GOOLOO A5 and A3 Jump Starter with Air Compressor Instruction Manual

1. Produkts beidziesview

The GOOLOO A5 and A3 Jump Starter with Air Compressor are versatile 4-in-1 devices designed for automotive emergencies and daily convenience. They combine a powerful jump starter, a high-capacity tire inflator, a robust power bank, and a bright LED light into a single, portable unit. These devices are engineered for reliability and ease of use in various conditions.

2. Drošības informācija

Your GOOLOO Jump Starter is equipped with 10 smart safety protections to ensure safe operation. Always read and understand all safety instructions before use.

• Aizsardzība pret pārmaksu: Novērš akumulatora bojājumus pārmērīgas uzlādes dēļ.
• Aizsardzība pret pārstrāvu: Aizsardzība pret pārmērīgu strāvas plūsmu.
• Aizsardzība pret īssavienojumu: Automātiski izslēdzas īssavienojuma gadījumā.
• Apgrieztās polaritātes aizsardzība: Alerts and prevents damage from incorrect clamp savienojums.
• AI Software Protection: Intelligent software monitors and manages device performance.
• Aizsardzība pret augstu un zemu temperatūru: Operates safely within a wide temperature range (-4°F to 140°F).
• Aizsardzība pret dzirkstelēm: Izstrādāts, lai novērstu dzirksteļu veidošanos savienojuma laikā.
• Over-Voltage Aizsardzība: Aizsargā pret tilpumutage pārspriegumi.
• Pārslodzes aizsardzība: Novērš bojājumus pārmērīgas slodzes dēļ.
• Apgrieztās iekasēšanas aizsardzība: Prevents current from flowing back into the jump starter.

Vispārīgi drošības pasākumi:

• Neiegremdējiet ierīci ūdenī.
• Neizjauciet ierīci.
• Uzglabāt bērniem nepieejamā vietā.
• Use only specified accessories and chargers.

3. Iepakojuma saturs

Pārliecinieties, ka, izsaiņojot iepakojumu, ir visas sastāvdaļas:

• GOOLOO A5/A3 Jump Starter Unit
• Viedie džemperu kabeļi
• Gaisa šļūtene
• Dažādi uzgaļu adapteri (bumbām, velosipēdiem utt.)
• USB-C uzlādes kabelis
• Pārnēsāšanas soma
• Lietotāja rokasgrāmata

4. Produkta īpašības

4.1. Palaišanas palaišanas funkcija

The GOOLOO A5 delivers up to 4000A peak current, capable of restarting most 12V vehicles (up to all gas / 10.0L diesel engines). The A3 model provides 3000A peak current for up to all gas / 9.0L diesel engines. Both models feature a BOOST function for deeply discharged or near-dead batteries. Operating temperature range is -4°F to 140°F.

Image: The GOOLOO A5 Jump Starter connected to a car battery, demonstrating the jump-starting capability. The unit displays battery status and current readings.

4.2. Riepu piepūšanas funkcija

Equipped with a high-efficiency motor, the A5 can inflate tires up to 160 PSI, featuring a 25mm cylinder for faster inflation. The A3 inflates up to 150 PSI. It can inflate a 285/70 R17 pickup tire from 30 PSI to 36 PSI in approximately 2 minutes (A5), or a 195/65 R15 sedan tire from 30 PSI to 36 PSI in 30 seconds (A5). Suitable for full-size pickups, light trucks, SUVs, cars, motorcycles, and bicycles, as well as balls and small inflatables.

Image: The GOOLOO A5 Jump Starter connected to a large vehicle tire, actively inflating it. The display shows the PSI reading and battery level.

4.3. Power bankas funkcija

The unit features a 20,000mAh rated capacity. The A5 includes a built-in 45W USB-C output cable for charging devices like phones and tablets. One full charge supports up to 50 engine starts, 50 minutes of continuous inflation, or multiple device top-ups.

Image: The GOOLOO A5 Jump Starter charging a smartphone using its integrated 45W USB-C cable. The device's display is visible.

