1. Ievads
The Intelbras IVP 7000 SMART EX is a wireless passive infrared (PIR) motion sensor designed for robust and reliable intrusion detection. It incorporates advanced signal analysis technology to ensure efficient detection while minimizing false alarms. This sensor is particularly suited for outdoor environments and areas with a high risk of intrusion, offering enhanced security for your property.
This manual provides detailed instructions for the installation, operation, and maintenance of your IVP 7000 SMART EX sensor. Please read it carefully before proceeding with installation and use.
2. Galvenās iezīmes
- Mājdzīvnieku imunitāte: Designed to ignore pets weighing up to 30 kg (approximately 66 lbs), reducing false alarms caused by animals.
- Dual PIR Detection: Utilizes two passive infrared sensors for more accurate and reliable motion detection.
- Adjustable PIR Sensitivity: Allows customization of detection sensitivity to suit specific environmental conditions.
- LED statusa indikators: Provides visual feedback on detection events and sensor status.
- Anti-Tamper slēdzis: Triggers an alarm if the sensor cover is opened or the unit is forcibly removed from its mounting location.
- Articulated Mounting Bracket: Includes a flexible bracket for easy and precise positioning during installation.
- Zema akumulatora uzlādes līmeņa indikators: Notifies users when the battery level is low, ensuring continuous operation.
- Optiskais filtrs: Enhances detection accuracy and reduces interference from external light sources.
3. Iestatīšana un instalēšana
Proper installation is crucial for optimal performance of your IVP 7000 SMART EX sensor. Follow these steps carefully.
3.1 Izpakošana un komponentu pārbaude
Pirms uzstādīšanas pārliecinieties, vai ir visas sastāvdaļas:
- IVP 7000 SMART EX Sensor Unit
- Articulated Mounting Bracket
- Screws and Wall Plugs for mounting
- Lietotāja rokasgrāmata (šis dokuments)
3.2 Akumulatora uzstādīšana
The sensor operates on batteries (type not specified, typically 3V lithium). Open the sensor casing carefully to access the battery compartment. Insert the batteries, observing the correct polarity (+/-). Close the casing droši.
3.3 Montāžas vietas izvēle
Izvēlieties montāžas vietu, kas nodrošina netraucētu view of the area to be protected. Avoid aiming the sensor directly at heat sources, reflective surfaces, or areas with strong air currents. For outdoor use, consider protection from direct rain and sunlight, although the sensor is designed for outdoor environments.
1. attēls. Priekšpuse view of the IVP 7000 SMART EX sensor, showing the PIR lens and Intelbras branding.
2. attēls: sāni view of the IVP 7000 SMART EX sensor, illustrating its profile and weather-resistant design.
3.4 Physical Mounting
- Attach the articulated mounting bracket to the desired wall or surface using the provided screws and wall plugs. Ensure it is firmly secured.
- Mount the IVP 7000 SMART EX sensor onto the articulated bracket.
- Adjust the sensor's angle using the bracket to cover the intended detection area.
3. attēls. Aizmugure view of the IVP 7000 SMART EX sensor, highlighting the mounting points for the articulated bracket.
3.5 Pairing with Control Panel (Wireless Configuration)
Refer to your security system's control panel manual for specific instructions on how to pair a new wireless sensor. Generally, this involves putting the control panel into 'learning' mode and then triggering the sensor (e.g., by opening the tamper switch or walking in front of it) to register it with the system.
3.6 PIR Sensitivity Adjustment
The sensor features adjustable PIR sensitivity. Consult the internal dip switches or potentiometer (if present) inside the sensor casing to fine-tune the detection range and responsiveness. Test the sensor after adjustment to ensure optimal performance and pet immunity.
4. Lietošanas instrukcijas
Once installed and configured, the IVP 7000 SMART EX operates automatically to detect motion.
