PetJoy 3 Dog Shock Collar User Manual

Ievads

The PetJoy 3 Dog Shock Collar system is designed to assist in training up to three dogs simultaneously or individually. It features both automatic bark detection and remote-controlled training modes, including beep, vibration, and static stimulation. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure effective and safe use of the device.

Drošības informācija

• This device is intended for training purposes only. Do not use it as a punishment tool.
• Not suitable for aggressive dogs. Consult a professional dog trainer if your dog exhibits aggressive behavior.
• Do not leave the collar on your dog for more than 12 hours per day to prevent skin irritation.
• Regularly check your dog's neck for signs of irritation or sores. If irritation occurs, discontinue use until the skin heals.
• Uzglabāt bērniem nepieejamā vietā.
• Ensure proper fit; the collar should be snug but not overly tight.
• Always start with the lowest stimulation level and gradually increase as needed.

Iepakojuma saturs

Lūdzu, pārliecinieties, ka jūsu iepakojumā ir iekļautas visas tālāk norādītās preces:

• 3 x apkakles siksnas
• 1 x Clicker
• 3 x Shock Collar Receivers
• 1x tālvadības pults
• 2 x Charging Wires
• 1 x Strope

Image: All components included in the PetJoy 3 Dog Shock Collar package.

Produkts beidziesview

Familiarize yourself with the main components of your PetJoy training system.

Image: The PetJoy 3 Dog Shock Collar system, including three receiver collars and the remote control.

Tālvadības pults

• Displeja ekrāns: Shows battery level, selected dog channel, mode, and intensity level.
• Režīma pogas: Separate buttons for Beep, Vibration, and Static Stimulation.
• +/- pogas: Adjust intensity levels for Vibration and Static Stimulation.
• Kanāla poga: Switch between dog channels (1, 2, 3) or control all simultaneously.
• Barošanas poga: Turns the remote on/off and activates/deactivates Auto Mode on the receiver.

Uztvērēja apkakle

• Kontaktpunkti: Deliver static stimulation. Ensure proper contact with the dog's skin.
• Auto Mode Sensor Hole: Detects barking for automatic correction.
• Uzlādes ports: For recharging the receiver battery.
• LED indikators: Shows power status, charging status, and mode activation.

Iestatīšanas rokasgrāmata

1. Ierīču uzlāde

Before first use, fully charge the remote control and all receiver collars. Use the provided charging cables.

• Connect the charging cable to the charging port on the remote and receivers.
• Plug the USB end into a USB power adapter (not included), computer, or power bank.
• The LED indicator on the receiver will show charging status (e.g., red while charging, green when full). The remote display will show battery icon filling up.
• Charging typically takes 2-3 hours. A full charge provides approximately 90 days of work time for the remote and 30 days for receivers.

Image: Charging the remote and receiver collars.

2. Pairing the Remote and Collars

Each receiver collar needs to be paired with the remote control.

1. Ieslēdziet tālvadības pulti.
2. Select the desired channel (1, 2, or 3) for the collar you are pairing using the Channel button.
3. With the receiver collar turned off, press and hold its power button until the LED indicator flashes rapidly.
4. While the receiver LED is flashing, press any mode button (Beep, Vibration, or Shock) on the remote control.
5. If pairing is successful, the receiver LED will stop flashing and remain solid, and the remote will confirm the connection.
6. Repeat for additional collars, selecting a different channel for each.

3. Apkakles uzlikšana

Pareiza piegulšana ir ļoti svarīga efektīvai un drošai darbībai.

• Position the receiver on the underside of your dog's neck, directly below the chin.
• Ensure the contact points touch your dog's skin. You may need to trim long fur for better contact.
• Noregulējiet siksnu tā, lai tā būtu cieši pieguļoša, ļaujot starp siksnu un suņa kaklu ērti ievietot tikai vienu pirkstu.
• The collar should not be too loose, as this can cause inconsistent stimulation and rubbing. It should not be too tight, as this can restrict breathing or cause discomfort.

Lietošanas instrukcijas

Apmācības režīmi

The PetJoy collar offers four training modes:

• Pīkstiena režīms: Delivers an audible tone. This is often used as a warning or positive reinforcement signal.
• Vibrācijas režīms: Delivers a non-harmful vibration. Intensity is adjustable from 1-100 levels.
• Šoka režīms: Delivers a static stimulation. Intensity is adjustable from 1-100 levels. Always start at the lowest level and increase gradually.
• Automātiskais režīms: The collar automatically detects and corrects barking. It has 5 sensitivity levels and a sequence of corrections (Beep, then Vibration, then Static Stimulation) if barking persists.

Image: Detailed activation sequences for the automatic bark detection mode.

Image: The collar's ability to operate in Auto Mode independently.

Controlling Multiple Dogs

The remote allows you to control up to three collars individually or all at once.

• Izmantojiet Kanāla poga on the remote to switch between Dog 1, Dog 2, Dog 3, or a universal channel to control all paired collars simultaneously.
• Ensure each collar is paired to a unique channel for individual control.

Image: Controlling multiple dogs with the remote.

Adjusting Sensitivity (Auto Mode)

To adjust the sensitivity of the automatic bark detection mode:

• With the receiver collar turned on, quickly press its power button 3 times.
• The LED indicator will flash a certain number of times to indicate the current sensitivity level (1-5 flashes).
• Continue pressing the power button 3 times in quick succession to cycle through the 5 sensitivity levels. Level 1 is the least sensitive, and Level 5 is the most sensitive.
• Select a sensitivity level appropriate for your dog's barking habits and environment.

Activating/Deactivating Auto Mode

You can turn the automatic bark detection mode on or off via the remote control.

• Ensure the remote and receiver are paired and within range.
• Press and hold the remote control's power button.
• You will hear the receiver beep once to confirm Auto Mode is turned ON, or twice to confirm it is turned OFF.

Apkope

Tīrīšana

• Regulāri tīriet uztvērēja kakla siksnu un kontaktpunktus ar reklāmu.amp audums.
• Ensure the contact points are free of dirt, debris, or corrosion.
• Neizmantojiet agresīvas ķīmiskas vielas vai abrazīvus tīrīšanas līdzekļus.

Akumulatora kopšana

• Pirms ilgstošas ​​neaktivitātes perioda ierīces pilnībā uzlādējiet.
• Uzglabāt vēsā, sausā vietā.
• Izvairieties no ekstremālām temperatūrām, kas var ietekmēt akumulatora darbības laiku.

Hidroizolācija

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in rainy conditions or during swimming.

Image: The collar's IPX7 waterproof capability.

Problēmu novēršana

Specifikācijas

Garantija un atbalsts

The PetJoy 3 Dog Shock Collar comes with a 2 gadu garantija no iegādes datuma, kas attiecas uz ražošanas defektiem un darbības traucējumiem normālas lietošanas laikā.

For detailed warranty information, technical support, or any inquiries, please refer to the official user guide or contact PetJoy customer service.

Oficiālā lietotāja rokasgrāmata (PDF): Lejupielādēt šeit

PetJoy Brand Store: Apmeklēt veikalu