Ievads
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Behringer P24 Personal Monitor. Designed for live performances, the P24 allows musicians to create their own custom monitor mix with ease, ensuring optimal sound clarity on stage. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Svarīgi drošības norādījumi
Always follow these basic safety precautions when using the P24 Personal Monitor:
- Neatveriet ierīci casing. Iekšpusē nav detaļu, ko lietotājs varētu apkalpot.
- Nepakļaujiet ierīci lietum vai mitrumam, lai novērstu ugunsgrēku vai elektriskās strāvas triecienu.
- Nodrošiniet atbilstošu ventilāciju. Neaizbloķējiet ventilācijas atveres.
- Izmantojiet tikai ražotāja norādīto strāvas adapteri.
- Nenovietojiet ierīci siltuma avotu, piemēram, radiatoru, sildītāju, plīšu vai citu ierīču (tostarp amppacēlāji), kas ražo siltumu.
- Aizsargājiet strāvas vadu no uzkāpšanas vai saspiešanas, jo īpaši pie kontaktdakšām, kontaktligzdām un vietā, kur tie iziet no ierīces.
- Atvienojiet ierīci no strāvas zibens negaisa laikā vai, ja tā netiek lietota ilgu laiku.
- Visus apkopes darbus nododiet kvalificētam servisa personālam.
Iestatīšana
1. Izpakošana
Carefully unpack your P24 Personal Monitor and inspect it for any signs of damage during transit. Retain the packaging materials for future transport or storage.
2. Savienojumi
The P24 connects to a compatible digital mixing console or StageConnect hub. Ensure all connections are secure before powering on the device.
- StageConnect Input: Pievienojiet StageConnect cable from your digital mixer or hub to the P24's StageConnect input. This connection typically provides both audio and power.
- Austiņu izeja: Connect your in-ear monitors or headphones to the designated headphone output jack.
- AUX/MIC Input: If using an external auxiliary source or a local microphone, connect it to the AUX/MIC input.
3. Sākotnējā ieslēgšana
Once all connections are made, power on the connected StageConnect system. The P24 will power on automatically and display its current firmware version on the P24M screen.
Lietošanas instrukcijas
Figure 1: Behringer P24 Personal Monitor Front Panel. Šajā attēlā redzams skats no augšas uz leju view of the Behringer P24 Personal Monitor. It features three main control sections: "TALKBACK VOLUME" on the left, "CHANNEL SETTINGS" in the center, and "OUTPUT VOLUME" on the right. Below these sections are twelve individual channel faders, numbered 1 through 12, and an additional fader for "AUX MIC". Each fader has a corresponding numbered button above it. The "TALKBACK VOLUME" section includes a "TALK" button and a rotary knob. The "CHANNEL SETTINGS" section features a small display labeled "P24M V0.2.8", a rotary knob, and "ADJUST PROCEED SETTINGS" text. The "OUTPUT VOLUME" section has a vertical LED meter indicating "LIMIT", "-3", "-6", "-9", "-12", "-18", "-30", and "SIG", along with a large rotary knob and the "behringer" logo.
1. Talkback Volume Control
The TALKBACK VOLUME section (left side of the unit) allows you to control the level of your talkback microphone. Press the RUNĀT button to activate the talkback function, and use the rotary knob to adjust the volume. This is useful for communicating with other musicians or the sound engineer.
2. Kanāla iestatījumi
The KANĀLA IESTATĪJUMI section (center of the unit) features a display and a rotary knob for advanced adjustments. The display shows the unit's model and firmware version (e.g., P24M V0.2.8). Use the rotary knob and the "ADJUST PROCEED SETTINGS" functionality to navigate and modify various channel parameters, such as EQ, panning, or effects sends, depending on the capabilities of the connected StageConnect system.
3. Izvades skaļuma kontrole
The Izejas skaļums section (right side of the unit) controls the overall volume of your personal monitor mix. Use the large rotary knob to adjust the master output level to your headphones. The vertical LED meter provides visual feedback on the output signal level, indicating when the signal is approaching or reaching its limit (clipping).
4. Individual Channel Faders
The P24 features twelve individual channel faders, numbered 1 cauri 12, plus an additional AUX MIC fader. Each fader controls the volume of its corresponding input channel in your personal mix. Move the fader up to increase the volume and down to decrease it. The numbered buttons above each fader may provide additional functionality, such as muting or soloing the channel, depending on the system configuration.
5. Uzraudzība ar austiņām
Connect your headphones or in-ear monitors to the headphone output. Adjust the individual channel faders and the master Izejas skaļums to create a comfortable and balanced personal mix. Ensure the volume is set to a safe listening level to prevent hearing damage.
Apkope
1. Tīrīšana
To clean the P24, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components. Ensure the unit is powered off and disconnected from all sources before cleaning.
2. Uzglabāšana
When not in use for extended periods, store the P24 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage to protect against dust and physical damage.
Problēmu novēršana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Iekārtai nav strāvas. | StageConnect cable not connected or faulty; power source issue. | Pārliecinieties, ka StageConnect cable is securely connected. Verify the power source for the StageConnect system is active. Try a different StageConnect cable if available. |
| Nav skaņas no austiņām. | Headphones not connected; Output Volume too low; individual channel faders down; no signal from mixer. | Check headphone connection. Increase the Izejas skaļums knob. Raise individual channel faders. Verify that the mixer is sending audio to the StageConnect system. |
| Izkropļots audio. | Output Volume too high (clipping); input signal too hot from mixer. | Samaziniet Izejas skaļums. Check the LED meter for clipping and adjust accordingly. Inform the sound engineer to reduce the input signal level from the mixer. |
| Talkback microphone not working. | RUNĀT button not pressed; Talkback Volume too low; microphone issue. | Nospiediet pogu RUNĀT button. Increase the TALKBACK VOLUME knob. Ensure the microphone is properly connected and functional. |
Specifikācijas
- Modelis: P24
- Preces modeļa numurs: 0609-AAM86-US1
- Zīmols: Bēringers
- Produkta izmēri: 8 collu dziļums x 12 collu platums x 3 collu augstums (20.32 cm dziļums x 30.48 cm platums x 7.62 cm augstums)
- Preces svars: 3.78 mārciņas (1.71 kg)
- Savienojamības tehnoloģija: Auxiliary, StageConnect
- Kanālu skaits: 2
- Ražotājs: MusicTribe
Garantijas informācija
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official Behringer website or contact their customer support. Please retain your proof of purchase for warranty claims.
Klientu atbalsts
For technical assistance, service, or further inquiries about your Behringer P24 Personal Monitor, please visit the official Behringer support page or contact their customer service department. Contact information can typically be found on the manufacturer's webvietne.
