efperfect Modern 3 Lights Glass Pendant Light Instruction Manual

Ievads

Paldies par pirkumuasing the efperfect Modern 3 Lights Glass Pendant Light, model EF1408736001. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

This pendant light features three distinct smoky gray glass lampshades, designed to enhance various indoor spaces with a blend of modern and vintage estētika.

Figure 1: The efperfect Modern 3 Lights Glass Pendant Light, showcasing its design in a bright room.

Figure 2: The pendant light enhancing a dining room setting.

Figure 3: The pendant light providing illumination in a bedroom.

Drošības informācija

• BRĪDINĀJUMS: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before installation or servicing.
• Visiem elektriskajiem savienojumiem jāatbilst vietējiem noteikumiem, noteikumiem vai Nacionālajam elektrības kodeksam (NEC). Ja neesat pazīstams ar elektroinstalāciju, konsultējieties ar kvalificētu elektriķi.
• Ensure the fixture is securely mounted to a structural component of the ceiling.
• Nepārsniedziet maksimālo jaudutage norādīts spuldzēm.
• Ar stikla detaļām rīkojieties uzmanīgi, lai tās nesaplīstu.
• Šis armatūra ir paredzēta lietošanai tikai iekštelpās.

Iepakojuma saturs

Pirms turpināt uzstādīšanu, pārliecinieties, vai visas sastāvdaļas ir klāt un nav bojātas.

• Ceiling Canopy with integrated wiring
• 3 Stikls Lampshades (various shapes and sizes)
• Mounting Hardware (crossbar, mounting screws, wire connectors)
• Adjustable Hanging Wires (pre-attached to canopy and lamp turētāji)
• Lietošanas pamācība

Piezīme: E26 spuldzes nav iekļautas komplektā un jāiegādājas atsevišķi.

Specifikācijas

Uzstādīšana un uzstādīšana

Ieteicama profesionāla uzstādīšana. Pirms turpināt, pārliecinieties, vai strāvas padeve ir IZSLĒGTA ar ķēdes slēdzi.

1. Sagatavojieties uzstādīšanai

• Turn off electricity at the main fuse box or circuit breaker.
• Uzmanīgi izpakojiet visas sastāvdaļas un pārbaudiet, vai nav bojājumu.
• Sagatavojiet nepieciešamos instrumentus (skrūvgriezi, vadu noņēmējus, izolācijas lenti, kāpnes).

2. Mount the Crossbar

Attach the mounting crossbar to the junction box in your ceiling using the provided screws. Ensure it is securely fastened.

Figure 4: Installation diagram illustrating the mounting process and electrical connections.

3. Vadu savienojumi

• Pievienojiet armatūras zemējuma vadu (parasti tukšu vara vai zaļu) mājas zemējuma vadam.
• Pievienojiet armatūras neitrālo vadu (parasti baltu) mājas neitrālajam vadam (baltam).
• Connect the fixture's live wire (usually black) to the house live wire (black).
• Secure all connections with wire connectors and wrap with electrical tape for added safety.

5. attēls: detalizēti view of the ceiling canopy and wiring points before final installation.

4. Secure the Ceiling Canopy

Carefully tuck all wires into the junction box. Align the ceiling canopy with the mounting screws on the crossbar and secure it with the provided decorative nuts or screws.

5. Adjust Hanging Wires

The hanging wires for each glass globe are adjustable. To adjust the length, gently push the small pin on the canopy where the wire enters, then pull or push the wire to the desired length. Release the pin to lock the wire in place. Ensure the wires are taut and the globes hang evenly or as desired.

Figure 6: The three distinct glass shades with adjustable hanging wires, allowing for customized arrangement.

6. Uzstādiet spuldzes

Screw E26 base bulbs (not included) into each lamp holder. Ensure bulbs are fully seated. The fixture supports incandescent, LED, CFL, and halogen bulbs up to 60W each. For dimming functionality, use dimmable E26 bulbs and a compatible dimmer switch (not included).

Figure 7: Detail of an E26 bulb correctly installed within a glass shade.

7. Attach Glass Shades

Carefully attach each glass lampshade to its respective lamp holder according to the design. Ensure they are securely fastened but do not overtighten.

Figure 8: The efperfect pendant light installed, demonstrating its aesthetic appeal in a living space.

Lietošanas instrukcijas

• Ieslēgšana/izslēgšana: Once installed and power is restored, operate the light fixture using your wall switch.
• Aptumšošanas funkcionalitāte: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the light intensity by using the dimmer switch.

Figure 9: Visual representation of the dimmable feature and potential light color temperatures when using compatible bulbs.

Apkope

• Tīrīšana: Disconnect power before cleaning. Wipe the fixture and glass shades with a soft, dry, or slightly damp audumu. Nelietojiet abrazīvus tīrīšanas līdzekļus vai šķīdinātājus, jo tie var sabojāt apdari vai stiklu.
• Spuldžu nomaiņa: Ensure power is off. Allow bulbs to cool completely before attempting to replace them. Unscrew the old bulb and screw in a new E26 bulb of the appropriate wattage (maks. 60 W).

Problēmu novēršana

Garantijas informācija

efperfect offers a 60-day return service for any damaged or defective product. Additionally, free replacement is provided for any non-working or broken part within five years of purchase. Please retain your proof of purchase for warranty claims.

Klientu atbalsts

If you encounter any issues or have questions regarding your efperfect Modern 3 Lights Glass Pendant Light, please contact our customer support team. We aim to respond to inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official efperfect store online.

Thank you for choosing efperfect.