BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Ievads

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Produkta īpašības

• Integrēts kustības sensors: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Regulējams turēšanas laiks: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Trīs darbības režīmi:
  • AUTO režīms: Light activates when motion is detected in dark conditions.
  • IESLĒGTS režīms: Light remains constantly on.
  • G režīms: Light activates when motion is detected in both daytime and nighttime conditions.
• Trīs krāsu temperatūras: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Īpaši plāns dizains: Zems profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Daudzpusīga uzstādīšana: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Iepakojuma saturs

Pirms instalēšanas sākšanas pārliecinieties, vai ir visas sastāvdaļas:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Lietošanas instrukcija (šis dokuments)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Drošības informācija

BRĪDINĀJUMS: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• Šī ierīce ir paredzēta 120 V maiņstrāvas barošanas avotam.
• Nemēģiniet modificēt armatūru.
• Turiet bērnus prom no uzstādīšanas vietas.

Iestatīšana un uzstādīšana

Veiciet šīs darbības, lai pareizi instalētu:

1. Sagatavojieties uzstādīšanai:
   • Pirms iedarbināšanas izslēdziet strāvas padevi pie ķēdes pārtraucēja.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Uzstādiet montāžas kronšteinu:
   • Pagrieziet un noņemiet plastmasas stiprinājuma kronšteinu no gaismas ķermeņa.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Vadu savienojumi:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Gaismas stiprinājuma uzstādīšana:
   • Uzmanīgi ievietojiet visus vadus sadales kārbā.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Atjaunot jaudu: Atkal ieslēdziet strāvu pie ķēdes pārtraucēja.

4. attēls: Vizuāla pamācība instalēšanas procesam.

Lietošanas instrukcijas

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Darba režīma izvēle:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTOMĀTIS: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekundes
   • 120S: 120 sekundes (2 minūtes)
   • 180S: 180 sekundes (3 minūtes)

Figure 5: Switches for adjusting hold time and operating modes.

Apkope

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Tīrīšana: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED kalpošanas laiks: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Pārbaude: Periodiski pārbaudiet armatūru, vai nav bojājumu vai vaļīgu savienojumu. Ja tiek konstatētas problēmas, atvienojiet strāvu un konsultējieties ar kvalificētu elektriķi.

Problēmu novēršana

Ja rodas problēmas ar apgaismes ķermeņiem, skatiet tālāk norādītās bieži sastopamās problēmas un risinājumus.

Specifikācijas

Garantija un atbalsts

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webvietne. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.