First Alert SMICO100-AC Interconnect Hardwire Combination Smoke & Carbon Monoxide Alarm

Ievads

The First Alert SMICO100-AC is an Interconnect Hardwire 2-in-1 Smoke & Carbon Monoxide Alarm with Battery Backup. It incorporates Precision Detection technology, designed to reduce nuisance alarms from cooking while providing early warning for fire and carbon monoxide hazards. This alarm is designed for easy installation and interconnection with compatible alarms, creating a comprehensive safety system throughout your home.

Image: First Alert - Most Trusted Brand in Fire Safety.

Drošības informācija

BRĪDINĀJUMS! Carbon monoxide cannot be seen or smelled but can kill you. If the alarm sounds, follow these steps:

1. Nospiediet pogu Test/Silence.
2. Zvaniet neatliekamās palīdzības dienestam (ugunsdzēsības dienestam vai 911).
3. Immediately move to fresh air - outdoors or by an open door/window.

SVARĪGI! This smoke alarm contains a maximum of 1.0 microcuries (37kBq) of Americium 241, a radioactive material. Distributed under U.S. NRC License No. 13-23889-01E and is made in compliance with U.S. NRC safety criteria in 10CFR32.27. The purchaser is exempt from any regulatory requirements.

Ieteicamais izvietojums

Install alarms on every level of your home and in every bedroom to ensure optimal protection. Proper placement is crucial for early detection of smoke and carbon monoxide.

Image: Recommended placement diagram for smoke and CO alarms.

Image: Install alarms on every level and in every bedroom.

Uzstādīšana un uzstādīšana

The SMICO100-AC alarm is designed for hardwired installation and includes a 9V battery backup. It features a Quick Connect Plug for simplified wiring.

Pirms uzstādīšanas:

• Ensure power is OFF at the circuit breaker for the circuit you will be working on.
• Familiarize yourself with local electrical codes and installation requirements.

Uzstādīšanas soļi:

1. Remove Old Alarm: Disconnect the old alarm from its wiring harness and mounting bracket.
2. Wire New Harness: If your existing wiring harness is not compatible, use the new Quick Connect Plug provided. Connect the black wire to the hot wire, white to neutral, and orange to the interconnect wire (if applicable). Ensure all connections are secure with wire nuts.
3. Montāžas kronšteins: Attach the new mounting bracket to the electrical box on the ceiling or wall. The bracket is designed to accommodate various screw arrangements.
4. Pievienot trauksmi: Plug the wiring harness into the back of the SMICO100-AC alarm.
5. Uzstādiet akumulatoru: The alarm comes with a pre-installed 9V Duracell battery. Remove the plastic tab to activate it.
6. Secure Alarm: Novietojiet trauksmes ierīci ar montāžas kronšteinu un pagrieziet pulksteņrādītāja virzienā, līdz tā droši nofiksējas vietā.
7. Atjaunot jaudu: IESLĒDZIET strāvu pie ķēdes pārtraucēja.
8. Testa trauksme: Press and hold the Test/Silence button until the alarm sounds. Refer to the 'Operating Instructions' section for expected alarm patterns.

Attēls: Atpakaļ view of the alarm with wiring harness.

Image: Quick Connect Plug for easy installation.

Lietošanas instrukcijas

The SMICO100-AC alarm provides distinct audible signals for smoke and carbon monoxide detection, as well as for low battery, malfunction, and end-of-life conditions.

Testa/klusuma poga:

Press and hold the Test/Silence button to test the alarm's functionality. The alarm will sound if working correctly. This button can also be used to temporarily silence nuisance alarms.

Image: Hand pressing the Test/Silence button.

Alarm Guide:

• 3 pīkstieni: Dūmu signalizācija
• 4 pīkstieni: Oglekļa monoksīda (CO) trauksme
• 1 "Chirp" every Minute: Low Battery - Replace Battery
• 3 "Chirps" every Minute: Malfunction - Replace Alarm
• 5 "Chirps" every Minute: End of Life - Replace Alarm

Apkope

Regular maintenance ensures the continued reliability of your alarm. Gently vacuum or use clean compressed air to remove accumulated dust monthly. Never use water, cleaners, or solvents, as these may damage the unit. Press the test button after installation, weekly, and after cleaning to check all alarm functions.

Nomaiņas grafiks:

Replace the alarm at least every 10 years after installation to ensure optimal performance and safety.

Image: Test alarms regularly.

Image: Replace alarms at least every 10 years.

Problēmu novēršana

If your alarm is chirping or sounding unexpectedly, refer to the Alarm Guide in the 'Operating Instructions' section to identify the specific issue. Common issues and their resolutions include:

• Nuisance Alarms (Cooking Smoke): The SMICO100-AC features Precision Detection technology to minimize nuisance alarms. If an alarm sounds due to cooking, use the Test/Silence button to temporarily silence it. Ensure proper ventilation in cooking areas.
• Zems akumulatora uzlādes līmenis: A single chirp every minute indicates a low battery. Replace the 9V battery immediately.
• Nepareiza darbība: Three chirps every minute indicate a malfunction. The alarm unit needs to be replaced.
• Dzīves beigas: Five chirps every minute indicate the alarm has reached its end of life and needs to be replaced.

Specifikācijas

Garantija un atbalsts

For detailed warranty information and user manuals, please refer to the official First Alert webvietni vai sazinieties ar klientu atbalsta dienestu.

• Klientu apkalpošanas komanda: 1-800-323-9005
• Webvietne: firstalert.com