LaserPecker LP4 rotējošā pagarinājuma komplekta lietošanas instrukcija

1. Ievads

This manual provides essential instructions for the safe and effective use of the LaserPecker LP4 Rotary Extension Set. This accessory is designed to expand the engraving capabilities of your LaserPecker LP4 laser engraver, allowing for precise engraving on a wide range of cylindrical, conical, spherical, and annular objects.

Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance.

2. Drošības informācija

WARNING: Laser products can cause serious injury if not used properly. Always follow safety guidelines.

• The LaserPecker LP4 is a Class I laser product with a power output of 0.5mW.
• Always wear appropriate laser safety goggles when operating the LaserPecker LP4 and its accessories.
• Nodrošiniet, lai darba zona būtu labi vēdināta.
• Nekad neatstājiet mašīnu bez uzraudzības darbības laikā.
• Turiet bērnus un mājdzīvniekus tālāk no darbības zonas.
• Do not engrave flammable or explosive materials.
• Refer to the main LaserPecker LP4 manual for comprehensive safety instructions regarding the laser unit itself.

3. Iepakojuma saturs

Pārliecinieties, vai iepakojumā ir visas sastāvdaļas:

• Rotary Extension Base Unit
• Ring Clip Jaw Attachment
• Double-step Jaw Attachment
• Single-step Jaw Attachment
• Savienojuma kabelis
• Lietotāja rokasgrāmata (šis dokuments)

1. attēls: LaserPecker LP4 Laser Engraver with the Rotary Extension Set attached, ready for engraving a conical object.

4. Iestatīšana

1. Izpakošana: Uzmanīgi izņemiet visas sastāvdaļas no iepakojuma.
2. Izvietojums: Place the Rotary Extension Base Unit on a stable, level surface.
3. Connecting to LP4: Connect the Rotary Extension to your LaserPecker LP4 unit using the provided connection cable. Refer to your LP4 main manual for specific port locations.
4. Attaching Jaw Attachments: Select the appropriate jaw attachment (Ring Clip, Double-step, or Single-step) based on the object you intend to engrave. Securely attach it to the rotary unit.
   

   2. attēls: The three available jaw attachments and their respective diameter ranges: Ring Clip (13-78 mm), Double-step (0-128 mm), and Single-step (66-145 mm).

5. Securing the Object: Place the object to be engraved firmly into the chosen jaw attachment. Ensure it is centered and stable to prevent movement during engraving. The Rotary Extension supports objects with diameters from 3mm to 200mm.
6. Leņķa regulēšana: For conical or irregularly shaped objects, adjust the angle of the rotary unit to match the object's surface. The unit allows for 180° precise angle adjustment.
   

   3. attēls: Illustrates the 180° precise angle adjustment feature, allowing the rotary unit to tilt for conical objects.

5. Lietošanas instrukcijas

The Rotary Extension works in conjunction with your LaserPecker LP4 engraver. Ensure your LP4 is powered on and connected to the Rotary Extension.

1. Programmatūras iestatīšana: Open the LaserPecker application on your control device (smartphone/tablet/computer). Select the rotary engraving mode.
2. Dizaina sagatavošana: Import or create your design. Adjust the design to fit the dimensions and curvature of your object.
3. Materiāla izvēle: Choose the appropriate material settings within the software. The LP4 supports engraving on over 300 materials using its dual-laser system (diode and pulsed infrared lasers).
4. Iepriekšview and Positioning: Use the one-click preview function on the LP4's LED touch screen or within the software to project the engraving path onto your object. Adjust the object's position or the design as needed for accurate placement.
5. Sāciet gravēšanu: Kad esat apmierināts ar iepriekšējoview, initiate the engraving process. Monitor the progress via the LP4's screen or the application.
6. Engraving Various Objects: The Rotary Extension is versatile for items such as tumblers, rings, wine glasses, and more.
   

   4. attēls: Examples of the Rotary Extension's multifunctionality, showing engraving on a tumbler, baseball, glass, and ring.
   

   5. attēls: A selection of common items suitable for engraving with the Rotary Extension, such as mugs, tumblers, rings, baseballs, and flowerpots.

   

   6. attēls: Demonstrates advanced application scenarios, including horizontal engraving for conical objects and interior engraving for rings.

7. Pabeigšana: Once engraving is complete, the machine will stop. Carefully remove the engraved object.

6. Apkope

• Tīrīšana: Regularly clean the Rotary Extension unit, especially the jaw attachments, to remove dust and debris from engraving. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Pārbaude: Periodically inspect the connection cable for any signs of wear or damage.
• Uzglabāšana: When not in use, store the Rotary Extension in a clean, dry environment, away from direct sunlight and extreme temperatures.

7. Traucējummeklēšana

For further troubleshooting or technical assistance, please refer to the official LaserPecker support resources or contact their customer service.

8. Specifikācijas

• Compatible Engraver: LaserPecker LP4
• Engravable Object Diameter: 3 mm - 200 mm
• Supported Object Shapes: Conical, Spherical, Cylindrical, Annular, Irregular Cylinders
• Jaw Attachments: Ring Clip (13-78 mm), Double-step (0-128 mm), Single-step (66-145 mm)
• Leņķa regulēšana: 180° Precise Angle Adjustment
• Izmēri (aptuveni):
  

  7. attēls: Detailed dimensions of the Rotary Extension unit.

9. Garantija un atbalsts

For warranty information, product registration, and technical support, please visit the official LaserPecker webvietnē vai sazinieties tieši ar klientu apkalpošanas dienestu. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.

Oficiālā Webvietne: www.laserpecker.net (Piemamp(saite, faktiskā saite var atšķirties)