ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Ievads

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

1.1. attēls: priekšpuse view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Drošības informācija

To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:

• BRĪDINĀJUMS: elektriskās strāvas trieciena risks. Pirms uzstādīšanas vai apkopes atvienojiet strāvas padevi no drošinātāja vai ķēdes pārtraucēja.
• Šis izstrādājums ir jāuzstāda saskaņā ar piemērojamo uzstādīšanas kodu personai, kas pārzina izstrādājuma uzbūvi un darbību, kā arī ar to saistītos apdraudējumus.
• Use only 120V AC, 60Hz circuits.
• Nemēģiniet izjaukt vai pārveidot armatūru. Iekšpusē nav detaļu, ko lietotājs varētu apkalpot.
• Pārliecinieties, vai visi savienojumi ir droši un pareizi izolēti.
• Šis armatūra ir piemērota lietošanai tikai iekštelpās.

3. Iepakojuma saturs

Pirms instalēšanas sākšanas pārliecinieties, vai ir visas sastāvdaļas:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Stiprinājuma aparatūra (skrūves, stiepļu uzgriežņi)
• E26 Adapter Accessories (for recessed can installation)
• Lietošanas instrukcija (šis dokuments)

3.1. attēls: Komplektā iekļautie uzstādīšanas piederumi.

4. Produkta īpašības

• 3CCT izvēles iespēja: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Kustības sensors: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Pielāgojama laika aizkave: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Gaismas sensors: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Energoefektīvs: 16W LED provides 1000 lumens of brightness.
• Daudzpusīga uzstādīšana: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Iestatīšana un instalēšana

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Noņemiet objektīvu, pagriežot to pulksteņrādītāja virzienā.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Noņemiet objektīvu, pagriežot to pulksteņrādītāja virzienā.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Lietošanas instrukcijas

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Motion Sensor Functionality

• Dienas laikā: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Pārliecinieties, vai strāva ir izslēgta.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Pārliecinieties, vai strāva ir izslēgta.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Apkope

The ECOELER LED ceiling light requires minimal maintenance.

• Tīrīšana: Pirms tīrīšanas pārliecinieties, vai ierīce ir izslēgta. Noslaukiet ierīci ar mīkstu, sausu vai viegli berzētu drānu.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Objektīvs: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Traucējummeklēšana

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Specifikācijas

10. Garantija un atbalsts

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webvietne.

Ražotājs: ECOELER ELECTRIC INC