TCP Economy LED UFO High Bay Luminaire User Manual

1. Ievads

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TCP Economy LED UFO High Bay Luminaire. Please read this manual thoroughly before installation and retain it for future reference.

The TCP Economy LED UFO High Bay Luminaire is designed for commercial and industrial applications, offering high efficacy and a long operational lifespan. It features a robust design suitable for various environments, including warehouses, retail spaces, and gymnasiums.

1. attēls. Priekšpuse view of the TCP Economy LED UFO High Bay Luminaire, showing the LED array and clear lens.

2. Drošības informācija

• Elektriskā drošība: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture.
• Zemējums: Pārliecinieties, vai armatūra ir pareizi iezemēta, lai novērstu elektriskās strāvas triecienu.
• Apstrāde: Do not handle the fixture with wet hands. Avoid touching the LED array directly.
• Darbības vide: This luminaire is rated IP65 for outdoor use and protection against dust and water jets. Do not submerge the fixture in water. Ensure the operating temperature is within the specified range.
• Montāža: The mounting structure must be capable of supporting the weight of the fixture.
• Modifikācijas: Do not attempt to modify or disassemble the fixture. This will void the warranty and may create safety hazards.

3. Iepakojuma saturs

Pēc izsaiņošanas pārbaudiet, vai visas sastāvdaļas ir klāt un nav bojātas. Iepakojumā jābūt:

• 1 x TCP Economy LED UFO High Bay Luminaire
• 1 x Eyebolt for suspended mounting

Note: Additional mounting hardware (e.g., chains, hooks) may be required and is sold separately.

4. Specifikācijas

Figure 2: Approximate dimensions of the luminaire, including height with eyebolt and diameter.

5. Uzstādīšanas instrukcijas (iestatīšana)

This luminaire is designed for suspended mounting. Follow these steps for proper installation:

1. Drošība pirmajā vietā: Ensure power to the installation area is turned OFF at the circuit breaker before beginning any work.
2. Pārbaudiet armatūru: Carefully remove the luminaire from its packaging and inspect for any damage. Do not install if damaged.
3. Sagatavojiet montāžas punktu: Identify a suitable structural mounting point capable of safely supporting the luminaire's weight (6.44 lbs). Install appropriate mounting hardware (e.g., chain, hook) if not already present.
4. Attach Eyebolt: Securely thread the provided eyebolt into the top of the luminaire housing.
5. Suspend Fixture: Carefully lift the luminaire and attach the eyebolt to your chosen mounting hardware. Ensure the fixture is stable and level.
6. Elektroinstalācija:
   • Open the wiring compartment on the top of the fixture.
   • Connect the AC input wires (Line, Neutral, Ground) from your power supply to the corresponding wires on the luminaire. Refer to local electrical codes for proper wiring practices.
   • For 0-10V dimming functionality, connect the purple (DIM+) and gray (DIM-) wires from your 0-10V dimmer to the corresponding dimming wires on the luminaire. If dimming is not desired, cap these wires individually.
   • Pārliecinieties, vai visi savienojumi ir droši un izolēti.
7. Aizvērt nodalījumu: Securely close the wiring compartment cover.
8. Atjaunot jaudu: Kad uzstādīšana ir pabeigta un visi savienojumi ir pārbaudīti, atjaunojiet strāvas padevi pie ķēdes pārtraucēja.

3. attēls: augšdaļa view of the luminaire, illustrating the eyebolt for suspension and the location of the wiring compartment.

6. Darbība

The TCP Economy LED UFO High Bay Luminaire operates immediately upon receiving power.

• Ieslēgšana/izslēgšana: Control the luminaire's power supply via the connected wall switch or circuit breaker.
• Blāva: If connected to a compatible 0-10V dimmer, adjust the light output by manipulating the dimmer control. The luminaire will respond to the 0-10V signal to vary its brightness.

7. Apkope

The TCP Economy LED UFO High Bay Luminaire requires minimal maintenance.

• Tīrīšana: Ensure power is disconnected before cleaning. Use a soft, damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
• Pārbaude: Periodically inspect the fixture and its mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• Nav lietotāja apkalpojamu daļu: There are no user-serviceable parts inside the luminaire. Do not attempt to open or repair the unit.

8. Traucējummeklēšana

If the luminaire is not functioning as expected, perform the following basic checks:

• Nav gaismas:
  • Verify that the power supply to the fixture is active at the circuit breaker and wall switch.
  • Check all wiring connections for proper contact and insulation.
• Aptumšošana nedarbojas:
  • Ensure the 0-10V dimmer is compatible and correctly wired to the luminaire's dimming leads (purple and gray).
  • Verify the dimmer is functioning correctly.
• Mirgošana:
  • Pārbaudiet, vai nav vaļīgu vadu savienojumu.
  • Pārliecinieties, vai ievades tilptage is stable and within the specified range.

If these steps do not resolve the issue, contact customer support for assistance. Do not attempt further repairs yourself.

9. Garantija un atbalsts

This TCP Economy LED UFO High Bay Luminaire is covered by a Piecu gadu ierobežotā garantija against defects in manufacturing. Please retain your proof of purchase for warranty claims.

Figure 4: Warranty statement and product listings (UL and cUL listed, IP65 Rated).

For technical support, warranty inquiries, or replacement parts, please contact TCP customer service:

• Webvietne: www.tcpi.com
• Tālrunis: Refer to TCP's official webvietne ar aktuālajiem kontaktnumuriem.