Poly Wall Mount for TC10 Instruction Manual

Ievads

The Poly Wall Mount for TC10 is designed to provide a secure, elegant, and professional way to position your Poly TC10 device. This mount ensures optimal visibility and accessibility for the TC10, making it an ideal solution for various environments where the TC10 needs to be wall-mounted.

Drošības informācija

• Always ensure the mounting surface is structurally sound and can support the weight of the mount and the Poly TC10 device.
• Uzstādīšanai izmantojiet atbilstošus instrumentus un aparatūru. Ja neesat pārliecināts, konsultējieties ar kvalificētu speciālistu.
• Glabājiet mazās detaļas un iepakojuma materiālus bērniem nepieejamā vietā, lai novērstu aizrīšanās risku.
• Do not overtighten screws, as this may damage the mount or the mounting surface.
• Ensure all cables are routed safely to prevent tripping hazards or damage.

Kas atrodas kastē

Pirms instalēšanas sākšanas pārliecinieties, vai visas sastāvdaļas ir klāt.

• Wall mount for TC10
• Mounting hardware (screws, anchors - specific types may vary based on package)

Uzstādīšana un uzstādīšana

Follow these steps to properly install your Poly Wall Mount for TC10.

Nepieciešamie rīki (nav iekļauti):

• Urbt
• Skrūvgriezis (ieteicams Phillips galviņa)
• Zīmulis
• Līmenis

Uzstādīšanas soļi:

1. Izvēlieties atrašanās vietu: Select a suitable wall location for the Poly TC10, ensuring it is at an appropriate height for interaction and visibility. Consider proximity to power outlets and network connections for the TC10.
2. Atzīmējiet urbšanas punktus: Hold the wall mount against the desired location on the wall. Use a pencil to mark the positions for drilling through the mounting holes on the bracket. Use a level to ensure the marks are aligned horizontally.
3. Urbt pilota caurumus: Using an appropriate drill bit size for your wall anchors (if applicable) and screws, drill pilot holes at the marked points.
4. Ievietojiet enkurus (ja nepieciešams): If drilling into drywall or other hollow surfaces, insert wall anchors into the pilot holes until flush with the wall surface.
5. Piestipriniet stiprinājumu pie sienas: Align the wall mount with the drilled holes (and anchors). Insert the provided screws through the mount's holes and into the wall/anchors. Tighten the screws securely with a screwdriver, but do not overtighten.
6. Mount Poly TC10: Carefully align the Poly TC10 device with the mounted bracket. Gently slide or click the TC10 into place on the wall mount, ensuring it is securely seated and locked. Refer to the Poly TC10's own manual for specific attachment instructions if necessary.
7. Kabeļu vadība: Route any necessary cables (power, network) for the TC10 neatly behind or alongside the mount to maintain a clean and professional appearance.

Image: Poly TC10 securely mounted on a wall using the Poly Wall Mount.

Stiprinājuma lietošana

The Poly Wall Mount is a passive accessory designed to hold the Poly TC10. Its operation is integrated with the use of the TC10 device itself.

• Once the TC10 is securely mounted, it is ready for use as per its own operational guidelines.
• The mount provides a stable and fixed position for the TC10, allowing for consistent interaction.
• Ensure the TC10 is properly seated in the mount at all times to prevent accidental dislodgement.

Apkope

To ensure the longevity and appearance of your wall mount:

• Clean the mount periodically with a soft, dry cloth.
• Izvairieties no abrazīvu tīrīšanas līdzekļu vai šķīdinātāju lietošanas, jo tie var sabojāt apdari.
• Periodiski pārbaudiet stiprinājuma skrūves, lai nodrošinātu, ka tās ir cieši pievilktas un nostiprinātas.

Problēmu novēršana

Specifikācijas

Garantija un atbalsts

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Poly website. For technical support or further assistance, please contact Poly customer service through their official support channels.

Official Poly Webvietne: www.poly.com