Ievads
The Schiit Midgard is a versatile headphone amppacēlājs un priekšamp designed to deliver high-fidelity audio. It features a Halo topology mixed-mode feedback system, providing robust power output for a wide range of headphones. This manual provides essential information for setting up, operating, and maintaining your Midgard unit.
Figure 1: Schiit Midgard Headphone Amplifier un Preamp. This image displays the overall design of the unit, showcasing its matte black finish and compact form factor.
Iestatīšana
1. Izpakošana un saturs
Carefully remove the Midgard unit from its packaging. Ensure all components are present:
- Schiit Midgard Headphone Amplifier un Preamp
- Strāvas kabelis
- Lietotāja rokasgrāmata (šis dokuments)
2. Priekšējais panelis ir beidziesview
Figure 2: Front Panel. This image highlights the front panel of the Midgard, showing the volume knob, gain switches, and headphone output jacks.
- Pastiprinājuma slēdži: Two switches for adjusting the gain level.
- Skaļuma regulators: Controls the output volume for headphones and preamp izejas.
- 1/4" TRS Headphone Output: Standarta austiņu ligzda.
- 4-pin XLR Headphone Output: Balanced headphone jack for compatible headphones.
3. Aizmugurējā paneļa savienojumi
Figure 3: Rear Panel Connections. This image illustrates the rear panel of the Midgard, detailing the various input and output ports, including balanced XLR and single-ended RCA connections, and the power input.
- Balanced Inputs (XLR): Connect audio sources with balanced XLR outputs.
- Single-Ended Inputs (RCA): Connect audio sources with single-ended RCA outputs.
- Līdzsvarots Preamp Outputs (XLR): Pievienojiet strāvas padevei amplifiers or active speakers with balanced XLR inputs.
- Single-Ended Preamp Outputs (RCA): Pievienojiet strāvas padevei amplifiers or active speakers with single-ended RCA inputs.
- Maiņstrāvas ieeja: Connect the provided power cable. The unit operates on 115VAC only and is designed for use in the United States, Canada, and Mexico.
4. Connecting Your System
- Ensure the Midgard unit is powered off and unplugged.
- Connect your audio source (e.g., DAC, streamer) to the desired input on the rear panel (Balanced XLR or Single-Ended RCA).
- If using headphones, connect them to either the 1/4" TRS or 4-pin XLR output on the front panel.
- Ja izmanto iepriekšamp function, connect the Balanced XLR or Single-Ended RCA preamp outputs to your power amppacēlājs vai aktīvie skaļruņi.
- Connect the power cable to the AC Power Input on the rear panel, then plug it into a 115VAC wall outlet.
Lietošanas instrukcijas
1. Ieslēgšana/izslēgšana
To power on the Midgard, ensure all connections are secure, then flip the power switch located on the rear panel. To power off, flip the switch back to the off position.
2. Skaļuma regulēšana
Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume. Start with the volume at its lowest setting before playing audio to prevent sudden loud sounds.
3. Selecting Gain Level
The Midgard features two gain levels. Use the gain switches on the front panel to select the appropriate gain for your headphones. Lower gain is suitable for sensitive headphones, while higher gain provides more power for less sensitive or high-impedance headphones.
4. Using as a Headphone Ampdzīvāks
Connect your headphones to either the 1/4" TRS or 4-pin XLR output. The Midgard delivers nearly 5W into 32 ohms, providing ample power for most headphones. Ensure your headphones are compatible with the selected output type.
5. Using as a Preamp
The Midgard can also function as a preamp. Connect its balanced or single-ended preamp izvada jaudai amplifier or active speakers. The volume knob controls the output level for both headphones and preamp outputs simultaneously.
Apkope
To ensure the longevity and optimal performance of your Schiit Midgard, follow these maintenance guidelines:
- Tīrīšana: Use a soft, dry cloth to clean the exterior of the unit. Avoid using liquid cleaners or solvents, as they may damage the finish or internal components.
- Ventilācija: Ensure the unit has adequate ventilation. Do not block the ventilation holes on the top or sides of the chassis.
- Vide: Operate the Midgard in a clean, dry environment, away from direct sunlight, excessive heat, moisture, or dust.
- Jauda: Always unplug the unit from the power outlet before cleaning or if it will be unused for an extended period.
Problēmu novēršana
If you encounter issues with your Schiit Midgard, refer to the following common troubleshooting steps:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| No sound from headphones/preamp izejas. |
|
|
| Izkropļota vai slikta skaņas kvalitāte. |
|
|
| Iekārta neieslēdzas. |
|
|
If the problem persists after trying these steps, please contact Schiit Audio customer support for further assistance.
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Modeļa nosaukums | Midgard |
| Izmēri (G x P x A) | 9 x 6 x 1.5 collas |
| Preces svars | 3 mārciņas |
| Power Output (into 32 ohms) | Nearly 5W (4.8W specified) |
| Frekvences reakcija | 20Hz-20Khz, +/-0.01dB |
| Impedance | 2 omi |
| Austiņas Džeks | 6.35 mm Jack (1/4" TRS), 4-pin XLR |
| Ievadierīces interfeiss | Balanced XLR, Single-Ended RCA |
| Output Device Interface | Līdzsvarots XLR Preamp, Single-Ended RCA Preamp |
| Jaudas saderība | 115VAC only (USA, Canada, Mexico) |
| Materiāls | Metāls |
| Īpašas funkcijas | Halo Topology, Dual Gain Levels, Made in Texas, USA |
Garantija un atbalsts
The Schiit Midgard Headphone Amplifier un Preamp comes with a standard manufacturer's warranty. For specific warranty terms, duration, and to register your product, please refer to the official Schiit Audio webvietnē vai sazinieties tieši ar viņu klientu atbalsta dienestu.
For technical support, service, or any questions not covered in this manual, please visit the Schiit Audio Store on Amazon or the official Schiit Audio webvietne.
