AVATTO viedā pirkstu nospiedumu durvju slēdzenes cilindra 60 mm (30/30) lietotāja rokasgrāmata

1. Ievads

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your AVATTO Smart Fingerprint Door Lock Cylinder (Model SDL-S1-B60). Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Drošības informācija

• Pirms uzstādīšanas pārliecinieties, vai visas sastāvdaļas ir klāt un nav bojātas.
• Do not attempt to disassemble or modify the lock cylinder, as this may void the warranty and compromise security.
• Use only the specified 1.5V alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe place outside the property.
• Protect the fingerprint sensor from sharp objects or excessive force.
• This lock is designed for indoor use. Avoid exposure to extreme weather conditions.

3. Iepakojuma saturs

Pārliecinieties, vai jūsu iepakojumā ir iekļauti visi tālāk norādītie priekšmeti:

• 1 x AVATTO Smart Door Lock Cylinder (60mm)
• 2x mehāniskās atslēgas
• 3 x RFID kartes
• 1 x Skrūvgriezis
• 1 x User Manual (German, refer to this document for English instructions)

4. Uzstādīšana

4.1. Pārbaudes pirms uzstādīšanas

Before proceeding with installation, ensure your door and existing lock cylinder are compatible:

• Cilindra tips: Confirm your existing cylinder type is compatible. This smart lock is designed to replace standard European profile cilindri.
• Cylinder Hole Size: Measure the dimensions of your door's lock cylinder hole. The required dimensions are approximately 20mm diameter, 35mm height, and 10mm width.
• Durvju biezums: This lock is suitable for doors with a thickness between 60mm and 85mm.

4.2 Cylinder Dimensions

The smart lock cylinder has the following dimensions:

4.3. Uzstādīšanas soļi

1. Remove Existing Cylinder: Unscrew the retaining screw on the side of your door that holds the current lock cylinder in place. Insert your key and turn it slightly (about 15-20 degrees) to align the cam, then pull the cylinder out.
2. Adjust Inner Cylinder Length: The inner cylinder length is adjustable from 30mm to 55mm. Adjust it to match the inner side of your door. The outer cylinder length is fixed at 30mm.
3. Insert Smart Lock Cylinder: Insert the AVATTO Smart Lock Cylinder into the door's cylinder hole. Ensure it fits snugly and the outer fingerprint module is correctly oriented.
4. Nostipriniet cilindru: Re-insert and tighten the retaining screw on the side of the door to secure the smart lock cylinder.
5. Bateriju uzstādīšana: Open the battery compartment on the inner side of the lock. Insert 3 x 1.5V alkaline batteries (CR123A type recommended, not included). Ensure correct polarity.
6. Testa funkcionalitāte: Before closing the door, test the mechanical key and the inner knob to ensure smooth operation.

Installation typically takes about 10 minutes using a hex screwdriver (provided).

5. Iestatīšana

5.1 Smart Life lietotnes savienojums

1. Lejupielādēt lietotni: Download the "Smart Life" application from your smartphone's app store (iOS or Android).
2. Reģistrēties/Pieslēgties: Izveidojiet kontu vai piesakieties savā esošajā Smart Life kontā.
3. Pievienot ierīci: In the app, tap '+' to add a new device. Select 'Security & Video Surveillance' > 'Smart Lock' or search for 'AVATTO Smart Lock'.
4. Savienošana pārī, izmantojot Bluetooth: Ensure your phone's Bluetooth is enabled. The app will guide you through the pairing process. The lock uses Bluetooth protocol with an effective transmission range of 50 meters.
5. Tālvadības pults (pēc izvēles): For remote control functionality outside the Bluetooth range (e.g., from office or on the go), an AVATTO Bluetooth Gateway (sold separately) is required. Connect the gateway to your home Wi-Fi and link it to the lock via the Smart Life app.

5.2 Lietotāju pievienošana un metožu atbloķēšana

Through the Smart Life app, you can manage various unlocking methods:

• Pirkstu nospiedumu reģistrācija: Follow the in-app instructions to register fingerprints. You will typically need to place your finger on the sensor multiple times from different angles.
• RFID Card Registration: In the app, select to add an RFID card, then present the RFID card to the lock's sensor as instructed.
• Lietotāju pārvaldība: Add new users, assign specific unlocking methods (fingerprint, RFID, app), and set administration permissions.

6. Lietošanas instrukcijas

6.1. Atbloķēšana

• Pirkstu nospiedumu atbloķēšana: Novietojiet reģistrēto pirkstu uz pirkstu nospiedumu sensora. Slēdzene tiks atbloķēta, ja pirkstu nospiedums tiks atpazīts.
• RFID kartes atbloķēšana: Present a registered RFID card to the lock's sensor. The lock will unlock upon recognition.
• Smart Life App Unlock: Open the Smart Life app, select your lock, and tap the unlock button. This works via Bluetooth or remotely if a gateway is connected.
• Mehāniskās atslēgas atbloķēšana: Insert one of the provided mechanical keys into the keyhole and turn to unlock the door.

6.2 Bloķēšana

• Automātiskā bloķēšana: The lock may be configured for automatic locking after a set period.
• Manuāla bloķēšana: From the inside, turn the knob to lock the door. From the outside, the lock will automatically engage after closing, or you can manually lock it via the app.

7. Apkope

7.1. Akumulatora pārvaldība

The lock requires 3 x 1.5V alkaline batteries. Batteries are not included.

• Akumulatora statuss: You can check the battery level through the Smart Life app interface.
• Brīdinājums par zemu akumulatora uzlādes līmeni: The lock will provide an indication (e.g., sound or light) when batteries are low. Replace them promptly.
• Akumulatora nomaiņa: When replacing batteries, ensure the lock is in an unlocked state if possible. Open the battery compartment, remove old batteries, and insert new ones with correct polarity.

7.2 Emergency Unlock

In case of completely drained batteries, you can still access your property:

• Mehāniskā atslēga: Use one of the provided mechanical keys to unlock the door.
• Ārējā jauda: The lock features a USB port for emergency power. Connect a portable power bank to the USB port to temporarily power the lock and unlock it using a registered fingerprint, RFID card, or the app.

8. Traucējummeklēšana

• Slēdzene nereaģē: Check battery level. Replace batteries if low. Ensure the lock is properly installed and not obstructed.
• Pirkstu nospiedums nav atpazīts: Pārliecinieties, vai jūsu pirksts ir tīrs un sauss. Mēģiniet atkārtoti reģistrēt savu pirkstu nospiedumu lietotnē.
• RFID karte nedarbojas: Ensure the card is registered. Try re-registering the card.
• Lietotnes savienojuma problēmas: Ensure Bluetooth is enabled on your phone. If using remote control, check the AVATTO Bluetooth Gateway's connection to Wi-Fi and the lock. Restart the app or your phone.
• Motor sounds but latch doesn't move: This could indicate an obstruction or incorrect installation. Recheck the cylinder's alignment and ensure no parts are binding.
• Lock is unresponsive after battery change: Ensure batteries are inserted with correct polarity. If issues persist, contact support.

9. Specifikācijas

10. Garantija un atbalsts

For warranty information and technical support, please refer to the documentation provided with your purchase or contact AVATTO customer service through their official website or the retailer where the product was purchased. Please have your model number (SDL-S1-B60) and purchase details ready when contacting support.