4.4. LED gaismas funkcija

A 400-lumen LED flashlight provides illumination with multiple modes: steady lighting, strobe, and SOS. The light can operate for up to 99 hours depending on the mode.

Image: The GOOLOO A5 Jump Starter's 400-lumen LED flashlight is shown illuminating a tire in a dark setting, highlighting its utility as a work light or emergency signal.

4.5. Sunlight-Readable Display

The device features a color LED display with a rotating status ring, offering 2000-nit brightness for clear readability even in direct sunlight. It tracks inflation in real-time.

Image: The GOOLOO A5 Jump Starter's display showing a 20,000mAh battery capacity and various usage statistics like engine starts, tire charges, phone charges, and lighting hours.

5. Iestatīšana

5.1. Ierīces uzlāde

Before first use, fully charge your GOOLOO Jump Starter. Connect the provided USB-C charging cable to the device's input port and to a suitable USB power adapter (not included). The display will indicate charging progress. A full charge supports numerous operations.

6. Lietošanas instrukcijas

6.1. Transportlīdzekļa iedarbināšana, izmantojot palīgierīci

1. Pārliecinieties, vai palaišanas palaišanas ierīce ir pietiekami uzlādēta.
2. Plug the smart jumper cables into the jump starter's dedicated port.
3. Pievienojiet sarkano (+) klamp to the vehicle's positive battery terminal.
4. Pievienojiet melno (-) klamp to the vehicle's negative battery terminal.
5. Check the indicator lights on the smart jumper cables for a correct connection (usually a solid green light). If the battery is extremely low, press the 'BOOST' button on the jumper cable adapter for an extra surge.
6. Iedarbiniet transportlīdzekļa dzinēju.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter unit.

Image: The GOOLOO A3 Jump Starter connected to a car battery in an engine bay, illustrating the proper setup for jump-starting a vehicle.

6.2. Riepu piepūšana

1. Connect the air hose to the jump starter's air output port.
2. Attach the air hose nozzle securely to the tire's valve stem.
3. Turn on the jump starter unit. The display will show the current tire pressure.
4. Use the mode button to select the desired pressure unit (PSI, BAR, KPA).
5. Use the '+' and '-' buttons to set your target tire pressure.
6. Press the start button to begin inflation. The unit will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the jump starter.

Image: The GOOLOO A3 Jump Starter actively inflating a tire, with the digital display showing the current pressure.

6.3. Lietošana kā pārnēsājamais akumulators

1. Connect your electronic device (smartphone, tablet, etc.) to the USB-A or USB-C output ports on the jump starter using an appropriate charging cable.
2. Ierīce sāks automātiski uzlādēties.

6.4. LED gaismas izmantošana

1. Press and hold the light button (usually integrated with the power button) for 2-3 seconds to turn on the steady LED light.
2. Press the light button again to cycle through strobe mode.
3. Press the light button a third time for SOS mode.
4. Press the light button a fourth time to turn off the light.

Image: The GOOLOO A3 Jump Starter's LED flashlight is shown illuminating a dark outdoor area, demonstrating its utility for visibility and emergencies.

7. Apkope

• Turiet ierīci tīru un tīru no putekļiem un gružiem.
• Uzglabājiet ierīci vēsā, sausā vietā, pasargājot to no tiešiem saules stariem un ekstremālām temperatūrām.
• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.

8. Traucējummeklēšana

• Ierīce neieslēdzas: Ensure the device is charged. If fully charged, contact support.
• Transportlīdzeklis neiedarbojas: Check that jumper cables are correctly connected (red to +, black to -). Ensure the jump starter is fully charged. If the battery is deeply discharged, use the BOOST function.
• Tire not inflating: Check that the air hose is securely connected to both the unit and the tire valve. Ensure the target pressure is set correctly.
• Pārkaršanas aizsardzība ir aktivizēta: If the device becomes too hot during prolonged use (e.g., multiple jump starts or extended inflation), it may enter overheat protection mode. Allow the unit to cool down before resuming operation.

9. Specifikācijas

10. Garantija un atbalsts

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product's packaging or visit the official GOOLOO webvietne.