DeepCool AK400 procesora dzesētājs ar statusa displeju

Specifikācijas

• Modelis: DeepCool AK400 Digital CPU Cooler
• Socket savietojamība
  • Intel: LGA 1150/1151/1155/1156/1200/1700
  • AMD: AM4/AM5
• Cooling Capacity (TDP): līdz 220W
• Siltuma caurules: 4 x 6mm direct-touch copper heat pipes
• Ventilators:
  • Izmērs: 120 mm x 120 mm x 25 mm
  • Tips: Fluid Dynamic Bearing (FDB)
  • Ātrums500–1850 apgr./min ±10%
  • Gaisa plūsma: Up to 68.99 CFM
  • Trokšņa līmenis: ≤28 dB(A)
  • Savienotājs: 4-pin PWM
  • Rated Voltage: 12V DC
  • Enerģijas patēriņš: 1.44W
• LED apgaismojums: Addressable RGB
• Savienotāji: 3-pin (+5V-D-G) and 9-pin USB 2.0
• Izmēri:
  • Kopumā: 126 mm (garums) x 97 mm (platums) x 156 mm (augstums)
  • Radiators: 120 mm (garums) x 60 mm (platums) x 152 mm (augstums)
• Svars: aptuveni 695g

Montāžas un uzstādīšanas instrukcijas

Nepieciešamie instrumenti

• Phillips skrūvgriezis
• Termiskā pasta (ja tā nav iepriekš uzklāta)
• Cleaning cloth or isopropyl alcohol (for CPU surface prep)

Step 1: Prepare the Motherboard

• Power off your PC and unplug all cables.
• Remove the existing CPU cooler if applicable.
• Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.

2. darbība. Uzstādiet aizmugures plāksni

• Place the provided motherboard backplate on the rear side of the motherboard.
• Align the holes of the backplate with the CPU socket mounting holes.

Step 3: Attach Standoffs

• Insert the standoffs through the motherboard aligned with the backplate.
• Tighten the standoffs gently; they will hold the cooler firmly in place.

Step 4: Apply Thermal Paste

• Uzklājiet nelielu zirņa lieluma daudzumu termopastas centrālā procesora centrā.
• If your AK400 cooler comes with pre-applied thermal paste, skip this step.

Step 5: Mount the Cooler

• Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
• Carefully place the cooler onto the CPU and press gently.
• Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.

Step 6: Attach the Fan

• Attach the fan to the heatsink using the included clips or screws.
• Ensure the airflow direction is correct (usually indicated by arrows on the fan).

Step 7: Connect the Fan & Display

• Plug the fan power cable into the CPU_FAN header on the motherboard.
• Connect the status display cable to the appropriate motherboard or power header as specified in the manual.

8. darbība. Pēdējās pārbaudes

• Double-check that all screws are tight and the cooler is secure.
• Ensure cables are connected and not obstructing the fan.
• Close the PC case and reconnect the power.

Step 9: Power On & Monitor

• Turn on your PC and check the status display for proper operation.
• Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.

Padomi

• Handle the cooler carefully; the display panel can be fragile.
• Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
• Make sure airflow is not blocked by other components.

1. After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, webvietne.www.deepcool.com/downloadpage/
2. Operētājsistēmas versijas prasības: Windows 10/Windows 11

FAQ

How do I install the AK400 Digital?

The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.

Vai es varu pielāgot RGB apgaismojumu?

Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.

Dokumenti / Resursi

DeepCool AK400 procesora dzesētājs ar statusa displeju [pdfLietotāja rokasgrāmata AK400 CPU dzesētājs ar statusa displeju, AK400, CPU dzesētājs ar statusa displeju, Statusa displejs, Displejs

Atsauces

• Lietotāja rokasgrāmata