1. Svarīgi drošības brīdinājumi
Please read this user manual carefully before operating the desk. Failure to follow these instructions may result in injury or damage to the product.
- Keep fingers and other objects clear of the lifting columns to prevent injury during height adjustments.
- Nepārsniedziet maksimālo ietilpību 160 kg (352 mārciņas). Ensure the weight is evenly distributed.
- Ensure the desk is placed on a stable, level surface to prevent tipping.
- Darbības laikā turiet bērnus un mājdzīvniekus prom no galda.
- Do not disassemble or modify the desk's components. Contact support for assistance.
2. Uzstādīšana un montāža
The FLEXISPOT EC5 PRO+DT desk is designed for straightforward assembly. All necessary tools and step-by-step instructions are included in the package.
2.1 Izpakošana
Carefully unpack all components and verify against the parts list provided in the separate assembly guide. Ensure no parts are missing or damaged.
2.2. Montāžas soļi
- Attach the lifting columns to the desk frame using the provided screws.
- Nostipriniet kājas pie pacelšanas kolonnu apakšas.
- Carefully place the tabletop onto the assembled frame. The tabletop features pre-drilled holes for easy alignment.
- Fasten the tabletop to the frame using the designated screws.
- Connect all motor and control panel cables according to the assembly diagram. Ensure all connections are secure.
- It is recommended to have two people for assembly, especially when handling the heavy tabletop and frame, to ensure safety and ease of installation.
3. Lietošanas instrukcijas
The FLEXISPOT EC5 PRO+DT desk features a powerful dual-motor system for smooth and quiet height adjustments.
3.1 Vadības paneļa funkcijas
The control panel allows for precise height adjustments and includes memory presets for convenience.
- Augšupvērstās/lejupvērstās bultiņas (▲ / ▼): Press and hold to adjust the desk height continuously. Release to stop.
- Height Display: Parāda pašreizējo galda augstumu centimetros.
- Atmiņas iestatījumi (1, 2, 3): Press 'M' then a number (1, 2, or 3) to save the current height. To recall a saved height, simply press the corresponding number button.
- Timed Reminder (A): Activates a reminder to change posture after a set period. Refer to the full assembly guide for setting specific intervals.
3.2 Height Adjustment Range
Galda augstumu var regulēt no minimālā 62 cm līdz maksimālajam augstumam 127 cm (without tabletop). The dual motors provide a smooth soft-start and soft-stop motion, with an adjustment speed of up to 35 mm/s and a low operating noise level of less than 50 dB.
4. Apkope
Proper maintenance ensures the longevity and optimal performance of your FLEXISPOT desk.
4.1. Tīrīšana
- The tabletop features a scratch-resistant and easy-to-maintain surface. For general cleaning, wipe with a soft, damp audums.
- For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
- Ensure no liquids seep into the control panel or motor components.
4.2 Vispārēja aprūpe
- Regulāri pārbaudiet visas skrūves un savienojumus, lai pārliecinātos, ka tie ir stingri pievilkti.
- Avoid placing excessively heavy or sharp objects on the desk that could scratch or dent the surface.
- Do not drag the desk across the floor; lift it when moving to prevent damage to the feet or floor.
5. Traucējummeklēšana
If you encounter issues with your FLEXISPOT desk, refer to the following common troubleshooting steps:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Galds nekustas | Power cable disconnected; Control panel cable loose; Overload; Motor error. | Check power connection. Ensure all cables are securely plugged in. Reduce weight on desk. Unplug for 10 seconds, then plug back in to reset. |
| Galds kustas nevienmērīgi | Uneven weight distribution; Obstruction. | Distribute weight evenly. Check for any obstructions under or around the desk. |
| Kļūdas kods displejā | Specifiska sistēmas kļūda. | Refer to the detailed troubleshooting section in the full assembly manual for specific error code interpretations and solutions. Often, a power cycle (unplug and replug) can resolve minor errors. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
6. Specifikācijas
Detailed technical specifications for the FLEXISPOT EC5 PRO+DT Height Adjustable Desk:
- Zīmols: FLEXISPOT
- Modeļa numurs: EC5 PRO+DT
- Desk Dimensions (L x W x H): 160 cm x 80 cm x 62-127 cm (adjustable height)
- Galda virsmas materiāls: Wood (FSC-certified MDF with scratch-resistant high-pressure laminate)
- Rāmja materiāls: Metāls
- Krāsa: White Top + White Frame
- Motora tips: Divkāršs motors
- Kravnesība: 160 kg (352 mārciņas)
- Height Adjustment Speed: 35 mm/s (maks.)
- Trokšņa līmenis: < 50 dB
- Funkcijas: Memory Presets, Timed Reminder, Soft Start/Stop
7. Informācija par garantiju
Specific warranty terms and conditions for the FLEXISPOT EC5 PRO+DT desk may vary by region and retailer. Please consult your purchase documentation or contact the retailer from whom you purchased the product for detailed warranty information.
Typically, warranties cover manufacturing defects and functional issues under normal use. Damage resulting from misuse, unauthorized modifications, or exceeding load capacity may not be covered.
8. Atbalsts
For technical assistance, spare parts, or any questions not covered in this manual, please contact FLEXISPOT customer support or your authorized retailer.
When contacting support, please have your product model number (EC5 PRO+DT) and proof of purchase readily available.
