Parkside PIFDS 120 A1 invertora metināšanas iekārtas lietošanas instrukcija

1. Ievads

Thank you for choosing the Parkside PIFDS 120 A1 Inverter Welder. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new welding machine. Please read these instructions carefully before first use and keep them for future reference.

The Parkside PIFDS 120 A1 is a compact and powerful inverter welder designed for mobile use. It operates without the need for shielding gas, making it suitable for both experienced users and beginners. The synergistic rotary knob allows for easy adjustment to material thickness, ensuring optimal welding results.

2. Drošības instrukcijas

Always prioritize safety when operating welding equipment. Failure to follow these safety guidelines can result in serious injury or damage to property.

• Valkājiet atbilstošus individuālos aizsardzības līdzekļus (IAL): This includes a welding helmet with suitable shade, welding gloves, protective clothing, and safety shoes. The included protective shield should be used.
• Nodrošiniet pareizu ventilāciju: Welding fumes can be hazardous. Work in a well-ventilated area or use fume extraction.
• Novērst elektriskās strāvas triecienu: Ensure the welder is properly grounded. Do not operate in wet conditions. Inspect cables for damage before each use.
• Ugunsgrēka novēršana: Remove flammable materials from the welding area. Have a fire extinguisher readily available.
• Eye and skin protection: Welding arc rays can cause severe burns to eyes and skin. Never look at the arc without proper eye protection.
• Bērni un garāmgājēji: Turiet bērnus un nepiederošas personas prom no metināšanas zonas.

3. Iepakojuma saturs

Carefully unpack the device and check for completeness. If any parts are missing or damaged, contact your retailer.

• Parkside PIFDS 120 A1 Inverter Welder
• Welding Protective Shield
• 0.45 kg Welding Wire (0.9 mm)
• 1 Burner Nozzle (pre-mounted)
• 4 Welding Nozzles (1 pre-mounted, for Ø 0.6 / 0.8 / 0.9 / 1.0 mm)
• 1 Slag Hammer with Wire Brush
• 1 Carrying Strap
• Lietošanas pamācība

1. attēls: The product packaging for the Parkside PIFDS 120 A1 Inverter Welder, showing the welder and included accessories.

4. Iestatīšana

Before operating the welder, ensure it is set up correctly.

1. Izvietojums: Place the welder on a stable, level surface. Ensure adequate space for ventilation around the unit.
2. Install Welding Wire: Open the wire compartment and carefully install the 0.9 mm welding wire spool. Thread the wire through the feed mechanism and into the welding cable.
3. Attach Ground Cable: Connect the ground cable with its powerful clamp to the workpiece. Ensure a clean, secure connection for optimal electrical contact.
4. Select Welding Nozzle: Choose the appropriate welding nozzle for your wire diameter (0.9 mm is pre-mounted for the included wire).
5. Pievienojiet strāvu: Plug the 4-meter power cable into a suitable 230 V~, 50/60 Hz power outlet.
6. Attach Carrying Strap: If mobile use is intended, attach the carrying strap to the designated points on the welder housing.

2. attēls: Detalizēts view of the welder's front panel, showing the synergistic knob, welding cable connection, and ground cable connection point.

5. Lietošanas instrukcijas

The Parkside PIFDS 120 A1 is designed for gasless flux-cored wire welding.

1. Ieslēgšana: Switch on the welder using the main power switch. The indicator light will illuminate.
2. Pielāgojiet iestatījumus: Use the synergistic rotary knob to select the material thickness (0.8 to 3 mm). The welder will automatically adjust the welding current and wire feed speed for optimal results.
3. Sagatavojiet sagatavi: Ensure the workpiece is clean and free of rust, paint, or grease.
4. Sāciet metināšanu: Position the welding torch close to the workpiece. Press the trigger on the torch to initiate the arc. Maintain a consistent travel speed and arc length.
5. Monitor Overload Protection: The thermal controller with an indicator light provides overload protection. If the light illuminates, the welder has overheated. Allow it to cool down before resuming operation.
6. Pabeigt metināšanu: Release the trigger to stop the arc. Allow the weld to cool before handling.

3. attēls: The Parkside PIFDS 120 A1 Inverter Welder shown with its welding torch, ground clamp, and the included protective welding shield.

6. Apkope

Regulāra apkope nodrošina jūsu metināšanas aparāta ilgmūžību un optimālu veiktspēju.

• Tīrīšana: Regularly clean the welder's exterior with a dry cloth. Use compressed air to clear dust from ventilation slots.
• Pārbaudiet kabeļus: Inspect all welding and power cables for cuts, abrasions, or loose connections before each use. Replace damaged cables immediately.
• Sprausla un kontakta uzgalis: Periodically check and clean the welding nozzle and contact tip. Replace them if they are worn or clogged to ensure consistent wire feed and arc stability.
• Stieples padeves mehānisms: Keep the wire feed mechanism clean and free of debris. Ensure the wire spool rotates smoothly.
• Uzglabāšana: Kad metināšanas aparāts netiek lietots, to uzglabājiet sausā, no putekļiem brīvā vidē.

7. Traucējummeklēšana

Ja rodas problēmas ar metināšanas iekārtu, skatiet tālāk norādītās bieži sastopamās problēmas un risinājumus.

Ja problēma joprojām pastāv pēc šo risinājumu izmēģināšanas, lūdzu, sazinieties ar klientu atbalsta dienestu.

8. Specifikācijas

Technical data for the Parkside PIFDS 120 A1 Inverter Welder:

4. attēls: A visual representation of the technical specifications for the welder.

9. Garantija un atbalsts

This Parkside product comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, spare parts, or warranty inquiries, please contact your retailer or the official Parkside customer service in your region. Information regarding spare parts availability may vary by region.