ESP32-CAM-MB Wi-Fi Bluetooth kameras izstrādes plates modulis
“
ESP32-CAM-MB WiFi Bluetooth Camera Development Board
Modulis
Specifikācijas:
- Interfeiss: Micro USB
- Processor: Dual-core 32-bit LX6 microprocessor
- Galvenā frekvence: līdz 240 MHz
- Computing Power: Up to 600 DMIPS
- SPI Flash: 32mbit by default
- Internal SRAM: 520 KB
- External PSRAM: 4 MB/8 MB
- Wi-Fi: 802.11b/g/n/e/i
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Interface Support (2Mbps): UART, SPI, I2C, PWM
- TF Card Support: Maximum 4G
- IO Ports: 9
- Serial Port Rate: Default 115200bps
- Spectrum Range: 2400 ~ 2483.5 MHz
Produkta lietošanas instrukcijas:
1. Powering Up the Device:
Connect the ESP32-CAM-MB board to a power source using a Micro
USB kabelis.
2. Connecting to Wi-Fi and Bluetooth:
Follow the provided instructions to connect the board to a Wi-Fi
network and pair it with Bluetooth devices.
3. Image Capture and Transmission:
Utilize the integrated camera module to capture images and
transmit them as needed for your IoT projects.
4. Interfacing with IO Ports:
Utilize the various IO ports available on the board for
connecting external peripherals and sensors.
FAQ:
Q: What is the default serial port rate of the ESP32-CAM-MB
dēlis?
A: The default serial port rate is 115200bps.
Q: What is the maximum TF card support of the board?
A: The board supports TF cards up to a maximum of 4GB.
“`
ESP32-CAM-MB
ESP32-CAM-MB WIFI bluetooth camera development board module
Katalogs
Produkti
1
Galvenās iezīmes
2
Produkta parametri
3
Lietošanas instrukcija
4
Produkti
The ESP32-CAM-MB WiFi Bluetooth Development Board is a multifunctional development board with an integrated ESP32 chip and camera module for IoT projects, especially those applications that require image capture and transmission.
The ESP32-CAM development board, features an ESP32-S chip, an OV2640 camera, micro SD card slot and several GPIOs for connecting peripherals.The module is a small-sized camera module that can work independently as the smallest system. The new WiFi+Bluetooth dual-mode development board designed based on ESP32 features an on-board PCB antenna, two high-performance 32-bit LX6 CPUs with 7-stage pipeline architecture, and an adjustable main frequency range of 80MHz to 240Mhz. ESP32-CAM is an 802.11b/g/n Wi-Fi + BT/BLE SoC module, with ultra-low power consumption, deep ESP32-CAM is an 802.11b/g/n Wi-Fi + BT/BLE SoC module with ultra-low power consumption and deep sleep current as low as 6mA, which makes it suitable for IoT applications with high power requirements. ESP32-CAM is a miniature module with camera function, equipped with OV2640 camera, GPIO for connecting peripherals, and micro-SD card for storing captured images, which can be directly plugged into the backplane.
As an IoT camera module based on the ESP32 chip, the ESP32-CAM-MB combines the functions of a microcontroller unit (MCU) and an image sensor, and is suitable for a wide range of application scenarios that require image capture and wireless transmission. It can be widely used in a variety of IoT occasions, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications, it is an ideal solution for IoT applications.
Performance
Interface:Micro USB Processor: Dual-core 32-bit LX6 microprocessor Main Frequency: Up to 240 MHz Computing power: up to 600 DMIPS SPI Flash: 32mbit by default Internal SRAM: 520 KB External PSRAM: 4 MB/8 MB Wi-Fi: 802.11b / G / n / e / i Bluetooth: Bluetooth 4.2BR/EDR and BLE standards Interface support (2Mbps): UART, SPI, I2C, PWM TF card support: Maximum 4G IO ports: 9 Serial Port Rate: Default 115200bps Spectrum range: 2400 ~ 2483.5 MHz
Camera Sensor: OV2640 image sensor, 2MP Image Output Format: JPEG (only support OV2640), BMP, GRAYSCALE Transmit power: 802.11b: 17 ± 2dBm (@ 11mbps) 802.11g: 14 ± 2dBm (@ 54mbps) 802.11n: 13 ± 2dBm (@ MCS7) Receive sensitivity: CCK, 1mbps: -90dBm CCK, 11mbps: -85dBm 6Mbps (1 / 2BPSK): -88dBm 54Mbps (3/464-QAM): -70dBm MCS7 (65Mbps, 72.2 Mbps): -67dBm
Šī ierīce atbilst FCC noteikumu 15. daļai. Uz darbību attiecas šādi divi nosacījumi: (1) šī ierīce nedrīkst radīt kaitīgus traucējumus un (2) šai ierīcei ir jāpieņem visi saņemtie traucējumi, tostarp traucējumi, kas var izraisīt nevēlamu darbību.
Jebkādas izmaiņas vai modifikācijas, kuras nav nepārprotami apstiprinājusi par atbilstību atbildīgā puse, var anulēt lietotāja tiesības izmantot iekārtu.
Piezīme. Šis aprīkojums ir pārbaudīts un atzīts par atbilstošu B klases digitālo ierīču ierobežojumiem saskaņā ar FCC noteikumu 15. daļu. Šie ierobežojumi ir paredzēti, lai nodrošinātu saprātīgu aizsardzību pret kaitīgiem traucējumiem, uzstādot dzīvojamo telpu. Šis aprīkojums ģenerē un var izstarot radiofrekvences enerģiju, un, ja tas netiek uzstādīts un lietots saskaņā ar instrukcijām, tas var radīt kaitīgus radiosakaru traucējumus. Tomēr nav garantijas, ka konkrētajā instalācijā neradīsies traucējumi. Ja šī iekārta rada kaitīgus traucējumus radio vai televīzijas uztveršanai, ko var noteikt, izslēdzot un ieslēdzot iekārtu, lietotājs tiek mudināts mēģināt novērst traucējumus, veicot vienu vai vairākus no šiem pasākumiem: - Pārorientējiet vai pārvietojiet uztvērēju. antena. - Palieliniet attālumu starp iekārtu un uztvērēju. - Pievienojiet iekārtu kontaktligzdai ķēdē, kas atšķiras no tās, kurai ir pievienots uztvērējs. - Lai saņemtu palīdzību, sazinieties ar izplatītāju vai pieredzējušu radio/TV tehniķi. -Šī iekārta atbilst FCC radiācijas iedarbības ierobežojumiem, kas noteikti nekontrolētai videi. Šis aprīkojums ir jāuzstāda un jādarbina vismaz 20 cm attālumā starp radiatoru un ķermeni.
Dokumenti / Resursi
 |
Electrobes ESP32-CAM-MB Wi-Fi Bluetooth Camera Development Board Module [pdfLietotāja rokasgrāmata ESP32-CAM, ESP32-CAM-MB Wi-Fi Bluetooth Camera Development Board Module, ESP32-CAM-MB, Wi-Fi Bluetooth Camera Development Board Module, Bluetooth Camera Development Board Module, Camera Development Board Module, Development Board Module, Board Module, Module |