Xigmatek LUX S Arctic Mid-Tower PC Case EN48298 Instruction Manual

1. Produkts beidziesview

The Xigmatek LUX S Arctic (Model EN48298) is a mid-tower PC case designed for computer enthusiasts and gamers. It features a distinctive triangular mesh front panel for optimal airflow and comes equipped with four 120mm X24A A-RGB fans to provide efficient cooling and customizable lighting. The case supports Micro ATX motherboards and is constructed with durable materials, including tempered glass for a clear view iekšējo komponentu.

1.1. attēls: Priekšpuse view of the Xigmatek LUX S Arctic PC case, showcasing the triangular mesh design and the pre-installed A-RGB fans.

2. Iepakojuma saturs

Before proceeding with installation, please ensure all components listed below are present in your package. If any items are missing or damaged, contact your retailer or Xigmatek support.

• Xigmatek LUX S Arctic Mid-Tower PC Case
• 4 x 120mm X24A A-RGB Fans (pre-installed)
• Accessory box (screws, cable ties, standoffs, user manual)

3. Iestatīšana un instalēšana

Follow these steps to install your computer components into the Xigmatek LUX S Arctic PC case. Ensure your system is powered off and unplugged before beginning any installation.

3.1. Lietas sagatavošana

1. Novietojiet korpusu uz līdzenas, stabilas virsmas.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and gently pulling the panel away.
3. Remove the opposite side panel (metal) in a similar manner to access the cable management area.

3.1. attēls: Interjers view of the PC case, illustrating the spacious layout for component installation.

3.2. Mātesplates uzstādīšana

1. Install the I/O shield that came with your motherboard into the designated opening at the rear of the case.
2. Align your Micro ATX motherboard with the pre-installed standoffs. Ensure all screw holes on the motherboard match the standoffs.
3. Secure the motherboard using the provided screws from the accessory box. Do not overtighten.

3.3. Barošanas bloka (PSU) uzstādīšana

1. Locate the PSU mounting area at the rear bottom of the case.
2. Slide your PSU into the bay from the rear, ensuring the fan faces the bottom (if the case has a filtered intake) or upwards.
3. Secure the PSU with screws from the outside rear of the case.

3.4. Krātuves diska instalēšana

The case supports various storage configurations. Refer to the accessory box for specific mounting hardware.

• 2.5 collu SSD diski: Mount SSDs to the designated brackets behind the motherboard tray.
• 3.5 collu cietie diski: Ievietojiet cietos diskus disku kārbā, kas atrodas zem barošanas bloka pārsega.

3.2. attēls: Aizmugurējais salons view, highlighting cable management cutouts and storage drive mounting locations.

3.5. Expansion Card Installation (GPU, etc.)

1. Noņemiet nepieciešamos PCIe slotu pārsegus no korpusa aizmugures.
2. Insert your expansion card (e.g., graphics card) into the corresponding PCIe slot on your motherboard until it clicks into place.
3. Secure the card with a screw to the case chassis.

3.6. Kabeļu pārvaldība un savienojumi

Connect all necessary cables from the PSU to your motherboard and components. Utilize the cable routing cutouts and tie-down points behind the motherboard tray for a clean build and improved airflow.

• Connect front panel headers (Power SW, Reset SW, HDD LED, Power LED) to the motherboard.
• Connect USB 2.0 and USB 3.0 headers to the motherboard.
• Connect audio header to the motherboard.
• Connect the pre-installed A-RGB fans to your motherboard's A-RGB header or a compatible controller. Ensure power is supplied to the fan hub/controller if applicable.

4. Lietošanas instrukcijas

Kad visas sastāvdaļas ir uzstādītas un kabeļi ir pievienoti, varat ieslēgt sistēmu.

1. Replace both side panels and secure them with their respective screws.
2. Pievienojiet monitoru, tastatūru, peli un strāvas kabeli datora aizmugurē.
3. Pārslēdziet barošanas bloka ieslēgšanas slēdzi pozīcijā “ON”.
4. Press the power button on the front panel of the case.
5. The pre-installed A-RGB fans will illuminate. You can control their lighting effects via your motherboard's software (if connected to an A-RGB header) or a dedicated controller (if included with the fans or purchased separately).

5. Apkope

Regulāra apkope palīdz nodrošināt datora komponentu optimālu veiktspēju un ilgmūžību.

• Putekļu filtri: The Xigmatek LUX S Arctic case likely includes removable dust filters (e.g., top, bottom, front). Clean these filters every 1-3 months, depending on your environment, by gently brushing or washing them with water and allowing them to dry completely before reinstallation.
• Salona tīrīšana: Periodically (every 6-12 months), open the case and use compressed air to remove dust buildup from fans, heatsinks, and other components. Hold fan blades gently to prevent them from spinning too fast during cleaning.
• Ārpuses tīrīšana: Noslaukiet ārējās virsmas ar mīkstu, damp cloth. Avoid harsh chemicals that may damage the finish or tempered glass.

6. Traucējummeklēšana

If you encounter issues with your PC build, refer to these common troubleshooting steps.

• Sistēma neieslēdzas:
  • Pārliecinieties, vai barošanas bloka slēdzis ir ieslēgts (“ON”).
  • Check all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected.
  • Verify front panel power switch header is correctly connected to the motherboard.
• Ventilatori negriežas/RGB neiedegas:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure A-RGB cables are correctly connected to the motherboard's A-RGB header or controller.
  • Verify that any fan hub or controller is receiving power.
• Nav displeja izvades:
  • Ensure your monitor cable is connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics).
  • Ievietojiet grafikas karti atpakaļ PCIe slotā.
  • Check graphics card power connections.

For more complex issues, consult your motherboard manual or component manufacturer's support resources.

7. Specifikācijas

8. Garantija un atbalsts

For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Xigmatek webvietne.

Visit Xigmatek Official Webvietne