Ievads
This manual provides essential information for the proper installation, operation, and maintenance of your HEIMAN WS-720ES Wi-Fi Carbon Monoxide Detector. Please read it thoroughly before use and retain it for future reference.
Svarīga drošības informācija
Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that can be fatal. This detector is designed to alert you to the presence of CO gas. It is not a substitute for proper maintenance of fuel-burning appliances or adequate ventilation.
- Nekad neignorējiet modinātāju. Investigate the source of the CO.
- Nekrāsojiet detektoru. Paint can clog the sensor openings and prevent the alarm from functioning properly.
- Do not block the detector's vents.


Produkts beidziesview
The HEIMAN WS-720ES is a compact, portable Wi-Fi enabled carbon monoxide detector designed for various environments. It features a clear 85 dB alarm and LED indicators for status.



Uzstādīšana
The detector can be installed on flat surfaces or walls. Choose a location where CO is likely to accumulate, such as near fuel-burning appliances, but not directly above them or in areas with high humidity or extreme temperatures.
- Montāža: Use the provided screws and wall plugs to secure the mounting plate to a wall or ceiling. Alternatively, the detector can be placed on a flat surface.
- Akumulatora uzstādīšana: Insert the two AA batteries into the battery compartment. Ensure correct polarity. The device will perform a self-test upon power-up.
- Izvietojums: For optimal detection, place the detector at eye level (approximately 1.5 to 1.7 meters from the floor) in areas with potential CO sources. Avoid corners or areas obstructed by furniture.

Wi-Fi Connection and App Integration
This detector connects to your home Wi-Fi network (2.4 GHz) and integrates with the Tuya or Smartlife application for remote monitoring and notifications.
- Lejupielādēt lietotni: Lejupielādējiet lietotni “Tuya Smart” vai “Smart Life” no viedtālruņa lietotņu veikala.
- Reģistrēties/Pieslēgties: Izveidojiet kontu vai piesakieties savā esošajā kontā.
- Pievienot ierīci: In the app, select "Add Device" and follow the on-screen instructions to add the Carbon Monoxide Detector. You may need to press the test button three times consecutively to put the device into pairing mode.
- Apstiprinājums: Once connected, the app will display the device status and allow you to receive real-time alerts and view CO concentration levels.

Detektora darbība
LED indikatori:
- Zaļa gaismas diode (barošana): Flashes every 30 seconds, indicating normal operation.
- Sarkana gaismas diode (trauksme): Flashes rapidly with an audible alarm when CO is detected.
- Yellow LED (Fault/Low Battery): Norāda kļūmi vai zemu akumulatora uzlādes līmeni.
Detektora pārbaude:
Press and hold the "Test/Silence" button for a few seconds. The alarm will sound, and the red LED will flash, indicating the unit is functioning correctly. A notification should also appear in your connected app.
Silencing an Alarm:
In case of a CO alarm, press the "Test/Silence" button to temporarily silence the audible alarm. The red LED will continue to flash until CO levels return to normal. If the alarm persists, evacuate the area immediately.

Apkope
- Akumulatora nomaiņa: The detector uses 2 AA batteries with an estimated life of 5 years. When the yellow LED indicates low battery, replace both batteries with new ones.
- Tīrīšana: Regulāri tīriet detektora ārpusi ar mīkstu, sausu drānu.amp audums. Neizmantojiet tīrīšanas līdzekļus vai šķīdinātājus.
- Regulāra pārbaude: Test the detector weekly by pressing the "Test/Silence" button.
Problēmu novēršana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Detektors neieslēdzas. | Nepareizi ievietotas vai izlādējušās baterijas. | Pārbaudiet bateriju polaritāti; nomainiet baterijas. |
| Dzeltena LED mirgo. | Low battery or internal fault. | Replace batteries. If issue persists, contact support. |
| Nevar izveidot savienojumu ar Wi-Fi/lietotni. | Incorrect Wi-Fi password, 5GHz network, or device not in pairing mode. | Ensure 2.4GHz Wi-Fi, re-enter password, put device in pairing mode (press test button 3 times). |
| Trauksmes signāls skan bieži bez redzama CO. | False alarm due to strong fumes (e.g., cleaning products) or detector placement. | Relocate the detector away from sources of fumes. Ensure proper ventilation. |
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Modeļa numurs | WS-720ES |
| Barošanas avots | DC 2*1.5V Alkaline AA LR6 batteries |
| Sensora kalpošanas laiks | Maks. 10 gadi |
| Darba temperatūra | -10°C līdz +40°C |
| Darba mitrums | 0% ~ 95% RH nav kondensējošs |
| Signalizācijas skaņas līmenis | ≥85dB at 3m |
| Trauksmes izeja | Vizuāla un skaņas indikācija |
| Iesildīšanās periods | Apm. 100 sekundes |
| Montāžas metode | Montāža pie sienas vai pie griestiem |
| Atbilstības standarts | EN 50291-1:2018 |
| Akumulatora darbības laiks | 5 gadi |
| Izmēri | 83 mm x 83 mm x 23 mm (aptuveni) |
| Svars | 230g |
Garantija un atbalsts
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official HEIMAN webvietne. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.





