1. Ievads
This manual provides essential information for the safe and effective operation of your ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury. The ComMarker Titan1 is designed for high-precision engraving and marking on various materials, including metals, plastics, and jewelry, offering advanced features like color marking and 3D engraving capabilities.
2. Drošības informācija
The ComMarker Titan1 is a Class 1 Laser Product (IEC 60825-1 Report Number: 2501Q25848E-SFA1, FDA Accession No.: 2521455-000). Despite being a Class 1 product, proper safety precautions are crucial during operation.
- Always wear appropriate laser safety goggles when operating the machine.
- Ensure the work area is well-ventilated to dissipate fumes and particles generated during engraving.
- Never look directly into the laser beam or at reflections from shiny surfaces.
- Turiet viegli uzliesmojošus materiālus prom no gravēšanas zonas.
- Do not operate the machine if any covers are removed or safety interlocks are bypassed.
- Pārliecinieties, vai iekārta ir pareizi iezemēta.
- Familiarize yourself with the emergency stop button location and function.
3. Iepakojuma saturs
Pārliecinieties, vai jūsu iepakojumā ir iekļauti visi tālāk norādītie priekšmeti. Ja kādi priekšmeti trūkst vai ir bojāti, sazinieties ar klientu atbalsta dienestu.
Attēls: Pāriview of the ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine and its accessories.
- ComMarker Titan1 Laser Engraver Body
- Strāvas adapteris
- Datu kabelis
- Pēdu slēdzis
- Lāzera aizsargbrilles
- Allen uzgriežņu atslēgu komplekts
- USB Drive (containing software and drivers)
- Lineāls
- Zemes vads
- Placing Helper (material positioning aids)
- Sample Materials (Rings, Metal Pendants, Pendants)
4. Produkta īpašības
- 60W JPT Mopa Laser Source: Provides high-speed engraving up to 15,000mm/s and supports color marking on stainless steel.
- Augsta precizitāte: Achieves 8K HD accuracy with a precision of 0.01mm.
- Liela gravēšanas zona: Maximum engraving area of 300mm x 300mm.
- Motorized Elevation: Features electric lifting for precise height adjustment and focusing.
- Dual Focusing Modes: Supports both manual and electric focusing for optimal results.
- Programmatūras savietojamība: Compatible with Lightburn and EzCad2 software.
- Plaša materiālu saderība: Engraves stainless steel, aluminum, gold, silver, alloys, most painted products, and non-transparent plastics.
- 3D Engraving & Cutting: Capable of creating depth effects and performing cutting tasks on suitable materials.
- Ilgs kalpošanas laiks: Designed for durability with a laser source lifespan of 100,000 hours.
5. Iestatīšanas rokasgrāmata
- Izpakošana: Uzmanīgi izņemiet visas sastāvdaļas no iepakojuma. Saglabājiet iepakojumu turpmākai transportēšanai vai uzglabāšanai.
- Montāža: Place the laser engraver body on a stable, level surface. Connect the laser head assembly to the main unit, ensuring all fasteners are secure.
- Strāvas pieslēgums: Connect the power adaptor to the machine and then to a grounded electrical outlet (110V).
- Zemējums: Attach the provided ground wire to the designated grounding point on the machine and to a suitable ground source.
- Datu savienojums: Connect the data cable from the machine to your computer.
- Programmatūras instalēšana: Insert the USB drive into your computer. Install the provided EzCad2 software and drivers. If using Lightburn, download and install the latest version from the official Lightburn webvietne.
- Aizsargbrilles: Always put on the laser safety goggles before powering on the machine.
6. Lietošanas instrukcijas
- Ieslēgšana: Ensure all connections are secure and safety goggles are worn. Press the power button on the machine.
- Programmatūras palaišana: Open EzCad2 or Lightburn software on your computer.
- Materiāla izvietojums: Place the material to be engraved on the work platform. Use the placing helpers if needed to secure the material.
- Fokusēšana: Adjust the laser head height using the motorized elevation until the laser is properly focused on the material surface. You can use either manual or electric focusing. Refer to the software's focusing guide for precise adjustment.
- Design Import/Creation: Import your design (BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.) or create a new one within the software.
- Parametru iestatījumi: Set the appropriate laser parameters (power, speed, frequency, passes) based on the material type and desired engraving effect (e.g., color marking, deep engraving, cutting).
- Iepriekšview (Red Light): Use the red light preview function in the software to verify the engraving area and position on your material.
- Sāciet gravēšanu: Kad esat apmierināts ar iepriekšējoview and parameters, initiate the engraving process from the software. You may use the foot switch for convenient start/stop control.
- Uzraudzība: Supervise the engraving process. In case of any issue, press the emergency stop button immediately.
- Izslēgt: After engraving is complete, power off the machine and disconnect it from the power source.
7. Apkope
- Lēcu tīrīšana: Regularly inspect and clean the laser lens with a specialized lens cleaning solution and lint-free wipes to ensure optimal laser performance.
- Darba zona: Keep the work platform and surrounding area clean from debris and dust.
- Ventilācija: Ensure the ventilation system is clear and functioning properly to prevent accumulation of fumes and particles.
- Kabeļa pārbaude: Periodically check all cables for signs of wear or damage. Replace any damaged cables immediately.
- Programmatūras atjauninājumi: Keep your engraving software (Lightburn, EzCad2) updated to the latest version for best performance and compatibility.
8. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Lāzers nešauj | Power not connected; Emergency stop engaged; Software error; Laser source issue. | Check power connections; Release emergency stop; Restart software/computer; Contact support if laser source is suspected. |
| Slikta gravēšanas kvalitāte | Incorrect focus; Dirty lens; Incorrect power/speed settings; Material not flat. | Re-focus the laser; Clean the lens; Adjust engraving parameters; Ensure material is flat and secure. |
| Iekārta neizveido savienojumu ar datoru | Loose data cable; Driver not installed; Software not recognizing device. | Check data cable connection; Install/reinstall drivers from USB drive; Restart software/computer. |
| Unexpected machine shutdown | Overheating; Power fluctuation; Loose power connection. | Ensure proper ventilation; Check power supply stability; Secure power cable. |
9. Specifikācijas
Image: Detailed dimensions of the ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine.
| Funkcija | Detaļas |
|---|---|
| Ražotājs | ComMarker |
| Modeļa numurs | Titan1 Mopa |
| Lāzera avots | 60W JPT Mopa Fiber Laser |
| Lāzera viļņa garums | 1064 nm |
| Gravēšanas ātrums | Līdz 15,000mm/s |
| Gravēšanas precizitāte | 0.01mm, 8K HD |
| Maximum Engraving Area | 300 mm x 300 mm |
| Barošanas avots | AC/DC, 110V |
| Sistēmas saderība | Windows 7/8/10/11, MAC (Lightburn) |
| Supported Graphic Formats | BMP, GIF, JPG, JPEG, DXF, DST, AI, etc. |
| Produkta izmēri | 22 x 25.8 x 21.5 collas (aptuveni 559 x 655 x 546 mm) |
| Lāzera klase | Class 1 Laser Product (IEC 60825-1) |
10. Garantija un atbalsts
For warranty information, please refer to the documentation included with your purchase or contact ComMarker customer support directly. If you encounter any issues not covered in this manual or require technical assistance, please reach out to ComMarker customer service through their official website or the contact information provided at the time of purchase.
Tiešsaistes resursi: For additional guides, software updates, and community support, visit the official ComMarker webvietne.
