Parkside PDOS 200 C2 dubultās slīpmašīnas lietošanas instrukcija

1. Produkts beidziesview

The Parkside PDOS 200 C2 Double Grinder is a versatile power tool designed for grinding, sharpening, deburring, and derusting various metal and steel workpieces. It features a quiet, maintenance-free induction motor and two grinding wheels for both coarse and fine applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

1.1. attēls: The Parkside PDOS 200 C2 Double Grinder. This image shows the complete unit from a slight angle, highlighting its two grinding wheels, protective covers, and the central motor housing with the power switch.

2. Drošības instrukcijas

Vienmēr ievērojiet tālāk norādītos drošības pasākumus, lai novērstu elektriskās strāvas triecienu, ugunsgrēku un nopietnus savainojumus.

• Izlasiet rokasgrāmatu: Before operating the grinder, read and understand all instructions and safety warnings.
• Individuālie aizsardzības līdzekļi (IAL): Always wear safety glasses or a face shield, hearing protection, and appropriate work gloves.
• Darba zona: Keep the work area clean, well-lit, and free from clutter. Ensure adequate ventilation.
• Elektriskā drošība: Ensure the power supply matches the grinder's specifications. Do not operate in damp vai mitros apstākļos.
• Droša sagatave: Always hold the workpiece firmly against the work rest.
• Maintain Guards: Never operate the grinder without the protective covers and spark guards properly installed and adjusted.
• Izvairieties no pārmērīgas darbības: Vienmēr uzturiet pareizu stāvokli un līdzsvaru.
• Atvienojiet, kad nelietojat: Disconnect the grinder from the power supply before making adjustments, changing accessories, or when not in use.
• Pirms lietošanas pārbaudiet: Pārbaudiet, vai nav bojātu detaļu, nobīdes vai jebkādu citu apstākļu, kas varētu ietekmēt darbību.

3. Iepakojuma saturs

Carefully unpack all items and check for completeness. If any parts are missing or damaged, contact customer support.

• Parkside PDOS 200 C2 Double Grinder unit
• 1x Coarse grinding wheel (Grit 36)
• 1x Fine grinding wheel (Grit 80)
• 2x Spark protection glasses
• 2x Work rests
• Mounting hardware (if applicable for bench mounting)
• Lietošanas pamācība

4. Iestatīšana

4.1 Montāža uz darbagalda

For stable and safe operation, the double grinder should be securely mounted to a workbench. Use appropriate bolts and nuts (not always included) to fasten the grinder through the mounting holes in its base.

4.2 Installing Spark Protection Glasses and Work Rests

1. Attach the spark protection glasses to the designated brackets above each grinding wheel. Ensure they are securely fastened and positioned to protect your eyes from sparks and debris.
2. Install the work rests in front of each grinding wheel. Adjust their position so that the gap between the work rest and the grinding wheel is no more than 2 mm. This gap should be maintained as the wheel wears down. The work rests are tool-free adjustable.

4.1. attēls: Priekšpuse view of the grinder, showing the spark protection glasses and adjustable work rests in position. The image also depicts sparks generated during grinding, illustrating the function of the protective elements.

4.3 Strāvas pieslēgums

Connect the power cable to a suitable electrical outlet. Ensure the power switch is in the "OFF" position before plugging in the unit.

5. Lietošanas instrukcijas

5.1 Ieslēgšana/izslēgšana

• To turn on the grinder, press the dust-protected ON (I) switch.
• To turn off the grinder, press the OFF (O) switch.
• Pirms darba uzsākšanas ļaujiet slīpripām sasniegt pilnu ātrumu.

5.2 Slīpēšanas metodes

The PDOS 200 C2 features two grinding wheels:

• Coarse Grinding Wheel (Grit 36): Use for rapid material removal, shaping, and initial sharpening of dull tools.
• Fine Grinding Wheel (Grit 80): Use for finishing, fine sharpening, and deburring.

When grinding:

1. Always wear appropriate PPE.
2. Hold the workpiece firmly against the work rest.
3. Apply light, even pressure. Excessive pressure can damage the wheel or motor.
4. Move the workpiece across the face of the wheel to ensure even wear.
5. Avoid grinding on the side of the wheel, as this can cause the wheel to break.
6. For sharpening, maintain a consistent angle against the wheel.
7. Allow the workpiece to cool periodically to prevent overheating and damage to the material.

6. Apkope

Regulāra apkope nodrošina jūsu dzirnaviņas ilgmūžību un drošu darbību.

• Tīrīšana: Disconnect from power. Use a brush or compressed air to remove dust and debris from the motor housing and around the wheels.
• Riteņu pārbaude: Regulāri pārbaudiet slīpripas, vai tām nav plaisu, šķembu vai pārmērīga nodiluma. Bojātas vai nolietotas ripas nekavējoties nomainiet.
• Work Rest Adjustment: Ensure the gap between the work rest and the grinding wheel remains at a maximum of 2 mm. Adjust as the wheel wears.
• Spark Guard Inspection: Check spark protection glasses for cracks or excessive scratching that may impair visibility. Replace if necessary.
• Motors: The induction motor is maintenance-free and does not require lubrication.

7. Traucējummeklēšana

8. Specifikācijas

9. Garantija un atbalsts

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer's customer service department.

Saglabājiet pirkuma čeku kā pirkuma apliecinājumu garantijas vajadzībām.