VEVOR Continuous Bag Band Sealing Machine 900MLP User Manual

1. Ievads

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your VEVOR Continuous Bag Band Sealing Machine, Model 900MLP. This machine is designed for continuous sealing of various plastic bags and films, offering reliable performance for packaging needs. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury.

2. Drošības instrukcijas

BRĪDINĀJUMS: Failure to follow these safety instructions may result in serious injury or damage to the equipment.

• Always ensure the machine is properly grounded before use.
• Nelietojiet ierīci ar mitrām rokām vai damp nosacījumiem.
• Keep hands, hair, and loose clothing away from moving parts, especially the conveyor belt and sealing area.
• Disconnect power before performing any maintenance, cleaning, or when the machine is not in use.
• Do not attempt to modify the machine. Use only original VEVOR replacement parts.
• Darbības laikā nodrošiniet pietiekamu ventilāciju ap ierīci.
• Turiet bērnus un nepiederošas personas prom no darbības zonas.
• The sealing bars become hot during operation. Avoid direct contact to prevent burns.

3. Produkts beidziesview

3.1 Galvenās funkcijas

• Ātra blīvēšana: High-power 600W design for stable, efficient sealing with durable carbon steel construction.
• Versatile Bag Compatibility: Adjustable sealing widths from 0.24 to 0.47 inches (6-12 mm) for various bag types.
• Uzlabota funkcionalitāte: Supports embossing and alphanumeric printing (with optional rollers). Adjustable sealing speeds up to 0-52.49 ft/min (0-16 m/min).
• Pilnīgi aksesuāri: Includes toothed belts, Teflon belts, and a fuse for maintenance.
• Vienkārša darbība: Intuitive panel controls for adjusting parameters like temperature and speed.

3.2 Sastāvdaļas

Familiarize yourself with the main components of the VEVOR Continuous Bag Band Sealing Machine:

• Vadības panelis: Contains power switch, heater switch, fan switch, speed knob, and digital temperature controller.
• Konveijera lente: Transports bags through the sealing process.
• Blīvēšanas mehānisms: Includes heating and cooling elements for secure seals.
• Height Adjustment Knob: Allows adjustment of the sealing head height for different bag sizes.
• Embossing/Printing Rollers: (Optional/Included) For adding dates or codes to seals.

Figure 1: Control panel of the VEVOR Continuous Band Sealer, showing power, heater, fan switches, speed knob, and digital temperature controller.

2. attēls: iekšējais view of the VEVOR Continuous Band Sealer, illustrating the heating and cooling elements for secure sealing.

4. Iestatīšana

1. Izpakošana: Uzmanīgi izņemiet ierīci un visus piederumus no iepakojuma. Pārbaudiet, vai nav radušies transportēšanas bojājumi.
2. Izvietojums: Place the machine on a stable, level surface capable of supporting its weight (approximately 26.12 lbs / 11.85 kg). Ensure sufficient space around the machine for operation and ventilation.
3. Strāvas pieslēgums: Connect the power cord to a grounded 110V AC outlet. Ensure the power switch on the control panel is in the OFF position before plugging in.
4. Konveijera lentes regulēšana: The conveyor belt is pre-installed. Ensure it runs smoothly and is properly aligned.
5. Augstuma regulēšana: Adjust the height of the sealing head using the adjustment knob to match the height of your bags. The bag height range is 4.72-9.65 inches (120-245 mm).
6. Optional Embossing/Printing: If using embossing rollers, install them according to the separate instructions provided with the rollers.

Figure 3: The VEVOR Continuous Band Sealer shown with its included accessories, ready for setup.

5. Lietošanas instrukcijas

1. Ieslēgšana: Turn on the main power switch on the control panel.
2. Iestatīt temperatūru: Use the digital temperature controller to set the desired sealing temperature. The temperature range is 32-572°F (0-300°C). The optimal temperature depends on the bag material and thickness. Start with a lower temperature and gradually increase if needed.
3. Activate Heater and Fan: Turn on the HEATER switch. Allow the machine to preheat until the set temperature is reached (indicated on the digital display). Once the heater is on, also turn on the FAN switch to ensure proper cooling after sealing.
4. Pielāgot ātrumu: Use the SPEED knob to set the conveyor belt speed. The sealing speed can be adjusted from 0-52.49 ft/min (0-16 m/min). Adjust the speed based on the bag material and desired seal quality. Slower speeds generally result in stronger seals.
5. Test Sealing: Before sealing actual products, perform test seals on empty bags to verify temperature and speed settings. Adjust as necessary to achieve a strong, consistent seal.
6. Feed Bags: Place the open end of the bag onto the conveyor belt, guiding it into the sealing mechanism. The machine will continuously feed and seal the bags.
7. Monitora darbība: Continuously monitor the sealing process to ensure consistent seal quality and proper bag feeding.
8. Izslēgt: After use, turn off the HEATER switch first. Allow the fan to run for a few minutes to cool down the sealing bars before turning off the FAN switch and then the main POWER switch. This extends the lifespan of the heating elements.

6. Apkope

Regular maintenance ensures the longevity and optimal performance of your sealing machine.

• Tīrīšana: Regularly clean the conveyor belt and sealing area to remove any plastic residue or debris. Use a dry cloth; do not use abrasive cleaners or solvents. Ensure the machine is unplugged and cooled down before cleaning.
• Teflon Belt Replacement: The Teflon belts (0.008 in/0.2 mm thickness, 0.59 in/15 mm width) are consumable parts and will wear out over time. Replace them when they show signs of wear, tearing, or reduced sealing quality. Refer to the included accessories for spare belts.
• Toothed Belt Inspection: Periodically inspect the toothed belts for wear or damage. Replace if necessary.
• Drošinātāja nomaiņa: If the machine loses power unexpectedly, check the fuse. Replace with the included spare fuse (if applicable) or a fuse of the same rating.
• Eļļošana: Consult VEVOR support for any lubrication requirements.

Figure 4: Illustration of included consumables such as Teflon tape and an extra fuse, essential for maintenance.

7. Traucējummeklēšana

8. Specifikācijas

• Preces modeļa numurs: 900 MLP
• Jauda: 600W
• Sealing Width (Bag): 0.24–0.47 collas / 6–12 mm
• Bag Height: 4.72–9.65 collas / 120–245 mm
• Blīvēšanas ātrums: 0–52.49 pēdas/min (0–16 m/min)
• Single Film Thickness: 0.0008–0.03 collas / 0.02–0.8 mm
• Temperatūras diapazons: 32–572 ° F / 0–300 ° C
• Teflon Conveyor Belt Thickness: 0.008 collas / 0.2 mm
• Teflon Conveyor Belt Width: 0.59 collas / 15 mm
• Max Load of Conveyor Belt: 11.02 mārciņas/5 kg
• Konveijera lentes platums: 3.94 collas / 100 mm
• Materiāls: Oglekļa tērauds
• Produkta svars: 26.12 mārciņas/11.85 kg
• Produkta izmērs: 21.85 x 12.99 x 22.24 collas/555 x 330 x 565 mm
• Voltage: 110V

Figure 5: Dimensional drawing of the VEVOR Continuous Band Sealer, showing key measurements.

9. Garantija un atbalsts

VEVOR produkti ir izstrādāti izturībai un veiktspējai. Lai saņemtu informāciju par garantiju, tehnisko atbalstu vai iegādātos rezerves daļas, lūdzu, apmeklējiet oficiālo VEVOR vietni. website or contact VEVOR customer service. Please have your model number (900MLP) and purchase date available when contacting support.

Apmeklējiet VEVOR veikalu vietnē Amazon