Byron Wireless Plug-in Doorbell Set

Ievads

This manual provides instructions for the installation, operation, and maintenance of your Byron Wireless Plug-in Doorbell Set, Model DBY-22352BS. This set includes a wireless push button and a plug-in door chime, designed for convenient notification of visitors.

Iepakojuma saturs

Lūdzu, pārliecinieties, ka jūsu iepakojumā ir visi tālāk norādītie priekšmeti:

• 1x Wireless Bell Push Button
• 1x Wireless Plug-in Door Chime
• 1x CR2032 Battery (for push button)
• Double-sided Tape (for mounting)
• Lietošanas instrukcija (šis dokuments)

Image: The Byron Wireless Plug-in Doorbell Set, showing the main chime unit on the left and the push button on the right. Both units are black with the "Byron" logo.

Funkcijas

• Bezvadu darbība: Eliminates the need for complex wiring.
• Plug-in Chime: Receiver plugs directly into a standard power outlet.
• Paplašināts diapazons: Up to 150 meters (unobstructed) wireless operating range.
• Melodijas izvēle: 16 selectable melodies.
• Regulējams skaļums: 5 volume levels for customized sound output.
• Izturība pret laikapstākļiem: IP44 protection rating for the push button, suitable for outdoor use.
• Viegla uzstādīšana: Includes all necessary mounting hardware.

Iestatīšana

1. Install Push Button Battery: Atveriet spiedpogu casing (refer to diagrams if available in physical manual) and insert the supplied CR2032 battery, ensuring correct polarity. Close the casing droši.
2. Mount Push Button:
   • Choose a suitable location near your door, avoiding direct metal surfaces which can interfere with the wireless signal.
   • Rūpīgi notīriet montāžas virsmu.
   • Use the provided double-sided tape to adhere the push button to the desired location.
3. Plug in Door Chime: Insert the wireless plug-in door chime into a standard electrical outlet indoors. Ensure it is within the 150-meter unobstructed range of the push button.
4. Pārošana (ja nepieciešams): The units are typically pre-paired from the factory. If the chime does not ring when the push button is pressed, refer to the "Troubleshooting" section or the full manual for specific pairing instructions.

Lietošanas instrukcijas

1. Ringing the Doorbell: Press the push button once. The plug-in chime will sound the selected melody.
2. Mainīgas melodijas: Locate the melody selection button on the plug-in chime (refer to product diagrams if available). Press this button repeatedly to cycle through the 16 available melodies. The chime will play a preview katras melodijas, kad to atlasāt.
3. Skaļuma regulēšana: Locate the volume control button on the plug-in chime. Press this button to cycle through the 5 available volume levels (low to high).

Apkope

• Tīrīšana: Noslaukiet durvju zvanus ar mīkstu, sausu drānu. Nelietojiet abrazīvus tīrīšanas līdzekļus vai šķīdinātājus.
• Battery Replacement (Push Button): When the push button's signal weakens or stops working, replace the CR2032 battery. Open the casing, remove the old battery, and insert a new one with the correct polarity. Dispose of old batteries responsibly.
• Vides apstākļi: While the push button is IP44 rated, extreme weather conditions may affect performance. Ensure the chime unit is used indoors in a dry environment.

Problēmu novēršana

Specifikācijas

• Modelis: DBY-22352BS
• Zīmols: Bairons
• Bezvadu diapazons: Līdz 150 metriem (bez šķēršļiem)
• Melodijas: 16 izvēles
• Skaļuma līmeņi: 5 regulējams
• Spiedpogu akumulators: 1x CR2032 (iekļauts)
• Chime Power: AC spraudnis
• Protection Rating (Push Button): IP44 (dustproof and splash-resistant)
• Produkta izmēri: 10.04 x 7 x 5.93 cm; 610 g

Garantija un atbalsts

For warranty information, technical support, or to purchase replacement parts, please refer to the official Byron webvietnē vai sazinieties ar klientu apkalpošanas nodaļu. Saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.

Ražotājs: Bairons

Webvietne: www.byron.com (Piemamp(saite, faktiskā saite var atšķirties)