SRAM Eagle AXS Pod Controller User Manual

Ievads

This manual provides essential information for the proper installation, operation, and maintenance of your SRAM Eagle AXS Pod Controller. Please read this manual thoroughly before using the product to ensure safe and efficient performance.

Figure 1: SRAM Eagle AXS Pod Controller

The SRAM Eagle AXS Pod Controller is an electronic bicycle shifter designed for precise and reliable gear changes. It features a compact design and intuitive controls for an enhanced riding experience.

Drošības informācija

• Always ensure all components are securely fastened before riding. Loose components can lead to loss of control and injury.
• Refer to a qualified bicycle mechanic for installation if you are unsure about any steps.
• Regularly inspect the controller and associated components for wear or damage. Replace worn or damaged parts immediately.
• Keep the controller and battery away from extreme temperatures and moisture.
• Do not attempt to disassemble or modify the controller, as this may void the warranty and cause malfunction.

Iepakojuma saturs

Pārliecinieties, vai iepakojumā ir visi priekšmeti:

• SRAM Eagle AXS Pod Controller (1 unit)
• Montāža Clamp (for handlebar attachment)
• CR2032 baterija (iepriekš uzstādīta vai atsevišķa)
• Īsā lietošanas pamācība (ja piemērojama)

Iestatīšana

1. Installation on Handlebar

1. Pozicionēšana: Determine the optimal position for the controller on your handlebar. The clamp-on mount allows for flexible placement.
2. Pielikums: Atveriet montāžas klamp and place it around the handlebar. Secure the clamp using the provided bolt and a T25 Torx wrench. Tighten to the manufacturer's specified torque (refer to the quick start guide or SRAM's official documentation for exact torque specifications).
3. Orientācija: Adjust the angle of the controller for ergonomic access to the buttons.

Figure 2: Controller mounted on handlebar

The image shows the SRAM AXS Pod Electronic Controller securely mounted on a bicycle handlebar, illustrating its compact design and button placement.

2. Pairing with AXS Components

The AXS Pod Controller must be paired with your SRAM AXS derailleur and other AXS components.

1. Wake Up Components: Ensure all AXS components (derailleur, dropper post if applicable) are awake by pressing their AXS buttons briefly.
2. Ieiet savienošanas pārī režīmā: Press and hold the AXS button on the derailleur until the LED flashes slowly.
3. Pāra kontrolieris: Press and hold the AXS button on the Pod Controller until its LED flashes slowly.
4. Apstipriniet savienošanu pārī: Once both LEDs flash rapidly and then turn solid green, the components are paired. Repeat for any other AXS components.

Figure 3: SRAM AXS Pod Controller

This image displays the SRAM AXS Pod Controller, highlighting its design and the AXS branding, indicating its compatibility within the SRAM AXS ecosystem.

Lietošanas instrukcijas

Pārnesumu pārslēgšana

The AXS Pod Controller features two distinct buttons for shifting. By default, the upper button shifts to a larger cog (easier gear), and the lower button shifts to a smaller cog (harder gear).

• Up-shift (Easier Gear): Nospiediet pogu upper button īsi.
• Down-shift (Harder Gear): Nospiediet pogu lower button īsi.
• Multi-shift: Hold down either button to shift multiple gears in succession. The number of gears shifted can be customized via the AXS app.

Customization with AXS App

For advanced customization, download the SRAM AXS app on your smartphone. The app allows you to:

• Reverse shift logic (upper button for harder gear, lower for easier).
• Adjust multi-shift settings (number of gears shifted per hold).
• Monitor battery levels of all AXS components.
• Update firmware for improved performance and features.

Apkope

Tīrīšana

• Noslaukiet kontrolieri ar reklāmuamp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners.
• Do not spray water directly into the controller or its buttons.

Akumulatora nomaiņa

The AXS Pod Controller uses a CR2032 coin cell battery.

1. Piekļuve akumulatora nodalījumam: Locate the battery cover on the underside of the controller.
2. Izņemiet veco akumulatoru: Use a small coin or flat-head screwdriver to gently open the cover and remove the old CR2032 battery.
3. Ievietojiet jaunu akumulatoru: Ievietojiet jaunu CR2032 bateriju ar pozitīvo (+) pusi uz augšu.
4. Drošs vāks: Replace the battery cover and ensure it is securely closed to maintain water resistance.

Piezīme: Atbrīvojieties no izlietotajām baterijām atbildīgi saskaņā ar vietējiem noteikumiem.

Problēmu novēršana

Specifikācijas

Garantija un atbalsts

SRAM products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM webvietnē vai garantijas kartē, kas iekļauta jūsu produkta komplektācijā.

For technical support, troubleshooting assistance, or to locate an authorized service center, please visit the official SRAM support page: www.sram.com/en/sram/support