Mebus Electronic Alarm Clock Model 785871 User Manual

Ievads

This manual provides detailed instructions for the setup, operation, and maintenance of your Mebus Electronic Alarm Clock, Model 785871. Please read this manual thoroughly before using the device to ensure proper function and longevity.

The Mebus Electronic Alarm Clock is a digital, radio-controlled device designed to provide accurate time, date, and temperature readings, along with reliable alarm functions. Its modern design and clear display make it suitable for various room types, especially bedrooms.

Iepakojuma saturs

• Mebus Electronic Alarm Clock (Model 785871)
• Lietotāja rokasgrāmata (šis dokuments)

Piezīme: Baterijas nav iekļautas komplektā un tās jāiegādājas atsevišķi.

Iestatīšana

1. Akumulatora uzstādīšana

1. Atrodiet bateriju nodalījuma vāciņu modinātāja aizmugurē.
2. Lai atvērtu nodalījumu, pabīdiet vai atskrūvējiet vāku.
3. Insert the required batteries (e.g., 2 x AAA) according to the polarity indicators (+ and -) inside the compartment.
4. Droši uzlieciet akumulatora nodalījuma vāku.

Important: Ensure correct battery polarity to prevent damage to the device.

2. Initial Power On and Radio Controlled Time Synchronization

Upon battery installation, the clock will power on and automatically begin searching for the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength.

• Place the clock near a window or in an open area for optimal signal reception.
• A signal icon (often a radio tower or wave symbol) on the display will flash during synchronization and become solid once the time is successfully set.
• If synchronization fails, the clock will typically default to a standard time (e.g., 12:00 AM) and you may need to set the time manually (see "Setting Time Manually" in the Operating section).

1. attēls. Priekšpuse view of the Mebus Electronic Alarm Clock, showing the digital display with time, date, day, and temperature, along with control buttons.

Lietošanas instrukcijas

1. Pogas aizdareview

The clock features several buttons for control. The main buttons are typically:

• SET pogas: Used to enter setting modes for time, alarm, etc. There are two 'SET' buttons, likely for different functions or for confirming settings.
• MODE poga: Cycles through display modes or setting options.
• ▲ / ▼ buttons: Adjust values (increase/decrease) during setting modes.

2. attēls: Leņķis view of the Mebus Electronic Alarm Clock, highlighting the arrangement of the control buttons below the digital display.

2. Setting Time Manually (if radio control is unavailable)

1. Press and hold the appropriate IESTATĪT button (refer to specific button labels on your device, often labeled "TIME SET" or similar) until the time display flashes.
2. Izmantojiet ▲ un ▼ pogas, lai pielāgotu stundas.
3. Nospiediet pogu IESTATĪT vēlreiz, lai pārietu uz minūtēm, pēc tam izmantojiet ▲ un ▼ lai pielāgotu.
4. Turpiniet nospiest IESTATĪT to cycle through other settings like year, month, and day, adjusting each with ▲ un ▼.
5. Nospiediet pogu IESTATĪT button one last time or wait a few seconds for the clock to exit setting mode.

3. Trauksmes iestatīšana

1. Nospiediet un turiet IESTATĪT button associated with the alarm function (often indicated by an alarm icon or "ALARM SET"). The alarm time will flash.
2. Izmantojiet ▲ un ▼ pogas, lai iestatītu vēlamo modinātāja stundu.
3. Nospiediet modinātāju IESTATĪT vēlreiz, lai pārietu uz minūtēm, pēc tam izmantojiet ▲ un ▼ lai pielāgotu.
4. Nospiediet modinātāju IESTATĪT button one last time or wait for the clock to exit setting mode.
5. To activate/deactivate the alarm, there is usually a dedicated switch or button (often on the side or back, or a quick press of an alarm SET button). Look for an alarm icon on the display to confirm activation.

4. Atlikšanas funkcija

When the alarm sounds, press the large button on the top of the clock (if present, or a designated snooze button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button or flip the alarm switch off.

5. Display Modes and Temperature Unit Selection

• Displeja režīmi: Nospiediet pogu REŽĪMS button to cycle through different display information, such as time, date, and potentially other features.
• Temperatūras mērvienība: To switch between Celsius (°C) and Fahrenheit (°F) for the temperature display, locate a small button or switch, often on the back or side of the unit, or it might be an option within the REŽĪMS iestatījumus.

Apkope

1. Tīrīšana

• Noslaukiet pulksteņa ārpusi ar mīkstu, sausu drānu.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.
• Izvairieties no mitruma iekļūšanas jebkurās atverēs.

2. Akumulatora nomaiņa

• Kad displejs kļūst blāvs vai funkcijas kļūst neregulāras, ir pienācis laiks nomainīt baterijas.
• Follow the "Battery Installation" steps in the Setup section.
• Atbrīvojieties no vecām baterijām atbildīgi saskaņā ar vietējiem noteikumiem.

Problēmu novēršana

Specifikācijas

• Zīmols: Mebus
• Modeļa numurs: 785871 (also known as Mebus 25800)
• Displeja veids: Digitālais
• Stils: Mūsdienīgs
• Īpaša iezīme: Signalizācija
• Barošanas avots: Darbojas ar baterijām (baterijas nav iekļautas)
• Numura veids: Guļamistaba
• Forma: Square-ish
• Materiāls: Plastmasa
• Izmēri: 5.12 x 2.95 x 2.13 collas (iepakojuma izmēri)
• Preces svars: 4.9 unces

Atbalsts

For further assistance or inquiries not covered in this manual, please refer to the Mebus official website or contact their customer support. Keep your product model number (785871) handy when seeking support.

Note: Specific contact details are not provided in this document.