty information regarding the Fernco QwikFlex Pipe Connector Kit, please refer to the official Fernco webvietnē vai sazinieties tieši ar klientu atbalsta dienestu. Garantijas noteikumi un nosacījumi var atšķirties.

Fernco products are generally known for their durability and are backed by decades of proven performance.

Atbalsts

If you require further assistance or have questions not covered in this manual, please contact Fernco customer support:

Saistītie dokumenti — QF-150-KIT3

Iepriekšview Fernco AccessPoint ūdensnecaurlaidīgu cauruļu piekļuves un aizbāžņu risinājuma uzstādīšanas rokasgrāmata
Soli pa solim Fernco AccessPoint ūdensnecaurlaidīgā cauruļu piekļuves un aizbāžņa risinājuma (XP-1) uzstādīšanas instrukcijas, tostarp svarīgas piezīmes un resursi.
Iepriekšview Fernco PlumbQwik elastīgie cauruļu savienojumi — produktu klāsts un specifikācijas
Iepazīstieties ar Fernco PlumbQwik elastīgo PVC cauruļu savienojumu klāstu santehnikai un kanalizācijai. Atrodiet taisnus savienojumus, adapterus, līkumus, T veida savienojumus, uzgaļus un piederumus dažādiem cauruļu materiāliem un pielietojumiem.
Iepriekšview Fernco Product Catalog: Comprehensive Guide to Pipe Couplings and Drainage Solutions
Explore the Fernco Product Catalog, featuring a wide range of high-quality flexible couplings, connectors, seals, and water management solutions for plumbing and drainage applications. Discover durable, reliable products designed for professional and residential use.
Iepriekšview Fernco produktu katalogs: Santehnikas elastīgās savienojuma daļas
Iepazīstieties ar visaptverošo Fernco produktu katalogu, kurā ir plašs santehnikas elastīgo savienojumu klāsts, tostarp standarta, specializētie un augsta griezes momenta varianti. Atrodiet risinājumus kanalizācijas, notekūdeņu un ķīmisko atkritumu lietojumprogrammām ar detalizētām specifikācijām un informāciju par produktu.
Iepriekšview TAB Li-Ion Batteries User Manual - Lithium Iron Phosphate
Comprehensive user manual for TAB Li-Ion Batteries, featuring Lithium Iron Phosphate (LiFePO4) technology. Covers installation, operation, charging, maintenance, specifications, and warranty for 6.4V, 12.8V, and 25.6V models. Includes product list and safety guidelines.