4.1. Kustības noteikšana
The dual PIR sensors detect changes in infrared radiation caused by movement of warm bodies. When motion is detected within its coverage area, the sensor transmits a signal to the connected control panel.
4.2 LED indikators
The LED indicator on the sensor provides visual feedback:
- Brief Flash: Indicates motion detection.
- Continuous Light/Specific Pattern: May indicate low battery or a tamper event (refer to specific model documentation for exact patterns).
4.3 Mājdzīvnieku imunitāte
The pet immunity feature allows pets up to 30 kg to move freely within the detection zone without triggering an alarm. For this feature to work effectively, ensure the sensor is mounted at the recommended height and its sensitivity is correctly adjusted, as described in the setup section.
5. Apkope
Regular maintenance ensures the longevity and reliable operation of your sensor.
- Tīrīšana: Periodically clean the sensor lens with a soft, dry cloth to remove dust, dirt, or cobwebs that could obstruct detection. Do not use abrasive cleaners or solvents.
- Akumulatora nomaiņa: When the low battery indicator activates, replace the batteries promptly. Use only recommended battery types.
- Regulāras pārbaudes: Test the sensor periodically (e.g., monthly) by walking through its detection zone to ensure it is functioning correctly and communicating with the control panel.
- Tamper slēdzis: Pārliecinieties, vai sensors casing is always securely closed to prevent tamper trauksmes signāli.
6. Traucējummeklēšana
If you encounter issues with your IVP 7000 SMART EX sensor, refer to the following common problems and solutions.
- Viltus trauksmes signāli:
- Check for heat sources (heaters, direct sunlight) or strong air currents (vents, open windows) in the detection zone.
- Adjust PIR sensitivity to a lower setting.
- Ensure pet immunity is correctly configured and pets are within the specified weight limit.
- Notīriet sensora lēcu.
- Nav noteikšanas:
- Verify batteries are correctly installed and not depleted. Replace if necessary.
- Check if the sensor is properly paired with the control panel.
- Pārliecinieties, vai noteikšanas zonā nav šķēršļu.
- Increase PIR sensitivity if needed.
- Zema akumulatora uzlādes līmeņa indikators:
- Replace the batteries immediately with new ones of the correct type.
- Tamper Trauksme:
- Pārliecinieties, vai sensors casing ir pilnībā aizvērts un nostiprināts.
- Check if the sensor is firmly mounted to prevent accidental removal.
7. Specifikācijas
| Ražotājs | Intelbras (Generic in listing, but Intelbras on product) |
| Modelis | IVP 7000 SMART EX |
| Krāsa | Balts |
| Barošanas avota veids | Electric Power (typically battery-operated for wireless sensors, with electric power referring to the system it connects to) |
| Voltage | 12V (likely for the system, sensor itself uses lower voltage batteries) |
| Produktu skaits | 1 |
| Montāžas veids | Sienas stiprinājums |
| Produkta izmēri (G x P x A) | 10 x 10 x 2 cm (3.94 x 3.94 x 0.79 collas) |
| Mājdzīvnieku imunitāte | Līdz 30 kg |
| Noteikšanas tips | Dual PIR (Passive Infrared) |
| Īpašas funkcijas | Adjustable PIR Sensitivity, LED Status Indicator, Anti-Tamper Switch, Optical Filter |
8. Informācija par garantiju
This product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your purchase or visit the official Intelbras webvietne. Saglabājiet pirkuma apliecinājumu garantijas apstiprināšanai.
9. Atbalsts
For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact Intelbras customer support. Contact information can typically be found on the manufacturer's webvietnē vai uz produkta iepakojuma.
Tiešsaistes resursi: Visit the Intelbras official webvietne ar bieži uzdotajiem jautājumiem, atjauninātām rokasgrāmatām un programmatūras lejupielādēm.
Klientu apkalpošana: Refer to your product packaging or the Intelbras webvietne tālruņu numuriem un e-pasta atbalstam.
