ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

1. Ievads

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

Attēls: Pāriview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Produkta īpašības

• Brīvroku vadība: Automatically detects presence and ambient light to activate or deactivate lights.
• Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
• Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
• Universāla saderība: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
• Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
• Viegla uzstādīšana: Fits standard junction boxes and requires a neutral wire.
• Izturīgs dizains: Constructed with tough thermoplastic housing for impact and scratch resistance.

Attēls: Detalizēts view of the product features and adjustable settings on the dimmer switch.

3. Drošības informācija

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

• Šī ierīce ir paredzēta uzstādīšanai saskaņā ar Nacionālo elektroinstalācijas kodeksu un vietējiem noteikumiem.
• Šo uzstādīšanu ieteicams veikt kvalificētam elektriķim.
• Izmantojiet tikai vara vadus.
• Pareizai darbībai ir nepieciešams neitrāls vads.
• This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Iepakojuma saturs

• ECOELER Motion Sensor Dimmer Switch
• Sienas plāksne
• Uzstādīšanas instrukcijas (šī rokasgrāmata)
• Montāžas Skrūves
• Elektroinstalācijas vāciņi

Attēls: Produkta izmēri un iekļautie piederumi.

5. Specifikācijas

Image: Universal compatibility with various bulb types and their wattage vērtējumi.

6. Uzstādīšana

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Pirmsinstalēšana

1. Izslēgt strāvu: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage testeris.
2. Noņemiet veco slēdzi: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
3. Identificējiet vadus: Identify the following wires in your electrical box:
   • Hot (Line) Wire: Pārvada strāvu no ķēdes pārtraucēja.
   • Slodzes vads: Savienojas ar gaismas ķermeņiem.
   • Neitrālais vads: (Required) Typically white, often capped together with other neutral wires.
   • Zemējuma vads: (Recommended) Typically bare copper or green.

6.2 Instrukcijas par pieslēgšanu

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

• Savienojiet Melns wire from the switch to the Hot (Line) wire from the wall.
• Savienojiet Sarkans wire from the switch to the Ielādēt wire from the wall.
• Savienojiet Balts wire from the switch to the Neitrāls wire from the wall.
• Savienojiet Zaļš wire from the switch to the Zemējums wire from the wall.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Mounting and Finishing

1. Carefully push all wired connections into the electrical box.
2. Mount the switch into the electrical box using the provided screws.
3. Piestipriniet sienas plāksni.
4. Ieslēdziet strāvas padevi atpakaļ ar ķēdes pārtraucēju.