Ievads
Thank you for choosing the RESTMO Sprinkler Timer with Brass Inlet. This programmable water timer is designed to simplify your garden watering tasks, providing automatic control for garden hoses, outdoor faucets, drip irrigation systems, and lawn watering. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.
Attēls: priekšpuse view of the RESTMO Sprinkler Timer, showing the digital display and control dial.
Drošības informācija
- Do not immerse the timer in water. It is IP54 waterproof, meaning it is protected against dust and splashing water, but not full immersion.
- Use only 2 x AAA 1.5V alkaline batteries (not included). Do not mix old and new batteries or different types of batteries.
- Remove batteries if the timer will not be used for an extended period to prevent leakage.
- Protect the timer from freezing temperatures. Disconnect and store indoors during winter.
- Ensure all connections are tight to prevent leaks. Teflon tape is recommended for a secure seal.
Produkts beidziesview
The RESTMO Sprinkler Timer features a user-friendly design with a large LCD screen and intuitive controls.
Image: Diagram illustrating the various components of the sprinkler timer, including the brass inlet, LCD screen, control dial, and buttons.
Galvenās sastāvdaļas:
- Pure Brass Inlet Thread: 360-degree rotatable for easy installation, with a built-in metal filter washer to prevent debris.
- Liels LCD ekrāns: Displays current time, next watering time, and battery status.
- Taimera numurs: Used to select different settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
- Labi/Manuāla poga: Confirms settings and activates manual watering.
- +/- pogas: Adjust values and activate rain delay.
- Waterproof Battery Compartment: Darbojas ar 2 x AAA baterijām.
Attēls: Tuvplāns view of the 360-degree swivel pure brass inlet, highlighting its design and durability.
Uzstādīšana un uzstādīšana
Follow these steps to install your RESTMO Sprinkler Timer:
Image: Four-panel diagram showing the installation process: installing batteries, attaching to faucet, attaching hose, and setting the program.
- Bateriju uzstādīšana: Open the waterproof battery compartment. Insert 2 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity. Close the compartment securely. Keep your hands dry during this process.
- Piestiprināšana pie krāna: Screw the timer's brass inlet onto your 3/4" outdoor faucet. Hand-tighten firmly. For a leak-proof connection, wrap Teflon tape around the faucet threads before attaching the timer.
- Pievienojiet šļūteni: Connect your garden hose to the 3/4" hose connection at the bottom of the timer. Ensure it is tightly secured.
- Ieslēdziet krānu: Open your faucet fully. The timer is designed to operate under water pressure.
Lietošanas instrukcijas
1. Iestatiet pulksteni
This step sets the current time on the timer.
- Pagrieziet ripu uz IESTATĪT PULKSTENI.
- Nospiediet pogu +/- pogas, lai iestatītu pašreizējo stundu un minūti.
- Nospiediet pogu OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
2. Set Start Time
This sets when your automatic watering program will begin.
- Pagrieziet ripu uz SĀKUMA LAIKS.
- Nospiediet pogu +/- pogas, lai iestatītu vēlamo sākuma laiku.
- Nospiediet pogu OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
3. Set Watering Duration (How Long)
This sets how long the watering will last for each cycle.
- Pagrieziet ripu uz CIK ILGI.
- Nospiediet pogu +/- buttons to set the watering duration from 1 minute to 239 minutes.
- Nospiediet pogu OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
4. Set Watering Frequency (How Often)
This sets how often the watering cycles will repeat.
- Pagrieziet ripu uz CIK BIEŽI.
- Nospiediet pogu +/- buttons to set the watering frequency: from 1 hour to 12 hours, or from 1 day to 7 days.
- Nospiediet pogu OK button to switch between hour and day/hour setup.
- Turn the dial to any other position to save changes.
Image: Visual guide showing the range for 'How Long' (1-239 mins) and 'How Often' (1hr-7 days) settings.
5. Automātiskā laistīšana
Once programmed, turn the dial to ON to activate the automatic watering schedule. The LCD screen will display the remaining time of the current watering program when watering is active. When watering is off, the screen will flash between the next watering start time and the current time.
Image: Depicts the timer set to 'ON' for automatic watering, with a visual representation of the watering duration and frequency settings.
