Svarīga drošības informācija
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Pirms lietošanas pārliecinieties, vai visas skrūves un skrūves ir cieši pievilktas.
- Nestāviet uz krēsla.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Iepakojuma saturs
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Assembly hardware kit
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Montāžas instrukcijas
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Izpakojiet sastāvdaļas: Uzmanīgi izņemiet visas detaļas no iepakojuma un izklājiet tās.
- Piestipriniet riteņus pie pamatnes: Ievietojiet ritentiņus caurumos krēsla pamatnes katras kājas galā. Stingri piespiediet, līdz tie noklikšķ savā vietā.
- Ievietojiet gāzes pacēlāju: Ievietojiet gāzes pacelšanas cilindru krēsla pamatnes centrālajā caurumā.
- Sēdekļa mehānisma salikšana: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Roku balstu piestiprināšana: Piestipriniet roku balstus pie sēdekļa spilvena, izmantojot tam paredzētās skrūves.
- Pievienojiet atzveltni sēdeklim: Attach the backrest to the seat assembly.
- Sēdekļa mezgla uzstādīšana uz gāzes pacēlāja: Uzmanīgi novietojiet salikto sēdekli un atzveltni uz gāzes pacelšanas cilindra.
- Galvas balsta piestiprināšana: Slide the headrest into the slots at the top of the backrest.
- Galīgā pārbaude: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Lietošanas instrukcijas
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Sēdekļa augstuma regulēšana
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Atgulšanas funkcija
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Augstuma regulēšana: Push the lumbar support up or down.
- Dziļuma regulēšana: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Attēls: Detalizēts view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Roku balstu regulēšana
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Attēls: View of the armrest, indicating the mechanism for height adjustment.
Apkope
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Tīrīšana:
- Tīkla un auduma virsmām izmantojiet mīkstu drānu.ampNoskalot ar maigām ziepēm un ūdeni. Izvairīties no spēcīgām ķīmiskām vielām.
- For plastic and metal parts, wipe with a clean, damp audums.
- Do not saturate the chair with water.
- Pārbaude: Periodiski pārbaudiet visas skrūves un bultskrūves, lai pārliecinātos, ka tās ir cieši pievilktas. Ja nepieciešams, pievelciet tās atkārtoti.
- Ritentiņi: Keep casters clean from hair and debris to ensure smooth movement.
- Gāzes lifts: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Problēmu novēršana
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Krēsls neregulē augstumu | Gāzes pacēlāja darbības traucējumi vai svira nav ieslēgta. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Krēsls šūpojas vai ir nestabils | Vaļīgas skrūves vai nevienmērīga montāža. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Riteņi negriežas vienmērīgi | Atkritumi, kas iesprūduši ritenīšos. | Clean any hair, dust, or debris from the caster wheels. |
| Atzveltne neatlaižas vai nefiksējas | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Zīmols | Hbada |
| Modeļa numurs | P2 |
| Krāsa | Balts |
| Kopējais augstums | 105.5–126.5 cm (41.5–49.8 collas) |
| Pamatnes platums | 70 cm (27.6 collas) |
| Sēdekļa platums | 51 cm (20.1 collas) |
| Sēdekļa dziļums | 52 cm (20.5 collas) |
| Sēdekļa augstuma diapazons | 40–48 cm (15.7–18.9 collas) |
| Preces svars | 43 mārciņas |
| Muguras stils | Tīkla mugura |
| Pildījuma materiāls | Atmiņas putas |
| Atzveltnes pozīcijas | 3 (90°, 110°, 135°) |
| Jostas atbalsts | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Galvas balsts | 2D Adjustable (Height, 40° Swivel) |
| Roku balsti | Height Adjustable (7.5 cm / 3 inches range) |
| Maksimālā svara ietilpība | 264 mārciņas |
Garantija un klientu atbalsts
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garantija: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Atgriež: Ir pieejama 30 dienu bezmaksas atgriešanas politika.
- Price Match: A 15-day price match guarantee is offered.
- Klientu apkalpošana: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada webvietne kontaktinformācijai.
