1. Ievads
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TP-ET 18 Li BL-Solo 18V Cordless Compact Router. Please read these instructions carefully before using the tool and keep them for future reference.
The Einhell TP-ET 18 Li BL-Solo is a versatile cordless compact router designed for precision woodworking tasks such as edge milling, grooving, and decorative profiling. It features a powerful brushless motor for extended runtime and performance, electronic speed control, and a continuously adjustable milling depth.
2. Vispārīgi drošības norādījumi
BRĪDINĀJUMS: Izlasiet visus drošības brīdinājumus, instrukcijas, ilustrācijas un specifikācijas, kas pievienotas šim elektroinstrumentam. Visu tālāk norādīto instrukciju neievērošana var izraisīt elektriskās strāvas triecienu, aizdegšanos un/vai nopietnus savainojumus.
2.1. Darba zonas drošība
- Uzturiet darba zonu tīru un labi apgaismotu. Pārblīvētas vai tumšas vietas izraisa negadījumus.
- Nedarbiniet elektroinstrumentus sprādzienbīstamā vidē, piemēram, uzliesmojošu šķidrumu, gāzu vai putekļu klātbūtnē. Elektroinstrumenti rada dzirksteles, kas var aizdedzināt putekļus vai izgarojumus.
- Strādājot ar elektroinstrumentu, turiet bērnus un apkārtējos cilvēkus tālāk. Traucējumi var izraisīt kontroles zaudēšanu.
2.2 Elektriskā drošība
- Elektroinstrumentu spraudņiem jāatbilst kontaktligzdai. Nekādā veidā nepārveidojiet kontaktdakšu.
- Izvairieties no ķermeņa saskares ar iezemētām virsmām, piemēram, caurulēm, radiatoriem, plītīm un ledusskapjiem. Ja jūsu ķermenis ir iezemēts vai iezemēts, pastāv palielināts elektriskās strāvas trieciena risks.
- Nepakļaujiet elektroinstrumentus lietus vai mitra laika iedarbībai. Ūdens iekļūšana elektroinstrumentā palielina elektriskās strāvas trieciena risku.
2.3 Personiskā drošība
- Vienmēr valkājiet acu aizsargus. Izmantojiet aizsargbrilles, aizsargbrilles vai sejas aizsargu.
- Ilgstoši strādājot ar elektroinstrumentiem, valkājiet dzirdes aizsargus.
- Ģērbies pareizi. Nevalkājiet vaļīgu apģērbu vai rotaslietas. Turiet matus un apģērbu tālāk no kustīgajām daļām.
- Esiet modrs, skatieties, ko darāt, un, strādājot ar elektroinstrumentu, izmantojiet veselo saprātu.
- Nespiediet elektroinstrumentu ar spēku. Izmantojiet savam lietojumam atbilstošu elektroinstrumentu.
- Pirms jebkādu regulēšanu, piederumu maiņas vai elektroinstrumentu uzglabāšanas atvienojiet akumulatoru no elektroinstrumenta.
- Glabājiet dīkstāvē esošos elektroinstrumentus bērniem nepieejamā vietā un neļaujiet personām, kuras nav iepazinušās ar elektroinstrumentu vai šīs instrukcijas, strādāt ar elektroinstrumentu.
- Apkopiet elektroinstrumentus un piederumus. Pārbaudiet, vai kustīgās daļas nav noregulētas vai nav salipušas, daļas nav salauztas un citi apstākļi, kas var ietekmēt elektroinstrumenta darbību.
3. Sastāvdaļas un iepakojuma saturs
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router package includes the following items:
- Einhell TP-ET 18 Li BL-Solo Compact Router (Tool Only)
- 2 x Collets (6mm and 8mm)
- Edge Milling Attachment
- 2 x Spanner Wrenches
- Copy Sleeve
- Suction Adapter
- Paralēlā pietura
- Compass Tip
Note: Battery and charger are NOT included with this 'Solo' version and must be purchased separately as part of the Einhell Power X-Change system.
Figure 1: Einhell TP-ET 18 Li BL-Solo Cordless Compact Router with included accessories. This image displays the main router unit, two collets, two spanner wrenches, an edge milling attachment, a copy sleeve, a suction adapter, a parallel stop, and a compass tip.
4. Iestatīšana
4.1 Akumulatora uzstādīšana
- Ensure the router is switched off.
- Align the battery pack with the battery port on the top of the router.
- Iebīdiet akumulatoru portā, līdz tas droši nofiksējas savā vietā.
- Lai izņemtu, nospiediet akumulatora bloka atbrīvošanas pogu un izbīdiet to ārā.
Figure 2: The Einhell TP-ET 18 Li BL-Solo router is supplied without a battery or charger, highlighting the need for separate purchase of Power X-Change batteries.
4.2 Frēzes uzgaļa uzstādīšana
- Drošības nolūkos pārliecinieties, vai akumulators ir izņemts.
- Nospiediet un turiet vārpstas bloķēšanas pogu, lai novērstu vārpstas griešanos.
- Loosen the collet nut using one of the provided spanner wrenches.
- Insert the desired router bit into the collet, ensuring it is seated firmly but not bottomed out.
- Tighten the collet nut securely with the spanner wrench while holding the spindle lock.
3. attēls: Tuvplāns view of the spindle lock button and collet area, essential for safe and easy router bit changes.
