Commend 200 Series Intercom System
Informācija par produktu
Specifikācijas
- Model: Master Station Series
- Compatible with: GE 100, GE 200, GE 700 intercom centrals
- Series Available: 200, 400, 411
Apraksts
Svarīgi piesardzības pasākumi
- Lūdzu, glabājiet šo aprakstu drošā vietā!
- Pielietojuma diapazons: As stations for the intercom centrals GE 100 (only series 400 and 411), GE 200 and GE 700.
- Uzmanību:
- Never push objects of any kind into the station through loudspeaker or microphone slots.
- Ensure no liquid enters the housing.
- The station may be opened only by authorized service engineers.
- Izvairieties no stacijas nomešanas.
- Do not expose the station to extreme temperatures.
- Tīrīšana:
- Tīrīšanai izmantojiet mīkstu, neplūksnu drānu.
- Remove stubborn stains with a cloth lightly dampened with a mild detergent solvent.
- Tīrīšanai nekad nelietojiet spēcīgus šķīdinātājus, abrazīvus tīrīšanas līdzekļus vai saspiestu gaisu.
- Savienojums:
- Pievienojiet staciju tikai iepriekš noteiktām kontaktligzdām, nekad telefona vai datora kontaktligzdām.
- Izmantojiet tikai komplektā iekļauto savienotāja kabeli.
- Nekad nepievienojiet domofona stacijas kontaktligzdām citas iekārtas.
Lietošanas instrukcijas
Zvanīt
- Dial the desired calling number.
- Talk after the Dial Tone.
- Cancel the call: X
Klausules funkcija
- For private conversations (only EE 411, EE 420, EE 211, EE 220): Hold the loudspeaker grill to the ear.
Runas virziena kontrole
- Calls to noisy rooms may require manual control of the speech direction (Simplex).
- Talk: keep T nospiests.
- Listen: release T.
Zvanītais numurs ir aizņemts
- Wait for automatic re-call (Busy Tone can be switched off with 0, or Intrude with T (keep button pressed while talking)).
Send Re-call Request *
- Called subscriber is busy, in privacy mode or does not answer.
- Send re-call request: 5 – Call is cancelled automatically.
- Delete re-call request: call subscriber once again, 6 – Call is cancelled automatically.
Receive Re-call Request *
- The number of the station that has called is indicated blinking in the display, the Conversation Lamp mirgo.
- Answer re-call request:
F or dial the calling number (stations without function keys can also answer with 5T) – Call is set up, re-call request is cancelled automatically. - Cancel re-call request without answer: press X for at least one second.
Minute Tone
- Single Minute Tone: a call is running.
- Double Minute Tone: a call is holding for you or your conversation partner.
- Triple Minute Tone: the conversation time expires in a few seconds, but you can extend it with 77.
Inquiry *
- 0 – Tone Signal is heard.
- Dial the desired number – Talk after the Dial Tone.
- X: another number can be dialed, or X once more: back to previous conversation partner.
Transfer *
- 0 – Tone Signal is heard.
- Dial the desired number – Talk after the Dial Tone.
- Connect your conversation partner with your previous conversation partner: 0
Mikrofona izslēgšana
- During a running call: With 7 the call can be disconnected temporarily – the waiting subscriber receives a Tone Signal (Privacy Tone) and the Conversation Lamp mirgo.
- Reconnect the call with 7.
Visi zvani/grupas zvans ar atbildi
- Initiate All Call with 00 (Group Calls with 010 to 019, depending on the programming) – Talk after Gong Signal, as soon as Conversation Lamp gaismas.
- Terminate announcement: T wait for answer, or X cancel call without answer.
- Answer All Call/Group Call with TT.
Sekretāra pārcelšana
- Activate with 02 and the calling number of your secretary station – Acknowledgement Tone (EE 411/EE 211 can be turned to the side for activation).
- Deactivate with 030 – Continuous Tone (or turn back station).
Durvju Atvērējs
- During running call with the Door Station: Open the door with 1.
Seko Man
- Only EE 411, EE 211.
- Own station: turn to the side to activate.
- Target station: 02 and your own calling number – Acknowledgement Tone.
- Deactivate: turn back your own station.
Conference *
- During a running call: Invite further participants: – 8 – Tone Signal is heard – Dial the desired number – Talk after the Dial Tone.
- Repeat for each participant.
- Start the conference: 8T.
- Participant who wants to talk: T.
- Terminate the conference: X.
Privātums
- Activate: 031 – Acknowledgement Tone (EE 411/ EE 211 can be turned to the side for activation).
- Answer call: any button (or turn back station).
- Deactivate: 030 – Continuous Tone (or turn back station).
Atkārtoti savienot pēdējo zvanu
- 0T – Talk after the Dial Tone.
Fona mūzika
- Switch on: 4T1 (up to 4T8 with several music programs).
- Switch off: 4T0.
Displeja informācija
- Nav piemērots EE 400, EF 400, EE 470.
- Different functions depending on central type and programming, but in general:
- Idle Mode: If no call is running the own calling number is displayed, e.g.:
- Conversation: During a conversation the calling number/name of the conversation partner is displayed, e.g.:
- Waiting subscriber: A busy subscriber called by another station gets the following indication:
- Divkāršās minūtes tonis
- Displejā mirgo gaidīšanas stacijas numurs.
- Afterwards the conversation partner is indicated again
- Privātuma funkcija: Aktivizētā privātuma funkcija tiek norādīta displejā, piemēram:
- During an activated Call Transfer (e.g. Secretary Transfer) the target of the transfer is indicated, e.g.:
- Displeja tekstus var brīvi programmēt, piemēram:
Toņu signāli
Apjoms
- During a conversation the volume can be adjusted with
.
FileB_400DE.CHP
Versija: 1.4 / 1100
Tips: D-BA-400DE
This equipment fulfills the requirements of the EU-standard 89/336/EWG (Electromagnetic Interferences, EN 55022/50082-1). Therefore, this station is CE-labelled.
The features depend on the type of subscriber card, the software version, and the programming.
* For central GE 100 available from software Pro 03
FAQ
Kā veikt zvanu?
Dial the desired calling number and talk after hearing the Dial Tone. To cancel the call, press X.
Dokumenti / Resursi
 |
Commend 200 Series Intercom System [pdfLietošanas instrukcija 400 Series, 411, 200 Series Intercom System, 200 Series, Intercom System |