GoodWe 3648-EM hibrīda invertora lietotāja rokasgrāmata

Ievads

This manual provides essential information for the safe and efficient operation, installation, and maintenance of the GoodWe 3648-EM Hybrid Inverter. Please read this manual thoroughly before installation and operation, and keep it for future reference.

The GoodWe 3648-EM is a high-performance hybrid inverter designed for residential and light commercial solar energy systems, integrating solar power generation, battery storage, and grid connection capabilities.

Produkts beidziesview

The GoodWe 3648-EM Hybrid Inverter system includes the main inverter unit and a three-phase Smart Meter for comprehensive energy management.

Figure 1: GoodWe 3648-EM Hybrid Inverter (top) and accompanying Smart Meter (bottom left).

This image displays the primary components of the GoodWe 3648-EM system. The larger unit is the hybrid inverter, characterized by its white casing and black control panel with indicator lights. Below and to the left is the compact Smart Meter, designed for DIN rail mounting, also in a white casing with a small display and indicator lights.

2. attēls. Priekšpuse view of the GoodWe 3648-EM Hybrid Inverter.

This image shows a detailed front view of the GoodWe 3648-EM Hybrid Inverter. The front panel features a series of LED indicators and buttons for status monitoring and basic control. The GoodWe logo is visible on the right side of the control panel.

3. attēls: Tuvplāns view of the GoodWe Smart Meter.

This image provides a close-up of the GoodWe Smart Meter, a compact device with a small digital display and several indicator lights (power, communication, status). It is designed for integration into electrical panels to monitor energy flow.

Tehniskās specifikācijas

Drošības instrukcijas

Always adhere to local electrical codes and regulations. Installation and maintenance should only be performed by qualified personnel.

• Ensure the inverter is disconnected from all power sources (PV, battery, grid) before performing any work.
• Neatveriet invertoru casing unless explicitly instructed by GoodWe technical support.
• Avoid touching live electrical components.
• Nodrošiniet pareizu invertora zemējumu.
• Neļaujiet bērniem un nepiederošam personālam atrasties uzstādīšanas zonā.

Uzstādīšana un iestatīšana

1. Izpakošana un pārbaude

Carefully unpack the inverter and Smart Meter. Inspect all components for any signs of damage during transit. Report any damage to your supplier immediately.

2. Invertora uzstādīšana

Choose a suitable mounting location that is:

• Well-ventilated and protected from direct sunlight.
• Tālu no viegli uzliesmojošiem materiāliem.
• Pieejams apkopei.
• Capable of supporting the inverter's weight (17 kg).

Use the provided mounting bracket and hardware to securely fasten the inverter to a solid wall or frame.

3. Elektriskie savienojumi

All electrical connections must comply with local wiring regulations and standards. Refer to the connection diagram below for guidance.

4. attēls. Aizmugure view of the GoodWe 3648-EM Hybrid Inverter showing connection ports.

This image displays the rear panel of the GoodWe 3648-EM Hybrid Inverter, highlighting its various connection terminals. These include inputs for PV strings (PV1, PV2), battery connections, grid connection (ON-GRID), backup load connection (BACK-UP), and communication ports (RS485, Meter). A large heat sink is visible at the bottom.

1. PV savienojums: Connect the positive and negative cables from your solar array to the PV1 and PV2 inputs. Ensure correct polarity.
2. Akumulatora savienojums: Connect the battery bank to the dedicated battery terminals. Observe correct polarity (+/-).
3. Tīkla savienojums: Connect the inverter to the main electrical grid.
4. Backup Load Connection: For critical loads, connect them to the backup output.
5. Smart Meter Connection: Connect the three-phase Smart Meter as per the wiring diagram provided in the full installation guide.
6. Zemējums: Pārliecinieties, vai invertora korpuss ir pareizi iezemēts.

4. Communication Setup (Wi-Fi)

The inverter features integrated Wi-Fi for monitoring and configuration. Follow these general steps:

• Ieslēdziet invertoru.
• Connect your device (smartphone, laptop) to the inverter's Wi-Fi hotspot (SSID typically starts with "GoodWe_").
• Access the inverter's web interface via a browser (default IP address usually 192.168.1.1).
• Configure network settings to connect the inverter to your home Wi-Fi network.
• Register the inverter on the GoodWe monitoring platform (e.g., SEMS Portal) for remote monitoring.

Invertora darbība

1. Sākotnējā ieslēgšana

After all connections are secure and verified:

1. Turn on the DC isolator switch for the PV array.
2. Ieslēdziet akumulatora slēdzi.
3. Turn on the AC breaker from the grid.
4. The inverter will perform a self-test and then begin operation. Observe the LED indicators on the front panel for status.

2. Uzraudzība

Monitor the inverter's performance via the integrated web server or the GoodWe monitoring app/platform. Key parameters to observe include:

• PV enerģijas ražošana
• Battery charge/discharge status
• Grid interaction (export/import)
• Slodzes patēriņš
• Sistēmas statuss un kļūdu kodi

3. Izslēgšanas procedūra

To safely shut down the inverter:

1. Turn off the AC breaker from the grid.
2. Izslēdziet akumulatora slēdzi.
3. Turn off the DC isolator switch for the PV array.
4. Wait for all indicators on the inverter to turn off.

Apkope

Regulāra apkope nodrošina jūsu invertora optimālu veiktspēju un ilgmūžību.

• Ikmēneša: Visually inspect the inverter and wiring for any signs of damage, corrosion, or loose connections. Ensure ventilation openings are clear of dust and debris.
• Ik gadu: Have a qualified technician perform a thorough inspection, including checking electrical connections, torque settings, and system performance. Clean the inverter's heat sink if necessary.
• Keep the area around the inverter clean and free from obstructions.

Problēmu novēršana

This section provides basic troubleshooting steps for common issues. For complex problems, contact GoodWe technical support or a certified installer.

Garantija un atbalsts

GoodWe products typically come with a standard warranty. Please refer to your purchase documentation or the official GoodWe webvietni, lai iepazītos ar konkrētiem garantijas noteikumiem un nosacījumiem, kas piemērojami jūsu reģionam un modelim.

For technical support, warranty claims, or further assistance, please contact your installer or the official GoodWe support channels:

• GoodWe Oficiālais Webvietne: www.goodwe.com
• SEMS Portal (Monitoring): www.semsportal.com
• Refer to the contact information provided with your product or on the GoodWe webreģionālo atbalsta numuru vietne.