Sena 10S motocikla Bluetooth austiņu sakaru sistēmas lietotāja rokasgrāmata

1. Produkts beidziesview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Galvenās funkcijas:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

1.1. attēls. Priekšpuse view of the Sena 10S Motorcycle Bluetooth Headset.

2. Iepakojuma saturs

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Skaļruņu komplekts
• Uzkares mikrofons
• Vadu mikrofons
• Montāža Clamp Komplekts
• USB barošanas un datu kabelis
• Audio kabelis
• Velcro spilventiņi skaļruņiem
• Mikrofona sūkļi

Figure 2.1: All components included in the Sena 10S package.

3. Iestatīšana un instalēšana

3.1. Ierīces uzlāde

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

3.1. attēls: sāni view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Atskrūvējiet skrūves cl aizmugurēamp vienība.
2. Pabīdiet clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Pievelciet skrūves, lai nostiprinātu kloķiamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Lietošanas instrukcijas

4.1 Ieslēgšana/izslēgšana

• Ieslēgšana: Press and hold the Phone Button and the Jog Dial for 1 second.
• Izslēgt: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Skaļuma kontrole

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Domofona saziņa

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Atskaņot/pauzēt mūziku: Nospiediet un turiet Jog Dial 1 sekundi.
• Atbildēt/beigt zvanu: Pieskarieties pogai Tālrunis.
• Balss iezvane: Nospiediet un turiet tālruņa pogu 3 sekundes.

5. Apkope un kopšana

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Turiet ierīci sausu. Mitrums var sabojāt iekšējās shēmas.
• Ierīces tīrīšanai neizmantojiet spēcīgas ķīmiskas vielas, tīrīšanas šķīdinātājus vai spēcīgus mazgāšanas līdzekļus.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Glabājiet ierīci vēsā, sausā vietā, kad tā netiek lietota.
• Lai uzturētu akumulatora darbspēju, regulāri uzlādējiet akumulatoru, pat ja tas netiek lietots.

6. Traucējummeklēšana

If you encounter issues with your Sena 10S, try the following steps:

• Nav jaudas: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Nav skaņas/zems skaļums: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Domofons neizveido savienojumu: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Bluetooth atvienošana: Ensure your paired device is within range. Try re-pairing the device.
• Ierīces atiestatīšana: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Tehniskās specifikācijas

8. Oficiālais produkta video

9. Garantija un atbalsts

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.