DELL Command Configure Software User Manual

piezīmes, brīdinājumus un brīdinājumus

PIEZĪME: PIEZĪME norāda svarīgu informāciju, kas palīdz labāk izmantot jūsu produktu.

UZMANĪBU: UZMANĪBU norāda vai nu aparatūras bojājumus, vai datu zudumus, un norāda, kā izvairīties no problēmas.

BRĪDINĀJUMS: BRĪDINĀJUMS norāda uz iespējamu īpašuma bojājumu, miesas bojājumu vai nāvi.

© 2025 Dell Inc. vai tā meitasuzņēmumi. Visas tiesības paturētas. Dell Technologies, Dell un citas preču zīmes ir Dell Inc. vai tā meitasuzņēmumu preču zīmes. Citas preču zīmes var būt to attiecīgo īpašnieku preču zīmes.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

PIEZĪME: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Dell komanda | Konfigurējot 4.10.1 vai jaunāku versiju, tiek ģenerēts 64 bitu SCE ar ierobežojumiem.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Tēmas:

• Versija
• Paredzētā auditorija
• Dokumenta mērķis

Versija

Šajā nodaļā ir sniegts pārskatsview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Windows pirmsinstalēšanas vide (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

1. tabula. Versiju matrica

PIEZĪME: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Paredzētā auditorija

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Dokumenta mērķis

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Piekļuve Dell Command | Konfigurēt instalētāju

Dell komanda | Konfigurēt instalāciju file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Dodieties uz Atbalsts | Dell.
2. Zem Ar kādu produktu mēs varam jums palīdzēt, ievadiet Serviss Tag atbalstītās Dell ierīces un noklikšķiniet uz Iesniegtvai noklikšķiniet uz Atklājiet personālo datoru.
3. Dell ierīces produktu atbalsta lapā noklikšķiniet uz Draiveri un lejupielādes.
4. Noklikšķiniet Manuāli atrodiet konkrētu draiveri tev [modelis].
5. Pārbaudiet Sistēmas pārvaldība izvēles rūtiņa zem Kategorija nolaižamajā izvēlnē.
6. Atrodiet Dell komanda | Konfigurēt in list and select Lejupielādēt lapas labajā pusē.
7. Atrodiet lejupielādēto file savā datorā (pārlūkā Google Chrome, file parādās Chrome loga apakšā), un palaidiet izpildāmo failu file.
8. Izpildiet ekrānā redzamos norādījumus.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Tēmas:

• Atbalstītās operētājsistēmas operētājsistēmai Windows
  
• Atbalstītās platformas
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Atbalstītās operētājsistēmas operētājsistēmai Windows

2. tabula. Atbalstītās operētājsistēmas

Atbalstītās platformas

Table 3. Supported platforms

Table 3. Supported platforms (continued)

PIEZĪME: Platforms must support WMI-ACPI BIOS for full functionality.

PIEZĪME: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

PIEZĪME: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

PIEZĪME: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Priekšnoteikumi

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

PIEZĪME:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Ieslēdziet vai izslēdziet Windows funkcijas ekrāns.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Veiciet dubultklikšķi uz lejupielādētā DUP, noklikšķiniet uz Jā un pēc tam noklikšķiniet uz INSTALL.
   Dell komanda | Tiek parādīts konfigurācijas instalēšanas vednis.
2. Palaidiet instalēšanas vedni.
   Papildinformāciju skatiet sadaļā Instalēšanas vedņa palaišana.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Palaidiet šādu komandu:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Veiciet dubultklikšķi uz lejupielādētās Dell Update Package (DUP) un noklikšķiniet uz Jā.
2. Noklikšķiniet uz IZSTRĀDĀT.
   Tiek parādīts logs Pārlūkot mapi.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Uz view ekstrahētais files, noklikšķiniet View Mape.
   Mapē ir ietverts sekojošais files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Lai piekļūtu Dell komandai | Konfigurācijas instalēšanas vednis, veiciet dubultklikšķi uz Command_Configure.msi.
6. Palaidiet instalēšanas vedni.
   Papildinformāciju skatiet sadaļā Instalēšanas vedņa palaišana.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Instalēšanas vedņa palaišana

