KOORUI KR20Y Single Monitor Desk Mount User Manual

Ievads

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

Drošības informācija

Lai novērstu traumas vai bojājumus, lūdzu, ievērojiet šādus drošības pasākumus:

• Nepārsniedziet maksimālo kravnesību 9 kg (19.8 mārciņas).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• Uzstādīšanas laikā turiet prom bērnus un mājdzīvniekus.
• Check all connections and fasteners regularly to ensure they remain secure.
• Avoid pinching cables during adjustment to prevent damage.

Iepakojuma saturs

Pirms instalēšanas sākšanas, lūdzu, pārliecinieties, vai ir visas sastāvdaļas:

• Monitora sviras montāža
• C-Clamp Montāžas aparatūra
• Grommet montāžas aparatūra
• VESA plāksne
• Monitor Mounting Screws (various sizes)
• Sešstūra atslēgas / regulēšanas instrumenti
• Kabeļu pārvaldības klipi
• Lietotāja rokasgrāmata (šis dokuments)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

Specifikācijas

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

Uzstādīšana un uzstādīšana

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp Mount and Grommet Mount.

1. C-Clamp Mount

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. Pievienojiet C-clamp pamatni līdz galda malai.
2. Pievelciet klamp Pieskrūvējiet skrūvi, līdz pamatne ir droši piestiprināta pie galda. Pārliecinieties, vai tā ir stabila un nešūpojas.
3. Insert the main pole of the monitor arm into the C-clamp bāze.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Izjauciet C-clamp sastāvdaļas no pamatnes, ja tās ir iepriekš piestiprinātas.
2. Insert the grommet bolt through the pre-drilled hole in your desk.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Insert the main pole of the monitor arm into the grommet base.
5. Secure the pole with the provided screw or knob.

3. Monitora pievienošana

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. Kabeļu vadība

Lai uzturētu sakārtotu darba vietu, izvelciet monitora kabeļus caur integrētajiem kabeļu pārvaldības kanāliem uz sviras.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

Lietošanas instrukcijas

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewpieredzi.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. Augstuma regulēšana

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see Apkope sadaļa).

2. Slīpuma pielāgošana

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewslīpuma leņķis. Slīpuma diapazons ir no +85° līdz -30°.

3. Grozāmā regulēšana

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

Attēls: Rentgena uzņēmums view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

Apkope

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• Tīrīšana: Noslaukiet monitora sviru ar mīkstu, sausu drānuamp Izvairieties no abrazīviem tīrīšanas līdzekļiem vai šķīdinātājiem.
• Periodiskā pārbaude: Regularly check all screws and connections to ensure they are tight and secure.

Problēmu novēršana

Garantija un atbalsts

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.