6. Manuāla laistīšana
To water manually without affecting your programmed schedule:
- With the dial at ON, long press the OK/MANUAL pogu 3 sekundes.
- Nospiediet pogu +/- buttons to select the desired manual watering duration (1 to 239 minutes).
- Nospiediet OK to switch between hour and minute. The setup flashes 3 times and manual watering will automatically start.
- To cancel manual watering, turn the dial to IZSLĒGTS un tad atpakaļ uz ON.
Image: Shows how to activate manual watering and adjust its duration, with a visual of water flowing from the hose.
7. Lietus kavēšanās
To temporarily pause your watering schedule due to rain or other reasons:
- With the dial at ON, long press the DELAY + pogu 3 sekundes.
- Nospiediet pogu +/- buttons to select a delay of 12, 24, 48, or 72 hours.
- Nospiediet OK or wait for 3 seconds to start the rain delay.
- To cancel rain delay, turn the dial to IZSLĒGTS un tad atpakaļ uz ON.
Image: Illustrates the rain delay function with options for 12, 24, 48, and 72-hour delays.
8. Stop Watering
Lai pilnībā apturētu visas laistīšanas programmas:
- Pagrieziet ripu uz IZSLĒGTS. The timer will keep off until the dial is turned to ON atkal.
Image: Shows the timer dial set to 'OFF', indicating that watering has stopped.
Apkope
- Tīrīšana: Periodically check the brass inlet filter washer for debris and clean it to ensure optimal water flow.
- Akumulatora nomaiņa: When the battery indicator on the LCD screen shows low power, replace the batteries promptly to avoid interruption of watering schedules.
- Ziemošana: Before the first frost, disconnect the timer from the faucet and hose. Remove the batteries and store the timer indoors in a dry, protected area to prevent damage from freezing.
Problēmu novēršana
Šeit ir dažas izplatītas problēmas un to risinājumi.
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Taimeris neieslēdzas/LCD ekrāns ir tukšs | Izlādējušās vai nepareizi ievietotās baterijas. | Replace batteries with new 2 x AAA alkaline batteries, ensuring correct polarity. |
| Water not flowing/Timer not watering | Faucet is off; low water pressure; clogged filter; incorrect program settings; valve stuck. | Ensure faucet is fully open. Check water pressure (10-120 psi required). Clean the inlet filter. Verify program settings (start time, duration, frequency). Reset the valves (see video below). |
| Ūdens noplūde no savienojumiem | Loose connections; missing/damaged washer; insufficient Teflon tape. | Tighten all connections. Check for and replace any missing or damaged rubber washers. Apply more Teflon tape to faucet threads. |
| Taimeris neievēro grafiku | Incorrect clock setting; program not activated (dial not on ON); rain delay active. | Re-set the current time. Ensure the dial is set to ON. Check if rain delay is active and cancel if necessary. |
How to Reset the Valves:
If the timer's internal valves are not functioning correctly, you may need to reset them. This process involves cycling water through the timer manually to clear any obstructions or reset the mechanism.
Video: A step-by-step guide on how to reset the internal valves of the RESTMO Sprinkler Timer to ensure proper water flow.
Specifikācijas
- Modelis: O-HT
- Materiāls: Misiņš, metāls
- Ieplūdes vītne: 3/4" NH (Pure Brass)
- Hose Fitting: 3/4 collas
- Laistīšanas ilgums: 1-239 minūtes
- Laistīšanas biežums: 1–12 stundas vai 1–7 dienas
- Lietus aizkaves opcijas: 12/24/48/72 stundas
- Max. Flow Rate: 10 GPM (35 L/Min)
- Darba spiediens: 10–120 PSI (0.5–8.0 bar)
- Temperatūras diapazons: 38 līdz 120 °F (3 līdz 50 °C)
- Ūdensizturības vērtējums: IP54
- Barošanas avots: 2 x AAA sārma baterijas (nav iekļautas komplektā)
- Produkta izmēri: 3.94"D x 3.94"W x 1.57"H
- Preces svars: 5 unces
Garantija un atbalsts
RESTMO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo webvietne. Mūsu klientu apkalpošanas komanda ir pieejama, lai atbildētu uz visiem jautājumiem vai bažām.