To run the installation wizard for installing the Dell Command | Configure .msi file jūsu ierīcē:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Tiek parādīts instalēšanas vednis.
3.  Noklikšķiniet uz Tālāk.
   Tiek parādīts Licences līguma ekrāns.
4. Izlasiet licences līgumu un noklikšķiniet uz Es piekrītu licences līguma noteikumiem, un pēc tam noklikšķiniet uz Tālāk.
   Tiek parādīts klienta informācijas ekrāns.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Tiek parādīts pielāgotās iestatīšanas ekrāns.
6. Noklikšķiniet uz Tālāk, lai instalētu Dell Command | Konfigurējiet CLI un GUI noklusējuma direktorijā. Noklusējuma Dell Command | Konfigurēt instalācijas direktorijus ir:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   Tiek parādīts ekrāns Gatavs programmas instalēšanai.
7. Noklikšķiniet uz Jā.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Noklikšķiniet uz Pabeigt.
   Ja Dell komanda | Konfigurēt GUI ir veiksmīgi instalēts, uz darbvirsmas tiek parādīta GUI saīsne.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

PIEZĪME: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

PIEZĪME: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Dodieties uz mapi, kurā atrodas Dell Command | Konfigurācijas instalēšanas programma ir iegūta no Dell atjaunināšanas pakotnes (DUP).
2. Open Command Prompt as administrator.
3. Palaidiet šādu komandu: msiexec.exe /i Command_Configure.msi /qn
   Dell komanda | Konfigurācijas komponenti tiek klusi instalēti šādās vietās:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Instalēšana ar atbalstītajām valodām

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Ķīnas Taivāna
• 1031 — vācu
• 1033 — angļu valoda
• 1034 — spāņu
• 1036 — franču valoda
• 1040 — itāļu
• 1041 — japāņu
• 1043 — holandiešu valoda
• 2052. gads — vienkāršotā ķīniešu valoda
• 3076 — Ķīnas Honkonga

PIEZĪME: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Atveriet Vadības panelis.
2. Dodieties uz Programmas > Programmas un funkcijas.
3. Find Dell Command | Configure sarakstā.
4. Right-click it and select Atinstalēt.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

PIEZĪME: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

PIEZĪME: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

PIEZĪME: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

PIEZĪME: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Veiciet tālāk norādītās darbības, lai jauninātu Dell Command | Konfigurējiet (iepriekš Dell Client Configuration Toolkit) uz nākamo versiju:

1. Double-click the downloaded DUP, and then click UZSTĀDĪT.
   Dell komanda | Tiek palaists konfigurācijas instalēšanas vednis.
2. Palaidiet instalēšanas vedni un izpildiet ekrānā redzamos norādījumus.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Lejupielādējiet jaunāko instalāciju file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the fileun pēc tam palaidiet šādu komandu:
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   PIEZĪME: Tiek parādīts instalēšanas vedņa ekrāns, kam seko “Vecāka Dell Command versija | Šajā sistēmā ir noteikta konfigurācija. Ja turpināsiet, instalētājs noņems vecāku versiju un turpinās instalēt jaunāko versiju. Ja atcelsiet jaunākās versijas instalēšanu, sistēma netiks atjaunota uz iepriekšējo Dell Command | Konfigurēt. Vai vēlaties turpināt?" ziņa.
3. Lai jauninātu, izpildiet ekrānā redzamos norādījumus.
   PIEZĪME: Lai veiktu klusu jaunināšanu, palaidiet šādu komandu: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Jaunināšana noklusējuma mapē

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Pārlūkojiet līdz mapei, kurā esat izvilcis Dell Command | Konfigurējiet instalētāju no Dell atjaunināšanas pakotnes (DUP).
2. Palaidiet šādu komandu: msiexec.exe /i Command_Configure.msi /qn
   Dell komanda | Konfigurācijas komponenti tiek klusi instalēti šādās vietās:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Tēmas:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

4. tabula. Atbalstītās operētājsistēmas

Supported Platforms for Linux

Table 5. Supported platforms

PIEZĪME: Platforms must support WMI-ACPI BIOS for full functionality.

PIEZĪME: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

PIEZĪME:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. PIEZĪME:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Noklusējuma instalācijas ceļš ir /opt/dell/dcc.

