Sharkoon VK4 Rainbow ATX datora korpusa lietotāja rokasgrāmata

Ievads

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sharkoon VK4 Rainbow ATX PC Case. The VK4 Rainbow is designed with a minimalist exterior featuring a perforated front panel and includes four pre-installed 120mm fans with rainbow effect for optimal airflow. It offers ample space for large hardware components and supports radiators up to 360mm, alongside features for clean cable management.

1. attēls: Leņķis view of the Sharkoon VK4 Rainbow ATX PC Case, highlighting its perforated front and pre-installed rainbow fans.

Produkts beidziesview

The Sharkoon VK4 Rainbow ATX PC Case is engineered for efficient cooling and hardware compatibility. Key features include:

• Superior Cooling: Equipped with four pre-installed 120mm rainbow effect fans for excellent airflow. Additional fan mounting options are available.
• Ūdens dzesēšanas atbalsts: The front panel supports radiators up to 360mm, and the top panel accommodates radiators up to 280mm.
• Plašs interjers: Designed to house large components such as graphics cards up to 35cm, CPU coolers up to 16cm, and power supplies up to 21cm.
• Ample Uzglabāšana: Supports up to two 3.5" HDDs or four 2.5" SSDs.
• Ērta savienojamība: Top panel features two USB 3.0 ports and a TRRS port for easy access.
• Sakārtots interjers: Generous space for cable management and pre-installed dust filters at all air intake points for cleanliness.

Korpusa sastāvdaļas

2. attēls. Priekšpuse view with perforated panel and three 120mm rainbow fans.

3. attēls: sāni view šovsasing the tempered glass panel.

4. attēls. Aizmugure view with I/O shield area, expansion slots, and exhaust fan.

Figure 5: Top I/O panel with USB 3.0 ports and TRRS audio jack.

Uzstādīšana un uzstādīšana

Follow these steps to install your PC components into the Sharkoon VK4 Rainbow case.

1. Prepare the Case

1. Uzmanīgi izpakojiet kasti un noņemiet visus iepakojuma materiālus.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling it open.
3. Remove the opposite metal side panel to access the cable management area.

Figure 6: Internal layout of the VK4 Rainbow case, ready for component installation.

2. Mātesplates uzstādīšana

• The VK4 Rainbow supports Mini-ITX, Micro-ATX, and ATX motherboards.
• Uzstādiet I/O aizsargu korpusa aizmugurē esošajā izgriezumā.
• Align your motherboard with the pre-installed standoffs and secure it with screws. Ensure all standoffs are used for proper support.

3. Barošanas bloka (PSU) uzstādīšana

• Install the PSU into the dedicated compartment at the bottom rear of the case.
• Piestipriniet barošanas bloku ar skrūvēm no korpusa aizmugures.

4. Krātuves diska instalēšana

• Korpuss atbalsta līdz diviem 3.5 collu cietajiem diskiem vai četriem 2.5 collu SSD diskiem.
• Mount 3.5" HDDs in the drive cage located under the PSU shroud.
• Mount 2.5" SSDs on the dedicated mounting points behind the motherboard tray or on top of the PSU shroud.

5. Grafikas kartes un paplašināšanas kartes uzstādīšana

• Noņemiet nepieciešamos paplašināšanas slotu pārsegus korpusa aizmugurē.
• Insert your graphics card or other expansion cards into the PCIe slots on your motherboard and secure them with screws.

6. Kabeļu vadība

Izmantojiet kabeļu vadīšanas izgriezumus un nostiprināšanas punktus aiz mātesplates paliktņa, lai sakārtotu kabeļus. Tas uzlabo gaisa cirkulāciju un estētiku.

Figure 7: Cable management area behind the motherboard tray.

Darbība

Priekšējā paneļa savienojamība

The top panel of the VK4 Rainbow case provides convenient access to essential ports:

• 2x USB 3.0 porti: Ātrdarbīgai datu pārsūtīšanai ar saderīgām ierīcēm.
• 1x TRRS Port: A combined audio jack for headsets with a single 3.5mm plug (microphone and audio).
• Barošanas poga: To turn your system on/off.
• Atiestatīšanas poga: Lai restartētu sistēmu.

Ventilatora darbība

The four pre-installed 120mm rainbow effect fans are connected via Molex connectors. Due to this connection type, the fans operate at a constant speed and their speed cannot be adjusted via the motherboard. This ensures consistent airflow but may result in a noticeable fan noise level.

Apkope

Regulāra apkope palīdz nodrošināt datora komponentu optimālu veiktspēju un ilgmūžību.

Putekļu filtra tīrīšana

• The VK4 Rainbow features pre-installed dust filters at all air intake points (front, top, and bottom).
• Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling.
• Filters can typically be cleaned with compressed air or by rinsing with water and allowing them to dry completely before reinstallation.

Vispārējā tīrīšana

• Use a soft, dry cloth to wipe down the exterior surfaces of the case.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid streaks.
• Ensure the system is powered off and unplugged before performing any cleaning inside the case.

Problēmu novēršana

Šajā sadaļā ir aplūkotas bieži sastopamas problēmas, ar kurām jūs varētu saskarties.

• High Fan Noise: The pre-installed fans are connected via Molex and operate at a constant speed. If fan noise is a concern, consider replacing the fans with PWM-controlled alternatives that can be regulated by your motherboard.
• Slikta gaisa plūsma/pārkaršana:
  • Check if dust filters are clean and not obstructed.
  • Pārliecinieties, vai visi korpusa ventilatori griežas pareizi.
  • Verify that cables are neatly managed and not blocking airflow paths.
• Grūtības ar kabeļa pārvaldību: While the case offers space, complex builds with many components may require careful planning. Utilize cable ties and routing channels effectively.
• Priekšējā paneļa porti nedarbojas:
  • Ensure the front panel connectors (USB 3.0, audio, power, reset) are correctly plugged into the motherboard headers.
  • Pareizu kontaktu izvietojumu skatiet savas mātesplates rokasgrāmatā.

Specifikācijas

Garantija un atbalsts

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon website. If you require technical assistance or have questions not covered in this manual, please contact Sharkoon customer support through their official channels.

Ražotājs: Sharkoon Technologies GmbH

Webvietne: www.sharkoon.com