Traxon Allegro XB36 Outdoor LED Wall Washer Flood Instruction Manual

1. Ievads

This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.

The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.

1. attēls: Priekšpuse view of the Traxon Allegro XB36 LED Wall Washer Flood Light.

2. Drošības informācija

• Elektrības apdraudējums: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
• Voltage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
• Zemējums: Pārliecinieties, vai armatūra ir pareizi iezemēta, lai novērstu elektriskās strāvas triecienu.
• Izmantošana ārpus telpām: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
• Temperatūra: Do not operate the fixture outside its specified ambient temperature range.
• Apstrāde: Handle the fixture with care. Avoid dropping or subjecting it to severe impact.
• Gaismas avots: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.

3. Iepakojuma saturs

Pēc izpakošanas pārliecinieties, vai visas sastāvdaļas ir savās vietās un nav bojātas:

• Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
• Mounting Bracket (pre-attached or separate)
• Lietošanas instrukcija (šis dokuments)

Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.

4. Iestatīšana un instalēšana

4.1 Armatūras uzstādīšana

1. Izvēlieties atrašanās vietu: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
2. Position Bracket: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
3. Drošs aprīkojums: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.

4.2 Elektriskais savienojums

The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.

2. attēls. Aizmugure view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.

1. Strāvas atslēgšana: Pirms jebkādu elektrisko savienojumu veikšanas izslēdziet galveno strāvas padevi ar ķēdes pārtraucēju.
2. Pievienojiet ievades jaudu: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
3. Daisy-Chaining (Optional): If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
4. Droši savienojumi: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.

3. attēls. Aizmugure view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.

Important: All wiring must comply with local electrical codes and regulations.

5. Lietošanas instrukcijas

1. Ieslēgšana: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
2. Blāva: The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
3. Stara leņķis: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
4. Pielāgošana: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.

6. Apkope

The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.

• Tīrīšana: Periodiski tīriet objektīvu un korpusu ar mīkstu,amp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners or solvents.
• Pārbaude: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
• Remonts: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.

7. Traucējummeklēšana

8. Specifikācijas

• Modelis: XB.W3.8370110
• Zīmols: Traxon
• Ievades apjomstage: 120 VAC
• Wattage: 44 vati
• Lumena jauda: 2631 lūmeni
• Krāsu temperatūra (CCT): 3000 tūkst
• Gaismas sadalījums: 7°
• Blāva: Phase Cut Dimmable
• IP vērtējums: IP66 (Outdoor Rated)
• Būvniecība: Aluminum/Glass
• Pabeigt: Melns
• Preces svars: 13.14 mārciņas (5.96 kg)
• Produkta izmēri: 9 x 5.3 x 11.3 collas (22.86 x 13.46 x 28.7 cm)
• Ražotājs: Osram

9. Informācija par garantiju

Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.

10. Atbalsts

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.