Priekšnoteikumi

• Darbstacijai jādarbojas atbalstītā Linux operētājsistēmā.
• Lejupielādējiet openSSL 1.x bibliotēkas, lai instalētu un palaistu Dell Command | Konfigurējiet operētājsistēmā Red Hat Enterprise Linux 8 un Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. No dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar the file izmantojot šādu komandu:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar the file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Versija>_ .tar.gz satur šādas pakotnes, kas jāinstalē šādā secībā:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   PIEZĪME: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f instalēt
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Noklusējuma instalācijas ceļš ir /opt/dell/dcc.
   PIEZĪME: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f instalēt

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

PIEZĪME: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Lai atinstalētu Dell Command | Konfigurējiet sistēmās, kurās darbojas Red Hat Enterprise Linux 8 vai 9, palaidiet komandas šādā secībā:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

PIEZĪME: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Lai atinstalētu Dell Command | Konfigurējiet un noņemiet konfigurāciju files un pagaidu files, run the following command: dpkg –purge command-configure
2. Lai atinstalētu Hapi un noņemtu konfigurāciju files un pagaidu files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Jauniniet Dell Command versiju | Konfigurējiet sistēmā.

PIEZĪME: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files un mapes sistēmā. The files un mapēm nav funkcionālas ietekmes.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar the file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh -nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar the file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Lai jauninātu, palaidiet šādu komandu:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Lai pārbaudītu pašreizējo Dell komandu | Konfigurējiet versiju, dodieties uz noklusējuma instalācijas ceļu un palaidiet:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Šajā nodaļā ir sniegts pārskatsview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Tēmas:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

PIEZĪME: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Priekšnoteikumi

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server lietderīgās kravas.

Pārliecinieties, vai ir izpildītas šādas prasības:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Tiek parādīts instalēšanas vednis.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Noklikšķiniet uz Tālāk.
4. Noklikšķiniet uz Instalēt, lai sāktu instalēšanu.
   The installation completion wizard is displayed.
5. Noklikšķiniet uz Pabeigt, lai pabeigtu instalēšanu.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   PIEZĪME: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file pie URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   PIEZĪME: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file ar sekojošo:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   PIEZĪME: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   PIEZĪME: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

PIEZĪME: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Sāknējama attēla pirmsinstalēšanas vides izveide, izmantojot Windows PE 10.0 un 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. No Microsoft webvietni, lejupielādējiet un instalējiet Windows ADK klienta sistēmā.
   PIEZĪME: Instalēšanas laikā atlasiet tikai Izvietošanas rīki and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Instalējiet Dell Command | Konfigurēt.
4. Integrējiet Dell Command | Konfigurējiet direktoriju struktūru ISO file lai izveidotu sāknējamu ISO attēlu.

Dell Command integrēšana | Konfigurējiet direktoriju struktūru ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Instalējiet operētājsistēmu Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Atveriet komandu uzvedni ar administratora tiesībām.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   PIEZĪME: Pārliecinieties, vai komandā izmantotais ceļš ir Dell Command | ceļš Konfigurēt mapi.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Resursi un atbalsts

Jūs varat piekļūt nepieciešamajiem dokumentiem, izvēloties savu produktu.

1. Dodieties uz Atbalsts | Dell.
2. Noklikšķiniet Pārlūkojiet visus produktus.
3. Noklikšķiniet Software & Solutions.
4. Noklikšķiniet Klientu sistēmu pārvaldība.
5. Noklikšķiniet Dell Command | Configure.
6. Noklikšķiniet Atlasiet šo produktu.
7. Uz view nepieciešamos dokumentus, noklikšķiniet uz vajadzīgā produkta nosaukuma un versijas numura.

PIEZĪME: Ja jums nav aktīva interneta savienojuma, varat atrast kontaktinformāciju par pirkuma rēķinu, pavadzīmi, rēķinu vai Dell produktu katalogu.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Dodieties uz Atbalsts | Dell.
2. Atlasiet savu atbalsta kategoriju.
3. Apstipriniet savu valsti vai reģionu vietnē Izvēlieties valsti/reģionu nolaižamajā sarakstā lapas apakšā.
4. Atlasiet atbilstošo pakalpojumu vai atbalsta saiti, pamatojoties uz jūsu vajadzībām.

Dokumenti / Resursi

DELL Command Configure Software [pdfLietotāja rokasgrāmata Command Configure Software, Configure Software, Software

Atsauces

• Lietotāja rokasgrāmata