4.3 Attaching the Base Plate and Dust Extraction
- The transparent base plate is pre-installed. Ensure it is clean and free of debris.
- To attach the dust extraction adapter, align it with the designated port on the base plate and secure it. This allows connection to an external vacuum cleaner for a cleaner work environment.
Figure 4: The transparent base plate provides visibility of the workpiece during operation. The dust extraction port is visible for connecting a vacuum.
4.4 Adjusting Milling Depth
- Atlaidiet dziļuma regulēšanas sviru.
- Rotate the fine adjustment knob to set the desired milling depth. The scale on the side indicates the depth in millimeters.
- Once the desired depth is set, tighten the depth adjustment lever to secure the router in position.
4.5 Attaching Guides (Parallel Stop, Compass Tip, Guide Roller)
Depending on your application, various guides can be attached to the router base for enhanced precision:
- Parallel Stop: Used for routing parallel to an edge. Slide the parallel stop into the slots on the router base and secure it at the desired distance from the bit.
- Compass Tip: For cutting perfect circles. Attach the compass tip to the base and pivot it around a central point.
- Guide Roller: For following curved edges or templates. Attach the guide roller to the base, ensuring it makes contact with the guide surface.
5. Lietošanas instrukcijas
5.1 Ieslēgšana/izslēgšana
- To turn the router ON, slide the power switch to the 'I' position.
- To turn the router OFF, slide the power switch to the 'O' position.
5.2 Ātruma kontrole
The router features electronic infinitely variable speed control. Adjust the speed dial to match the material and router bit being used. Higher speeds are generally suitable for smaller bits and softer materials, while lower speeds are for larger bits and harder materials.
Figure 5: The speed control dial allows for precise adjustment of the router's RPM to suit different materials and applications.
5.3 Maršrutēšanas metodes
- Vienmēr pārliecinieties, ka sagatave ir droši nostiprinātaamppirms frēzēšanas.
- Ieslēdziet frēzi pirms saskares ar sagatavi.
- Move the router smoothly and consistently along the desired path. Avoid sudden movements or excessive pressure.
- For best results and to prevent kickback, always feed the router against the direction of bit rotation.
- When routing edges, use the edge milling attachment for precise chamfering.
5.4 Putekļu savākšana
For a cleaner work environment and improved visibility, connect a suitable wet/dry vacuum cleaner to the suction adapter. This helps to remove wood chips and dust during operation.
6. Apkope
6.1. Tīrīšana
- Pirms tīrīšanas vienmēr atvienojiet akumulatoru.
- Regularly clean the router housing, base plate, and collet area to remove dust and debris. Use a soft brush or compressed air.
- Neizmantojiet agresīvus tīrīšanas līdzekļus vai šķīdinātājus.
6.2 Frēzes uzgaļa kopšana
- Frēzes uzgaļus uzturiet asus un tīrus. Neasi uzgaļi var izraisīt pārkaršanu un sliktu griešanas veiktspēju.
- Store bits in a protective case to prevent damage.
6.3 Vispārējā pārbaude
- Check all screws and fasteners regularly to ensure they are tight.
- Inspect the power cord (if applicable, for charger) for damage.
- Ensure all ventilation openings are clear to prevent overheating.
7. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Maršrutētājs neieslēdzas | Akumulators nav pareizi ievietots vai izlādējies. | Check battery connection; charge or replace battery. |
| Poor cutting quality / Rough edges | Neass vai bojāts frēzes uzgalis. Nepareizs ātruma iestatījums. | Replace bit; adjust speed according to material. |
| Pārmērīga vibrācija | Router bit not properly secured. Damaged bit. | Re-tighten collet nut; replace damaged bit. |
| Motors pārkarst | Bloķētas ventilācijas atveres. Instrumenta pārslodze. | Clean ventilation slots; reduce cutting depth/feed rate. |
8. Specifikācijas
| Funkcija | Specifikācija |
|---|---|
| Modelis | TP-ET 18 Li BL-Solo |
| Daļas numurs | 4350415 |
| Voltage | 18 Volts (Power X-Change) |
| Motora tips | Bez suku |
| Pacelšanas augstums | 40 mm |
| Ieliktņu izmēri | 6 mm, 8 mm |
| Maks. rotācijas ātrums | 3000 RPM (Note: Product description states 3000 RPM, title states 30000 RPM. Please verify with manufacturer for accurate specification.) |
| Produkta izmēri | 9.3 x 9.3 x 18.2 cm |
| Preces svars | 1.34 kg |
| Materiāls | Alumīnijs, plastmasa |
| Barošanas avots | Darbojas ar akumulatoru (litija jonu) |
Figure 6: The Einhell TP-ET 18 Li BL-Solo is part of the Power X-Change family, allowing battery compatibility across a wide range of Einhell tools.
Figure 7: Illustration highlighting the benefits of the PurePOWER brushless motor, including increased lifespan, runtime, and power compared to conventional motors.
9. Garantija un atbalsts
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router comes with a 2-year warranty, ensuring safety and durability for your DIY projects. For warranty claims, technical support, or to explore other Einhell products, please visit the official Einhell store or contact customer service.
Oficiālais zīmola veikals: Einhell Canada Store
10. Produktu video
No official product videos from the seller directly related to the Einhell TP-ET 18 Li BL-Solo Cordless Compact Router were found in the provided data. Videos available were either for related products from other brands, from influencers, or for different Einhell tools.
