SONICAKE Warped Dimension Modulation Guitar Effects Pedal User Manual

1. Ievads

The SONICAKE Warped Dimension is a versatile modulation guitar effects pedal designed to offer a range of high-quality modulation effects. This pedal combines four classic modulation modes: Chorus, Flanger, Phaser, and Tremolo, providing diverse tonal options for any musical style. It features a dedicated Tap Tempo function for real-time rate control and a specially designed buffer bypass circuit to maintain signal integrity.

Figure 1: SONICAKE Warped Dimension Modulation Guitar Effects Pedal

2. Galvenās iezīmes

• 4-in-1 Modulation: Integrates Chorus, Flanger, Phaser, and Tremolo effects into a single pedal.
• Classic Tones: Reproduces legendary modulation effects.
• Pieskarieties Tempo: Independent footswitch for real-time rate control.
• Bufera apiešana: Maintains pristine sound quality when the effect is disengaged.
• Izturīga konstrukcija: Housed in an aluminum-alloy casing for lightweight durability.

3. Vadības ierīces un funkcijas

2. Attēls: beidziesview of Pedal Controls

1. Režīma izvēles poga: Rotates to select one of the four modulation effects: Chorus, Flanger, Phaser, or Tremolo.
2. DC 9V ieeja: Connects to a 9V DC center-negative power supply (not included).
3. Ievades džeks: 1/4-inch audio input for your guitar or other instrument.
4. Līmeņa poga: Regulē efekta kopējo izejas skaļumu.
5. Toņa poga: Controls the tone or brightness of the modulated signal.
6. Dziļuma poga: Adjusts the intensity or depth of the selected modulation effect.
7. Rate Knob: Controls the speed of the selected modulation effect. This knob is overridden by the Tap Tempo function when active.
8. Izejas ligzda: 1/4-inch audio output to your amplifier vai nākamais pedālis ķēdē.
9. ON/OFF Footswitch: Engages or disengages the effect. The LED indicates the effect status (on/off).
10. TAP kāju slēdzis: Used for Tap Tempo. Tap this footswitch two or more times to set the rate of the modulation effect. The LED will blink to indicate the set tempo.

4. Iestatīšana

To set up your SONICAKE Warped Dimension pedal, follow these steps:

1. Strāvas pieslēgums: Connect a standard 9V DC center-negative power supply (5.5x2.1mm connector) to the DC 9V input jack (2). Ensure the power supply meets the specified voltage un polaritātes prasības.
2. Instrumenta savienojums: Connect your guitar or other instrument to the Input Jack (3) using a standard 1/4-inch instrument cable.
3. Izvades savienojums: Pievienojiet izejas ligzdu (8) savam amplifier vai nākamo pedāli signāla ķēdē, izmantojot standarta 6,35 cm instrumentu kabeli.
4. Ieslēgšana: Once all connections are secure, apply power to the pedal. The ON/OFF LED (9) will illuminate when the pedal is active.

Figure 3: DC 9V Center Negative Power Connection

5. Darbības režīmi

The pedal offers four distinct modulation modes, selectable via the Mode Selector Knob (1):

• Koris: Produces a rich, shimmering effect by slightly detuning and delaying the original signal.
• Flangers: Creates a sweeping, jet-like sound by mixing a delayed, phase-shifted signal with the original.
• Fāzētājs: Generates a swirling, psychedelic effect by creating phase shifts in the signal.
• Tremolo: Modulates the volume of the signal, creating a pulsating effect.

Figure 4: Modulation Mode Selection

Pieskarieties Tempo funkcijai

The Tap Tempo function allows you to set the modulation rate in real-time:

1. Engage the desired modulation effect using the ON/OFF Footswitch (9).
2. Tap the TAP Footswitch (10) two or more times in rhythm with your desired tempo. The LED on the TAP footswitch will blink to indicate the set rate.
3. The Rate Knob (7) will be overridden by the Tap Tempo setting until the pedal is powered off or the rate is manually adjusted again.

Figure 5: Tap Tempo Footswitch

6. Apkope

To ensure the longevity and optimal performance of your pedal:

• Turiet pedāli tīru un bez putekļiem. Tīrīšanai izmantojiet mīkstu, sausu drānu.
• Nepakļaujiet pedāli ekstremālām temperatūrām, mitrumam vai tiešiem saules stariem.
• Nemēģiniet pats izjaukt vai remontēt pedāli, jo tas var anulēt garantiju.
• Always use the correct power supply (9V DC center-negative) to prevent damage.

7. Traucējummeklēšana

• Nav skaņas: Pārbaudiet visus kabeļu savienojumus (instrumentu, amplifier, power). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
• Vāja vai kropļota skaņa: Pārbaudiet instrumentu un amplifier volume levels. Ensure the Level knob on the pedal is not set too low or too high. Test with different cables.
• Efekts nav saistošs: Confirm the power supply is connected and providing power. Press the ON/OFF footswitch firmly.
• Modulation Rate Issues: If using Tap Tempo, ensure you have tapped the footswitch at least twice. If not using Tap Tempo, adjust the Rate knob (7).

8. Specifikācijas

• Modeļa numurs: QDS
• Preces svars: 12.7 unces (360 grami)
• Produkta izmēri: 4.88 x 3.54 x 2.16 collas
• Savienotāja veids: 5.5×2.1mm center negative power connector
• Aparatūras saskarne: 1/4 collu audio
• Signāla formāts: Analogs
• Barošanas avots: Elektrība ar vadu
• Voltage: 9 volts

9. Produktu video

Watch these official product videos for demonstrations and further information:

10. Garantija un atbalsts

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SONICAKE webSaglabājiet pirkuma apliecinājumu jebkādu garantijas prasību gadījumā.